Metal Shop Assembler
Saugerties, NY · On-site
$16 - $19.25/hr
Metal Shop Assembler Markertek, a div ... Tower Products Incorporated, where your work truly makes a difference. As a 100% employee-owned ...
Metal Shop Assembler
Saugerties, NY · On-site
$16 - $19.25/hr
Metal Shop Assembler Markertek, a div ... Tower Products Incorporated, where your work truly makes a difference. As a 100% employee-owned ...
Metal Shop Assembler
Saugerties, NY · On-site
$18 - $21/hr
Metal Shop Assembler Markertek, a div ... Tower Products Incorporated, where your work truly makes a difference. As a 100% employee-owned ...
Quick apply
Metal Shop Assembler
Saugerties, NY · On-site
$18 - $21/hr
Metal Shop Assembler Markertek, a div ... Tower Products Incorporated, where your work truly makes a difference. As a 100% employee-owned ...
... assembly, insulation, and installation of sheet metal products and structures. Work will include ... Tower, LaSalle Plaza, and Wells Fargo Center. Specialties Temperature Controls, Plumbing ...
... assembly, insulation, and installation of sheet metal products and structures. Work will include ... Tower, LaSalle Plaza, and Wells Fargo Center. Specialties Temperature Controls, Plumbing ...
AMADA Press Operator
$23 - $30/hr
Experience working with automated tower loading systems. * Exposure to press brake operations and general sheet metal forming. * Familiarity with powder coating, assembly, and related fabrication ...
New
Quick apply
AMADA Press Operator
$23 - $30/hr
Experience working with automated tower loading systems. * Exposure to press brake operations and general sheet metal forming. * Familiarity with powder coating, assembly, and related fabrication ...
New
Welder (A) (Olathe, Kansas (KS), US, 66061)
Olathe, KS · On-site
$31.93/hr
... Assembly): 4:30pm - 1:00am with daily and weekend OT as needed 2nd Shift (Metal Fab): 2:45pm - 11 ... Perform welding based upon tower and/or engineering specs * Perform leak testing * Use an overhead ...
Welder (A) (Olathe, Kansas (KS), US, 66061)
Olathe, KS · On-site
$31.93/hr
... Assembly): 4:30pm - 1:00am with daily and weekend OT as needed 2nd Shift (Metal Fab): 2:45pm - 11 ... Perform welding based upon tower and/or engineering specs * Perform leak testing * Use an overhead ...
Welder (A)
Olathe, KS · On-site
$31.93/hr
... Assembly): 4:30pm - 1:00am with daily and weekendOT as needed 2nd Shift (Metal Fab): 2:45pm - 11 ... Perform welding based upon tower and/or engineering specs * Perform leak testing * Use an overhead ...
Welder (A)
Olathe, KS · On-site
$31.93/hr
... Assembly): 4:30pm - 1:00am with daily and weekendOT as needed 2nd Shift (Metal Fab): 2:45pm - 11 ... Perform welding based upon tower and/or engineering specs * Perform leak testing * Use an overhead ...
Welder (A)
Olathe, KS · On-site
$31.93/hr
... Assembly): 4:30pm - 1:00am with daily and weekend OT as needed 2nd Shift (Metal Fab): 2:45pm - 11 ... Perform welding based upon tower and/or engineering specs * Perform leak testing * Use an overhead ...
Welder (A)
Olathe, KS · On-site
$31.93/hr
... Assembly): 4:30pm - 1:00am with daily and weekend OT as needed 2nd Shift (Metal Fab): 2:45pm - 11 ... Perform welding based upon tower and/or engineering specs * Perform leak testing * Use an overhead ...
2nd Shift - Sub Assembly Machinist
Madera, CA · On-site
$54K - $82K/yr
... assemblies for all Evapco cooling tower and condenser product lines. Uses drawings and ... of metals and material properties • Use, read, and comprehend a tape measure and caliper to ...
2nd Shift - Sub Assembly Machinist
Madera, CA · On-site
$54K - $82K/yr
... assemblies for all Evapco cooling tower and condenser product lines. Uses drawings and ... of metals and material properties • Use, read, and comprehend a tape measure and caliper to ...
2nd Shift - Sub Assembly Machinist
Madera, CA · On-site
$54K - $82K/yr
... assemblies for all Evapco cooling tower and condenser product lines. Uses drawings and ... of metals and material properties • Use, read, and comprehend a tape measure and caliper to ...
2nd Shift - Sub Assembly Machinist
Madera, CA · On-site
$54K - $82K/yr
... assemblies for all Evapco cooling tower and condenser product lines. Uses drawings and ... of metals and material properties • Use, read, and comprehend a tape measure and caliper to ...
Fiber Laser Operator
Mankato, MN · On-site
$25 - $35/hr
About Ameristar Manufacturing Ameristar Manufacturing is a full-service metal manufacturing company ... Automated Load/Unload Tower * Nitrogen Generator Cell * Material Handling Systems * Opportunity to ...
Fiber Laser Operator
Mankato, MN · On-site
$25 - $35/hr
About Ameristar Manufacturing Ameristar Manufacturing is a full-service metal manufacturing company ... Automated Load/Unload Tower * Nitrogen Generator Cell * Material Handling Systems * Opportunity to ...
Fiber Laser Operator
Mankato, MN · On-site
$25 - $35/hr
About Ameristar Manufacturing Ameristar Manufacturing is a full-service metal manufacturing company ... Automated Load/Unload Tower * Nitrogen Generator Cell * Material Handling Systems * Opportunity to ...
Quick apply
Fiber Laser Operator
Mankato, MN · On-site
$25 - $35/hr
About Ameristar Manufacturing Ameristar Manufacturing is a full-service metal manufacturing company ... Automated Load/Unload Tower * Nitrogen Generator Cell * Material Handling Systems * Opportunity to ...
Fiber Laser Operator
$25 - $35/hr
About Ameristar Manufacturing Ameristar Manufacturing is a full-service metal manufacturing company ... Automated Load/Unload Tower * Nitrogen Generator Cell * Material Handling Systems * Opportunity to ...
Fiber Laser Operator
$25 - $35/hr
About Ameristar Manufacturing Ameristar Manufacturing is a full-service metal manufacturing company ... Automated Load/Unload Tower * Nitrogen Generator Cell * Material Handling Systems * Opportunity to ...
Union Energy Storage Ironworker Apprentice - Mojave, CA
Mojave, CA · On-site
$25.93 - $50.68/hr
... in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand ... tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ...
Union Energy Storage Ironworker Apprentice - Mojave, CA
Mojave, CA · On-site
$25.93 - $50.68/hr
... in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand ... tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ...
Union Energy Storage Ironworker Apprentice - Mojave, CA
Mojave, CA · On-site
$25.93 - $50.68/hr
... in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand ... tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ...
Union Energy Storage Ironworker Apprentice - Mojave, CA
Mojave, CA · On-site
$25.93 - $50.68/hr
... in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand ... tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ...
Union Energy Storage Ironworker Apprentice - Irwindale, CA
Irwindale, CA · On-site
$25.93 - $49.26/hr
... in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand ... tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ...
Union Energy Storage Ironworker Apprentice - Irwindale, CA
Irwindale, CA · On-site
$25.93 - $49.26/hr
... in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand ... tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ...
Ironworker Apprentice-Tumbleweed II
Minneapolis, MN · On-site
$25.35 - $48.17/hr
... in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand ... tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ...
Ironworker Apprentice-Tumbleweed II
Minneapolis, MN · On-site
$25.35 - $48.17/hr
... in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand ... tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ...
Ironworker Apprentice-Tumbleweed II
Minneapolis, MN · On-site
$25.35 - $48.17/hr
... in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand ... tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ...
Ironworker Apprentice-Tumbleweed II
Minneapolis, MN · On-site
$25.35 - $48.17/hr
... in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand ... tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ...
Union Energy Storage Ironworker Apprentice - Irwindale, CA
$25.93 - $49.26/hr
... in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand ... tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ...
Union Energy Storage Ironworker Apprentice - Irwindale, CA
$25.93 - $49.26/hr
... in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand ... tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ...
640 Operator
Saint Johns, MI · On-site
$15.75 - $19/hr
Tower preparation for CIP. * Tower Cleaning. * Refill and thread plastic wrap on machine. Fill ... Perform metal detector test. * Perform DI magnet inspections. * Must be able to work HMI. * Fill ...
640 Operator
Saint Johns, MI · On-site
$15.75 - $19/hr
Tower preparation for CIP. * Tower Cleaning. * Refill and thread plastic wrap on machine. Fill ... Perform metal detector test. * Perform DI magnet inspections. * Must be able to work HMI. * Fill ...
640 Operator
$15.75 - $19/hr
Tower preparation for CIP. * Tower Cleaning. * Refill and thread plastic wrap on machine. Fill ... Perform metal detector test. * Perform DI magnet inspections. * Must be able to work HMI. * Fill ...
640 Operator
$15.75 - $19/hr
Tower preparation for CIP. * Tower Cleaning. * Refill and thread plastic wrap on machine. Fill ... Perform metal detector test. * Perform DI magnet inspections. * Must be able to work HMI. * Fill ...
Metal Tower Assembly information
See salary details
$11.30 - $12.26
1% of jobs
$12.26 - $13.22
3% of jobs
$13.22 - $14.18
6% of jobs
$14.18 - $15.14
12% of jobs
$15.33 is the 25th percentile. Wages below this are outliers.
$15.14 - $16.11
15% of jobs
The median wage is $16.86 / hr.
$16.11 - $17.07
17% of jobs
$17.07 - $18.03
17% of jobs
$18.40 is the 75th percentile. Wages above this are outliers.
$18.03 - $18.99
12% of jobs
$18.99 - $19.95
9% of jobs
$19.95 - $20.91
5% of jobs
$20.91 - $21.88
3% of jobs
$11
$17
$21
How much do metal tower assembly jobs pay per hour?
As of Sep 14, 2026, the average hourly pay for metal tower assembly in the United States is $17.14, according to ZipRecruiter salary data. Most workers in this role earn between $15.38 and $18.51 per hour, depending on experience, location, and employer.
What are popular job titles related to Metal Tower Assembly jobs?
For Metal Tower Assembly jobs, the most frequently searched job titles are:
Metal Shop Assembler
Saugerties, NY • On-site
Tower Products
$16 - $19.25/hr
Full-time
Medical, Dental, Vision, Life, Retirement, PTO
Posted 29 days ago
Job description
Metal Shop Assembler
Markertek, a div. Tower Products Incorporated, where your work truly makes a difference. As a 100% employee-owned company, every team member plays a direct role in our success. We're looking for dependable, motivated individuals who take pride in their work, enjoy being part of a supportive team, and want to build a long-term career with a growing organization.
We are currently seeking a Metal Shop Assembler to join our growing team. This position is responsible for fabricating, assembling, and modifying metal products using a wide range of mechanical technologies, materials, and shop equipment. The ideal candidate has hands-on metal fabrication experience, strong attention to detail, and the ability to interpret technical documentation.
Key Responsibilities
Equipment & Tools
Skills & Experience
Competitive Benefits Include
Additional Information
*Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
Monday-Friday, 7:00 AM - 3:30 PM
Full-Time, 40-hour week, On-site
Markertek, a div. Tower Products Incorporated, where your work truly makes a difference. As a 100% employee-owned company, every team member plays a direct role in our success. We're looking for dependable, motivated individuals who take pride in their work, enjoy being part of a supportive team, and want to build a long-term career with a growing organization.
We are currently seeking a Metal Shop Assembler to join our growing team. This position is responsible for fabricating, assembling, and modifying metal products using a wide range of mechanical technologies, materials, and shop equipment. The ideal candidate has hands-on metal fabrication experience, strong attention to detail, and the ability to interpret technical documentation.
Key Responsibilities
- Receive and prioritize daily work order assignments
- Review job Bills of Materials (BOMs) and verify kit inventory
- Reference MPCD and custom work documentation using electronic systems
- Collaborate with the Sales team to support design opportunities while remaining within the established business model
- Fabricate, assemble, and modify metal components using shop equipment and hand tools
- Process returned manufactured products for repair, refurbishment, or restocking
- Maintain a clean, organized, and safe work environment
- Perform other duties as assigned
- All employees are required to adhere to guidelines for safety, PPE, tool use, etc.
- All employees are required to read and follow the employee manual distributed by Tower Products Incorporated and the Quality Policy Statement.
- All personnel wash their hands when shifts are completed
Equipment & Tools
- Mills
- Laser cutter
- Laser engravers
- Drill presses
- Punches
- Press brakes
- Belt sanders
- Hand tools
Skills & Experience
- Experience with connector layout, scribing, punching, drilling, and milling
- Strong understanding of custom metal fabrication and design principles
- Ability to interpret technical drawings and perform complex graphical layouts for wall plates, rack panels, and other metal products
- Strong time management skills and attention to detail
- Solid math and computer skills
- Proficiency with PC-based systems and electronic documentation
- Willingness to learn and use CorelDRAW or similar design software for laser engraving
- Effective verbal and written communication skills
- Aptitude for learning
- Take pride in their work
Competitive Benefits Include
- Medical, dental, and vision insurance
- Life insurance
- Paid time off
- 401(k) retirement plan
- Profit-sharing bonus program
- Employee Stock Ownership Plan (ESOP)
Additional Information
- Tower Products Incorporated
- 100% Employee-Owned
- Located in Saugerties, NY
- Equal Opportunity Employer (EOE)
*Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
Monday-Friday, 7:00 AM - 3:30 PM
Full-Time, 40-hour week, On-site