1

Machine Painter Jobs in Calgary, AB (NOW HIRING)

... painting, and housekeeping for assigned properties HOURS OF OPERATION * Rotating shift schedule ... and fax machines. Regularly required to travel outside between properties in varying weather ...

... painting, and housekeeping for assigned properties HOURS OF OPERATION * Rotating shift schedule ... and fax machines. Regularly required to travel outside between properties in varying weather ...

... parts and paint products using a forklift, pallet jack, or other power equipment, * Use an RF ... This position requires individuals to constantly be on their feet expect when operating machinery.

... painting, and housekeeping for assigned properties HOURS OF OPERATION * Rotating shift schedule ... and fax machines. Regularly required to travel outside between properties in varying weather ...

Showing results 21-24

Machine Painter information

What are the key skills and qualifications needed to thrive as a machine painter?

To thrive as a Machine Painter, you need expertise in surface preparation, paint application techniques, and a good understanding of safety protocols, often supported by a high school diploma or equivalent. Familiarity with spray guns, air compressors, and protective equipment, as well as certifications such as OSHA safety training, are commonly required. Attention to detail, manual dexterity, and the ability to work independently or in teams are important soft skills for this role. These competencies ensure high-quality finishes, safe work environments, and efficient production processes in industrial painting settings.

What are some common challenges faced by machine painters, and how can they be managed?

Machine Painters often encounter challenges such as maintaining consistent paint quality, handling complex machinery shapes, and adhering to strict safety standards. These issues can be managed by carefully preparing surfaces, using proper masking techniques, and regularly calibrating spray equipment. Additionally, effective communication with team members and supervisors helps ensure efficient workflow and timely resolution of any issues that arise during the painting process.

What is a machine painter?

Machine painters are skilled workers who apply paint, coatings, or finishes to machinery and industrial equipment. They typically use spray guns, brushes, or rollers to ensure an even and protective layer over metal or other surfaces. Their responsibilities may also include preparing surfaces, mixing paint, masking areas, and following safety protocols to prevent accidents. Machine painters play a crucial role in maintaining the durability and appearance of manufacturing equipment. They often work in factories, workshops, or industrial plants.

What is the difference between Machine Painter vs Spray Painter?

AspectMachine PainterSpray Painter
CredentialsHigh school diploma, some certifications in painting or safetyHigh school diploma, certifications in spray painting techniques
Work EnvironmentFactories, manufacturing plants, industrial settingsConstruction sites, automotive shops, industrial facilities
Job TasksOperating painting machines, applying coatings with equipmentManual spray painting, surface preparation, finishing
Industry UsageManufacturing, industrial productionAutomotive, construction, maintenance

Machine Painters primarily operate automated or semi-automated painting equipment in industrial settings, focusing on efficiency and consistency. Spray Painters manually apply paint using spray guns, often in construction or automotive environments. Both roles require safety certifications and knowledge of painting techniques, but their work environments and methods differ significantly.

Full-time

Posted 23 days ago


Cushman & Wakefield rating

7.4

Company rating: 7.4 out of 10

Based on 159 frontline employees who took The Breakroom Quiz

110th of 202 rated real estate companies


Job description

Job Title

Operating Engineer

Job Description Summary

Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties

Job Description

HOURS OF OPERATION

  • Rotating shift schedule, Monday-Friday between 7:00 a.m. and 6:00 p.m.

  • Weekend availability required as part of the oncall rotation

IMPORTANT EDUCATION

  • 4th Class Power Engineer Certificationrequired

  • High School Diploma of GED Equivalent

  • Graduate of apprentice program or trade school preferred

IMPORTANT EXPERIENCE

  • 3+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting

ESSENTIAL FUNCTIONS AND RESPONSIBILITIES

  • Perform all plumbing, electrical, or HVAC requirements of the building(s)

  • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.

  • Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings

  • Verify field conditions and perform any necessary repairs or adjustments

  • Monitor Energy Management

  • Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property

  • Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)

  • Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.

  • Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris

  • Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management

  • Document and report activities to supervisor

  • Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns

  • Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits

  • Complete all required C&W Safety Training as scheduled annually

  • Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours

ADDITIONAL ELIGIBILITY QUALIFICATIONS

  • Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)

  • May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements

  • Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)

  • Basic Computing Skills in Outlook, Excel & Word

  • Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.

  • Knowledgeable in energy management systems, techniques and operations.

  • Thorough knowledge in all building systems operations, maintenance and repair

  • May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties

WORK ENVIRONMENT

This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.

PHYSICAL DEMANDS

  • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

  • Must have ability to frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices

  • Involves movement between departments, floors, and properties to facilitate work

OTHER DUTIES

This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.


The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.
The company will not pay less than minimum wage for this role.
The compensation for the position is: $ 72,250.00 - $85,000.00Cushman & Wakefield is committed to equity in employment and our goal is to have a diverse, inclusive, and barrier-free workplace. If you are a person with a disability and need the job posting in an alternative format or any other accessible accommodations during the hiring process, please email your request to canadarecruitment@cushwake.com. Please refer to the job title and job location when you contact us.Cushman & Wakefield s'engage a respecter l'equite en matiere d'emploi. Notre objectif est d'offrir un milieu de travail diversifie, inclusif et exempt d'obstacles. Si vous etes une personne handicapee et que vous avez besoin de recevoir l'offre d'emploi dans un autre format ou d'acceder a toute autre mesure d'adaptation au cours du processus d'embauche, veuillez soumettre votre demande par courriel a canadarecruitment@cushwake.com. Veuillez mentionner le titre de poste et le lieu de travail au moment de communiquer avec nous.INCO: "Cushman & Wakefield"

What Cushman & Wakefield employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom