ZipRecruiter

Log In

1

Live In Aircraft Quality Control Inspector Jobs in Rochester, NY

Graham Corporation

Inspector NDE I

Batavia, NY · On-site

$22 - $29/hr

Inspector NDE I Reports To: Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt ... Technical Trades School in Welding or Inspection * High school diploma or GED * NDT Level I ...

Sims Limited

Inspector

North Chili, NY · On-site

Inspect materials to confirm compliance with internal quality control standards and applicable regulations. * Apply approval or rejection markings as needed and document inspection findings in ...

Apidel Technologies

Inspector I

Rochester, NY

High School Diploma or GED 2 years experience in quality inspection Basic Computer Skills Excellent Communication Skills Preferred Qualifications: Experience with sheet and plate material Experience ...

Graham Manufacturing

Inspector NDE I

Batavia, NY · On-site

$22 - $29/hr

Inspector NDE I Reports To: Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt ... Technical Trades School in Welding or Inspection * High school diploma or GED * NDT Level I ...

Graham Manufacturing

Inspector NDE II

Batavia, NY · On-site

$25 - $39/hr

Inspector NDE II Reports To: Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt ... Technical Trades School in Welding or Inspection * High school diploma or GED * NDT Level II ...

New

Graham Manufacturing

Inspector NDE II

Batavia, NY · On-site

$25 - $39/hr

Inspector NDE II Reports To: Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt ... Technical Trades School in Welding or Inspection * High school diploma or GED * NDT Level II ...

New

previous pagenext page

Showing results 21-40

All JobsLive In Aircraft Quality Control Inspector JobsLive In Aircraft Quality Control Inspector Jobs in Rochester, NY

Live In Aircraft Quality Control Inspector information

See Rochester, NY salary details

$12

$26

$51

How much do live in aircraft quality control inspector jobs pay per hour?

As of Aug 17, 2026, the average hourly pay for live in aircraft quality control inspector in Rochester, NY is $26.99, according to ZipRecruiter salary data. Most workers in this role earn between $18.27 and $31.06 per hour, depending on experience, location, and employer.

What are some typical challenges faced by a live in aircraft quality control inspector, and how can they be effectively managed?

Live In Aircraft Quality Control Inspectors frequently encounter challenges such as managing tight maintenance schedules, ensuring strict compliance with aviation regulations, and maintaining clear communication with maintenance teams. Because they often reside on-site or near the hangar, inspectors must be adaptable to varying shifts and responsive to urgent issues that may arise outside regular hours. Building strong working relationships with mechanics and engineers, staying updated on regulatory changes, and developing effective time-management strategies can help address these challenges and maintain high safety standards.

What is a live in aircraft quality control inspector?

A Live In Aircraft Quality Control Inspector is a professional responsible for ensuring that aircraft maintenance, repairs, and overhauls meet strict safety and quality standards. They typically reside on-site or near the hangar to provide continuous oversight throughout maintenance operations. Their duties include inspecting aircraft components, reviewing maintenance records, conducting tests, and verifying compliance with aviation regulations. By identifying defects or non-compliance issues, they help ensure the safety and airworthiness of aircraft before they return to service.

What are the key skills and qualifications needed to thrive as a live in aircraft quality control inspector, and why are they important?

To thrive as a Live In Aircraft Quality Control Inspector, you need in-depth knowledge of aviation maintenance, safety regulations, and quality assurance procedures, typically supported by an FAA Airframe and Powerplant (A&P) certificate or equivalent. Familiarity with aircraft maintenance tracking systems, inspection tools, and regulatory documentation is essential. Attention to detail, strong analytical thinking, and effective communication are crucial soft skills for identifying issues and coordinating with engineering teams. These competencies ensure aircraft safety, regulatory compliance, and operational reliability within the aviation industry.

What are the most commonly searched types of Aircraft Quality Control Inspector jobs in Rochester, NY?

The most popular types of Aircraft Quality Control Inspector jobs in Rochester, NY are:

What cities near Rochester, NY are hiring for Live In Aircraft Quality Control Inspector jobs?

Cities near Rochester, NY with the most Live In Aircraft Quality Control Inspector job openings:

Live In Aircraft Quality Control Inspector jobs near you

Inspector NDE I

Graham Corporation

Batavia, NY • On-site

$22 - $29/hr

Full-time

Re-posted 11 days ago

Job description

Job Type
Full-time
Description
Job Title: Inspector NDE I
Reports To: Quality Control Supervisor
FLSA Status & EEO Code: Non-Exempt & Technician
Division/Department: GHM/Quality
Level of Work: Level I
Position Summary:
The Inspector NDE I (RT) performs inspections with supervision and mentoring. Qualified to set up and calibrate equipment and interpret and evaluate results as per applicable codes, standards, and specifications. Should be familiar with technique limitations. Organize and report the results. Should exercise assigned responsibility for on-the-job training and guidance of trainees and Level I personnel. Inspects components, assemblies, and related paperwork to ensure compliance with contract specifications. Ensures that no non-conforming or rejected product gets shipped to the end user or customer. Focused on providing the highest quality products to customers. Second shift position.
Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed
  • Utilize the drawings and specifications to develop a plan for basic manual inspections.
  • Evaluate parts to ensure that they meet the specified requirements per the inspection plans.
  • Complete the inspection step on the router to properly indicate pass/fail and note the time to ensure the inspection results are traceability to the appropriate inspector
  • Knowledge of proper inspection techniques required to obtain accurate results.
  • Perform dimensional inspection on precision machined products and assemblies unassisted.

Follow instructions - oral and/or written
  • Can properly read all blueprint and work instructions
  • Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification.
  • Performs other duties as assigned by the Quality Control Supervisor or his/her designate.

Safety & House-keeping
  • Work may require use of scaffold, ladders, forklift, and/or scissor lift.
  • Maintains a clean work area with no clutter.
  • Practices safety at all times while at work.
  • Follows safety policies and procedures and speaks up when others are non-compliant.
  • Wears all safety equipment for area of work.

Continual Improvement suggestions
  • Keeps an open mind to others continuous improvement suggestions
  • Bring continuous improvement suggestions to the appropriate team member.

Professional Development
  • Demonstrates initiative, positive attitude, and enthusiasm for the job
  • Will follow up with supervisor on professional development goals and opportunities
  • Takes an interest and lets it be known that they have a desire to grow with the company

Qualifications:
To qualify for this position, an individual must possess the knowledge, training, experience and abilities required.
Education and Training
  • Technical Trades School in Welding or Inspection
  • High school diploma or GED
  • NDT Level I Certification in RT per ASNT SNT-TC-1A

Experience:
  • NDT Experience in RT with required hours (840).
  • NDT Training with required hours (80).
  • NDT Experience in total hours (1600).
  • Hours can be verified and recorded per ASNT SNT-TC-1A.

Other:
  • Must be willing to work overtime as required.
  • Local travel may be required.
  • Second shift position

Skills:
To perform the job successfully, an individual should demonstrate the following competencies:
  • Must have proficiency in MS office applications including spreadsheet, enterprise resource planning, database, and specialized application software.
  • Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site.
  • Strong written and verbal communication skills required.
  • Strong organization and time management skills.
  • High attention to detail.
  • Demonstrate behavior consistent with company values.
  • Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements.
  • Adheres to safety and regulatory program requirements, policies, and procedures; promptly reports safety/health concerns; utilizes personal protective equipment as required; maintains organized, clean work environment.
  • Experience reading technical drawings desired with a drive to be detail oriented and willingness to learn specification requirements.
  • Have basic knowledge of GD&T principal and working knowledge of a variety of machining processes.

Physical and Mental Demands:
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors.
  • Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure.
  • Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration.

Salary Description
$22.00 - $29.00

Apply