ZipRecruiter

Log In

1

Internship Wind Turbine Rope Access Jobs in Michigan

Vestas

Wind Technician II- Bad Axe, MI

Bad Axe, MI · On-site

Key Responsibilities • Maintain and repair wind turbines with your team to keep communities ... Training & Equipment Vestas invests in your growth, providing access to comprehensive training ...

next page

Showing results 1-20

All JobsWind Turbine Rope Access JobsInternship Wind Turbine Rope Access JobsInternship Wind Turbine Rope Access Jobs in Michigan

Internship Wind Turbine Rope Access information

What is an internship wind turbine rope access?

An Internship Wind Turbine Rope Access is a training position where interns learn to perform maintenance, inspection, and repairs on wind turbines using specialized rope access techniques. This role involves working at heights and requires knowledge of safety protocols and climbing equipment. Interns assist experienced technicians, gaining hands-on experience in the wind energy sector and learning how to safely navigate turbine towers. The internship provides valuable skills for a career in renewable energy and industrial rope access.

What does an internship wind turbine rope access do?

During a Wind Turbine Rope Access internship, you can expect to assist experienced technicians in performing inspections, maintenance, and minor repairs on wind turbines at height using specialized rope access techniques. Interns typically help with equipment setup, safety checks, and data collection, while learning industry-standard safety procedures and rope rigging methods. The role often involves working in teams in outdoor environments, adapting to changing weather conditions, and closely following safety protocols. This hands-on experience is valuable for understanding the physical and technical demands of the renewable energy sector.

What skills and qualifications are needed for an internship wind turbine rope access?

To thrive in an Internship Wind Turbine Rope Access role, you need a basic understanding of mechanical and electrical systems, physical fitness, and typically a high school diploma or technical training. Familiarity with rope access techniques, safety harnesses, and certifications such as IRATA or GWO Working at Heights are commonly required. Strong teamwork, attention to detail, and effective communication skills help ensure safety and efficient task completion in challenging environments. These skills and qualifications are critical to maintaining safety standards and ensuring reliable turbine maintenance in a physically demanding and high-risk setting.

What is the difference between Internship Wind Turbine Rope Access vs Wind Turbine Technician?

AspectInternship Wind Turbine Rope AccessWind Turbine Technician
CertificationsBasic safety and rope access certificationsAdvanced safety, technical, and maintenance certifications
Work EnvironmentSupervised, entry-level, on-site trainingFull-time, hands-on maintenance and repair work
Job FocusLearning and assisting with rope access tasksPerforming repairs, inspections, and troubleshooting

Internship Wind Turbine Rope Access roles are entry-level positions focused on training and gaining experience in rope access techniques. Wind Turbine Technicians are experienced professionals responsible for maintenance and repairs. The internship provides foundational skills, while technicians perform full operational duties.

What cities in Michigan are hiring for Internship Wind Turbine Rope Access jobs?

Cities in Michigan with the most Internship Wind Turbine Rope Access job openings:

Internship Wind Turbine Rope Access jobs near you

814 - General Application - TAR- NDT Technicians with UTT, MT, RT, PT, Rope Access & NDT Assistants

Apave

Taylor, MI • On-site

Temporary

Medical, Dental, Vision, Retirement, PTO

Re-posted 14 days ago

Job description

Apave America is seeking Local residents in or near Detroit/Toledo regions.
NDT professionals whose focus is MT/PT/UTT, Rope Access. Applicants who also bring any of the following will be strongly prioritized:
Requirements:
  • Valid MT/PT certifications (Level I or II depending on role).
  • ASNT ISQ UTT Certification required for UTT roles.
  • State carded RT credentials
  • Strong understanding of refinery safety and inspection environments.
  • Reliable, safety-focused, and able to work in a nested refinery setting.

Preferred Experience:
  • Weld-quality and profile RT experience
  • Experience with digital radiography (DR) systems

In this role, the Rope Access is responsible for carrying out standard rope access operations under the direct supervision of an authorized Level III rope access supervisor. The technician will use Industrial Rope Access methods and related equipment to access and complete a wide variety of inspection, maintenance and other industrial work tasks while on ropes or in difficult access areas. Technicians must have the ability to perform work that is physically demanding, have good communication skills and the ability to assimilate a large amount of new information. Responsibilities may also include rescue operations, technical reports and administrative tasks. Work hours, locations, shifts and nature of work assignments vary greatly, and travel may be required.
In this role, the NDT Level II RT Technician must have sufficient technical knowledge and skills to be qualified to set up and calibrate equipment and to interpret and evaluate results with respect to applicable codes, standards, and specifications. The RT Level II must be thoroughly familiar with the scope and limitations of the methods for which qualified and shall exercise assigned responsibility for on-the-job training and guidance of trainees and RT Level I personnel. The RT Level II must be able to organize, and report results of NDT tests.
In this role, the NDT Assistant Technician, (or Non-Destructive Testing Assistant), will primarily assist a certified NDT Technician by setting up and operating testing equipment, preparing test areas, performing basic inspections, interpreting initial test results under supervision, maintaining documentation, and ensuring safety protocols are followed during non-destructive testing procedures on materials and structures, all while learning the fundamentals of various NDT methods like Ultrasonic Thickness Testing (UTT), Radiographic Testing (RT), Magnetic Particle Testing (MT), and Penetrant Testing (PT).
Qualifications, Experience and Requirements:
  • High School Diploma or equivalent is required
  • Must be at least eighteen (18) years of age
  • Current IRRSP Card or State Card required for Radiographers
  • SNT Level II certification in RT required for Radiographers
  • UTT technicians must hold the ASNT ISQ UTT Certification
  • SNT certifications in MT/PT/UTT/PMI considered an asset
  • Weld-quality profile RT Techs with state cards and digital radiography experience preferred
  • Must provide proof of classroom training hours in RT
  • Must have 40 hours of Radiation Safety Training
  • Must be capable of following verbal and written instructions
  • Capable of training assistant radiographers
  • Current SPRAT and/or IRATA Rope Access certification will be considered an asset
  • Valid Driver's License and pre-access drug and alcohol testing required
  • Pre-employment background checks will be required

Work Conditions:
  • Field duties require indoor/outdoor work in diverse industrial environments with varying weather conditions
  • Interaction with a wide range of stakeholders
  • Working in a plant and/or shop areas around production machinery with extreme noise levels
  • May be required to work from various levels of heights and/or in close, confined spaces for long periods of time
  • Must be able to wear safety equipment as required by the safety department for personal protection (PPE)

Physical and Mental Requirements:
  • Ability to lift, move and carry objects weighing 75 lbs. repeatedly
  • Must be able to walk, stand, bend, reach, and climb
  • Must be able to work indoors/outdoors in all weather conditions
  • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines
  • Must be able to stand for extended periods, lift heavy objects, and work in various environments including from heights and confined spaces
  • Sufficient vision or other powers of observation, with or without reasonable accommodation, which permit the employee to investigate
  • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office job duties
  • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permit the employee to perform in-field or office job duties
  • Ability to maintain focus and multitask effectively
  • Exhibits sensible and responsible behavior

Benefits:
  • Dental Insurance.
  • Vision Insurance.
  • Health Insurance.
  • Paid Time Off.
  • 401(K) W/Matching.
  • Flexible Spending Account.
  • Health Savings Account.

NOTE: To be considered, applicants must be able provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification.
*** Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. ***
We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Apply