ZipRecruiter

Log In

1

Manager Additive Manufacturing Jobs in Oceanside, CA

Transition Staffing Group

Be Seen First

Sales Manager

San Diego, CA · On-site

$115K - $140K/yr

Sales Manager - Strategic Account Management Location: California Compensation: $120,000 - $140,000 ... Experience with additive manufacturing is highly desirable. * Familiarity with AS9100 and ITAR ...

New

L3HHCM20

Specialist, Manufacturing Engineer

Carlsbad, CA · On-site

$75K - $96K/yr

This position requires strong technical aptitude, the ability to manage multiple assignments in a ... Create manufacturing fixturing using in-house additive manufacturing resources and other ...

New

L3 Harris

Specialist, Manufacturing Engineer

Carlsbad, CA · On-site

$84K - $156K/yr

This position requires strong technical aptitude, the ability to manage multiple assignments in a ... Create manufacturing fixturing using in-house additive manufacturing resources and other ...

New

L3 Harris

Specialist, Manufacturing Engineer

Carlsbad, CA · On-site

$84K - $156K/yr

This position requires strong technical aptitude, the ability to manage multiple assignments in a ... Create manufacturing fixturing using in-house additive manufacturing resources and other ...

Cypress HCM

Field Service Engineer

San Diego, CA

... additive manufacturing systems. You'll be on the front lines delivering exceptional service ... Develop and manage workflows and release environments using collaborative platforms such as ...

General Atomics

Supplier Quality Engineer

Poway, CA · On-site

... additive manufacturing, and composites, as applicable. * Lead supplier audit readiness and ... Support the internal AS9100 quality management system, including audit readiness, document control ...

next page

Showing results 1-20

All JobsAdditive Manufacturing JobsManager Additive Manufacturing JobsManager Additive Manufacturing Jobs in Oceanside, CA

Manager Additive Manufacturing information

See Oceanside, CA salary details

$40.9K

$102.6K

$153.6K

How much do manager additive manufacturing jobs pay per year?

As of Aug 30, 2026, the average yearly pay for manager additive manufacturing in Oceanside, CA is $102,624.00, according to ZipRecruiter salary data. Most workers in this role earn between $80,200.00 and $122,600.00 per year, depending on experience, location, and employer.

What does a manager additive manufacturing do?

A Manager Additive Manufacturing oversees the operations, strategy, and staff involved in 3D printing and related additive manufacturing processes within an organization. They are responsible for managing production schedules, ensuring the quality of printed components, and implementing new technologies to optimize manufacturing efficiency. This role often involves coordinating teams, managing budgets, and collaborating with engineering and design departments to meet project requirements. The manager also stays updated on industry trends and ensures compliance with safety and regulatory standards.

What are the key skills and qualifications needed to thrive as a manager additive manufacturing?

To thrive as a Manager Additive Manufacturing, you need expertise in additive manufacturing processes, materials science, and engineering principles, often supported by a degree in engineering or a related field. Familiarity with CAD software, 3D printing technologies, and industry-specific certifications like those from SME or ASTM is typically required. Strong leadership, project management, and communication skills distinguish top performers in this role. These skills ensure efficient production, innovation, and effective team coordination in a rapidly evolving manufacturing environment.

What are some common challenges faced by a manager additive manufacturing, and how can they be addressed?

Managers in Additive Manufacturing often encounter challenges such as integrating new technologies, maintaining quality control, and overseeing multidisciplinary teams. Staying updated with rapid advancements in 3D printing and ensuring staff are properly trained is essential. Additionally, balancing cost-effectiveness with innovation and collaborating closely with design, engineering, and production departments are key aspects of the role. Proactive communication and continuous process optimization help address these challenges and drive successful project outcomes.

What is the difference between Manager Additive Manufacturing vs Manufacturing Engineer?

AspectManager Additive ManufacturingManufacturing Engineer
CredentialsTypically requires a bachelor's or master's in engineering, with experience in additive manufacturing and leadership certificationsUsually holds a bachelor's or master's in mechanical, industrial, or manufacturing engineering
Work EnvironmentOversees additive manufacturing teams, manages projects, and collaborates with R&D and production departmentsDesigns, develops, and improves manufacturing processes, often working on production lines or in labs
Industry UsageCommonly employed in industries adopting 3D printing and advanced manufacturing techniquesWidely used across manufacturing sectors for process optimization and product development

The main difference is that the Manager Additive Manufacturing focuses on leading additive manufacturing teams and projects, while the Manufacturing Engineer concentrates on designing and improving manufacturing processes. Both roles require technical expertise, but the manager role emphasizes leadership and strategic oversight.

What are the most commonly searched types of Additive Manufacturing jobs in Oceanside, CA?

The most popular types of Additive Manufacturing jobs in Oceanside, CA are:

What job categories do people searching Manager Additive Manufacturing jobs in Oceanside, CA look for?

The top searched job categories for Manager Additive Manufacturing jobs in Oceanside, CA are:

What cities near Oceanside, CA are hiring for Manager Additive Manufacturing jobs?

Cities near Oceanside, CA with the most Manager Additive Manufacturing job openings:

Manager Additive Manufacturing jobs near you
Infographic showing various Manager Additive Manufacturing job openings in Oceanside, CA as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $102,624 per year, or $49.3 per hour.

Additive Manufacturing Engineer, Directed Energy Deposition (DED)

General Atomics

Poway, CA • On-site

$74K - $96K/yr

Full-time

Re-posted 15 days ago

General Atomics rating

9.0

Company rating: 9.0 out of 10

Based on 39 frontline employees who took The Breakroom Quiz

10th of 72 rated aerospace companies

Job description

Job Summary
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable unmanned aerial systems (UAS) and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.
We have an exciting opportunity for a dynamic and proactive Directed Energy Deposition (DED) Metal Additive Manufacturing Engineer in our Additive Manufacturing (AM) department located in Poway, CA. This position will support the DED metal AM production and development efforts at GA-ASI in design (DfAM), process and parts qualification, first article, metrology/inspection, tests, technology assessment and novel DED manufacturing technology development. Although it is part of the Manufacturing Operations group, this position will be a key interface role between various other internal and external stakeholders such as Design engineering, Materials & Processes engineering, Structures, Programs management, and Supply Chains as serving as subject matter expert (SME) to help integrate DED metal AM into GA-ASI's products and processes. This position will provide the candidate with a lead role opportunity into the growth of DED metal AM at GA-ASI.
DUTES AND RESPONSIBILITIES:
  • Subject Matter Expert (SME) on DED metal technologies, with a near term emphasis on wire-based DED technologies and associated materials.
  • Responsible for AM application rapid development and rate production manufacturing workflow, qualification, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
  • Support manufacturing production planning and coordination, execution and operations process development.
  • Support and lead the planning and implementation of AM (incl. post-processing) supply chain, equipment and associated processes and safety.
  • Strategize, lead and execute development plans for novel DED convergent manufacturing systems applied to UAS structures.
  • Provide production support to internal stakeholders involved in the manufacturing processes associated with DED AM part production and post processing, including interfacing with external strategic suppliers.
  • Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
  • Development, review and/or modifications of AM DED specification documentation with key Materials & Process stakeholders.
  • Review engineering drawings, and provide expertise on metal DED during engineering review processes and support new DED application development and risk reduction activities.
  • Key interface with engineering stakeholders such as design, materials, process and quality.
  • Support and lead technology exploration, assessment and incubation.
  • Work closely with DfAM engineering on manufacturing/production operations, and assist with design engineering's knowledge transfer and teaching efforts.
  • Disposition non-conforming parts, identify root cause analysis, and implement corrective and/or preventive action to reduce scrap and rework.
  • Collaboratively lead projects for new application development related to DED AM technologies.
  • Participation in internal and external AM group representation (e.g. conferences, collaboration groups, executive management reviews, etc.)
  • Collaborate with Design Engineering during development, prototype and first article manufacturing.
  • Support with metal DED AM supplier qualification, relationships and visits.
  • Support in growth strategy of metal DED AM within AM department and across GA divisions.
We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.
Job Qualifications
  • Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education.
  • Extensive experience with Directed Energy Deposition (DED) technologies metal AM as a designer, and/or as a user of DED to manufacture industrial parts.
  • Experience with the entire metal DED AM production workflow from business benefits considerations, design, pre-print considerations and planning, printing, post-processing and qualification process. Specific interest in DED-wire based processes using Titanium and Aluminum materials.
  • Experience with metal DED AM printers and associated post-processing equipment and safety procedure
  • Adjacent working knowledge of some other key metal AM technologies, and their associated characteristics and applicability/use cases (e.g. metal LPBF, polymer powder SLS, polymer filament FDM/FFF, etc.).
  • Working knowledge of most of AM-relevant metrology and heat treatment technologies applied to metal-DED parts.
  • Experience with Design for Additive Manufacturing (DfAM), specifically related to metal DED AM. Ability to demonstrate/provide examples of designs achieved or involved with. This assumes some level of proficiency with a major CAD platform (e.g. Siemens Nx, CREO, CATIA, ProE, etc.)
  • Experience with metal DED AM suppliers (materials and hardware providers, software providers, contract manufacturers, etc.)
  • Background knowledge of conventional manufacturing processes (complementary to metal DED AM, such as CNC machining, casting, forging, welding, etc.)
  • Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.
  • Ability to form and foster rich AM networking and keep engaged.
  • Experience with Microsoft Office PowerPoint, Project, Excel and Visio.
  • Experience with MRP systems is an advantage, (e.g. SAP).
  • Must be able to work both independently and in a team environment.
  • Must be self-driven, like to innovate, and with desire to increase his/her knowledge.
  • Ability to influence others, develop a plan and rally a team around it, lead small team.
  • Able to work extended hours occasionally, and travel occasionally as required.
  • Ability to obtain and maintain DoD Secret Clearance is required.

What General Atomics employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

General Atomics logo

About General Atomics

Sourced by ZipRecruiter

General Atomics (GA), and its affiliated companies, is one of the world's leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies.

Industry

Space research administration

Company size

10,000+ Employees

Headquarters location

San Diego, CA, US

Year founded

1955

View All General Atomics Jobs

Apply