ZipRecruiter

Log In

1

Internship Ski Design Engineer Jobs in Utah (NOW HIRING)

MCM Engineering

Senior Design Engineer

Cedar City, UT · On-site

$85K - $105K/yr

Serve as a technical resource and mentor for Design Engineers and Engineering Interns. * Provide guidance on complex design challenges, protection schemes, control circuits, and customer requirements.

New

AECOM

Transit/Rail Design Engineer

Murray, UT · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Immediately adjacent to the Wasatch Mountains and 30 minutes from 10 ski resorts, Salt Lake City ... Ability to prepare engineering design reports and construction drawings for highway, roadway ...

AECOM

Transit/Rail Design Engineer

Murray, UT · Hybrid

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Immediately adjacent to the Wasatch Mountains and 30 minutes from 10 ski resorts, Salt Lake City ... Ability to prepare engineering design reports and construction drawings for highway, roadway ...

Atonom

AI Workflow & Design Engineer

Provo, UT · On-site

$60K - $90K/yr

  • Medical

  • PTO

AI Workflow & Design Engineer, Marketing | Full-Time | On-Site (Provo, UT) About Atonom At Atonom ... You have up to 2 years of experience or relevant internships. * Demonstrably design-capable: You ...

Atonom

AI Workflow & Design Engineer

Provo, UT · On-site

  • Medical

  • PTO

AI Workflow & Design Engineer, Marketing | Full-Time | On-Site (Provo, UT) About Atonom At Atonom ... You have up to 2 years of experience or relevant internships. * Demonstrably design-capable: You ...

Atonom

AI Workflow & Design Engineer

Provo, UT · On-site

  • Medical

  • PTO

Salary: $60,000 to $90,000 AI Workflow & Design Engineer, Marketing | Full-Time | On-Site (Provo ... You have up to 2 years of experience or relevant internships. * Demonstrably design-capable: You ...

Atonom

AI Workflow & Design Engineer

Provo, UT

  • Medical

  • PTO

AI Workflow & Design Engineer, Marketing | Full-Time | On-Site (Provo, UT) About Atonom At Atonom ... You have up to 2 years of experience or relevant internships. * Demonstrably design-capable: You ...

Raytheon

RF Design Electrical Engineer I (Onsite)

Provo, UT · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

At RTX , our internships, co-ops and full-time careers provide an exceptional foundation to work on ... The Effector RF Design Department is seeking an Electrical Engineer I for an RF design position to ...

next page

Showing results 1-20

All JobsSki Design Engineer JobsInternship Ski Design Engineer JobsInternship Ski Design Engineer Jobs in Utah

Internship Ski Design Engineer information

What is the difference between Internship Ski Design Engineer vs Ski Design Engineer?

AspectInternship Ski Design EngineerSki Design Engineer
QualificationsEnrolled in or recent graduate of relevant engineering or design programBachelor's or master's in mechanical, industrial, or ski equipment engineering
Work EnvironmentInternship programs, entry-level projects, supervised tasksFull-time, professional role with independent responsibilities
ResponsibilitiesAssist in ski design, prototype testing, data collectionLead design projects, optimize ski performance, collaborate with manufacturing

The main difference is that an Internship Ski Design Engineer is a temporary, entry-level position focused on learning and assisting, while a Ski Design Engineer is a full-time professional responsible for designing and improving skis independently.

What are the key skills and qualifications needed to thrive as an internship ski design engineer?

To thrive as an Internship Ski Design Engineer, you need a solid background in mechanical or materials engineering, a grasp of physics, and relevant coursework or projects in product design. Familiarity with CAD software (such as SolidWorks or AutoCAD), prototyping tools, and possibly ski-specific materials is typically required. Creativity, teamwork, and strong communication skills will help you contribute ideas and collaborate effectively with engineers and designers. These skills ensure innovative, high-quality ski products and a smooth integration into the fast-paced, collaborative environment of ski equipment development.

What does an internship ski design engineer do?

An Internship Ski Design Engineer assists with the design, development, and testing of skis and related equipment. They work alongside experienced engineers to create prototypes, analyze materials, and perform performance testing. Interns often use computer-aided design (CAD) software, help with lab experiments, and gather data to improve ski products. This role provides hands-on experience in both engineering concepts and the unique requirements of ski design.
What are the most commonly searched types of Ski Design Engineer jobs in Utah? The most popular types of Ski Design Engineer jobs in Utah are:
What are popular job titles related to Internship Ski Design Engineer jobs in Utah? For Internship Ski Design Engineer jobs in Utah, the most frequently searched job titles are:
What job categories do people searching Internship Ski Design Engineer jobs in Utah look for? The top searched job categories for Internship Ski Design Engineer jobs in Utah are:
Internship Ski Design Engineer jobs near you
Infographic showing various Internship Ski Design Engineer job openings in Utah as of August 2026, with employment types broken down into 67% Full Time, 23% Part Time, 5% Temporary, and 5% Contract. Highlights an 95% In-person, and 5% Hybrid job distribution.

Senior Design Engineer

MCM Engineering

Cedar City, UT • On-site

$85K - $105K/yr

Full-time

Posted yesterday

New

Job description

Job Title
Senior Design Engineer
  • Ensure that the QMS confirms to ISO 9001:2015
  • Ensure processes are delivering intended outcomes
  • Report to Top Management on the performance of the QMS; on opportunities for improvement; on change requirements; on innovations
  • Ensure the promotion of customer focus
  • Ensure the integrity of the QMS is maintained

Roles & Responsibilities
  • Responsible for leading the design, development, and documentation of low- and medium-voltage switchgear and power distribution systems, while providing technical leadership, mentoring engineers, and supporting continuous improvement initiatives within the engineering department.
  • Ensure compliance with relevant industry standards, customer requirements, and MCM quality standards.

Key Responsibilities:
Technical Leadership:
  • Serve as a technical resource and mentor for Design Engineers and Engineering Interns.
  • Provide guidance on complex design challenges, protection schemes, control circuits, and customer requirements.
  • Provide peer reviews of the engineering deliverables of less experienced engineers.
  • Review engineering deliverables for technical accuracy, completeness, and compliance with company standards.
  • Support engineering training and knowledge sharing initiatives.
  • Assist in developing and maintaining engineering standards, templates, and best practices.

Advanced Design Engineering
  • Lead the design and development of complex electrical switchgear systems including general requirements, elevation and plan views, one-line diagrams, schematics, and control circuits.
  • Lead the selection and specification of electrical components and provide guidance on component application, coordination, and compliance with project requirements.
  • Create and revise engineering drawings using CAD software (AutoCAD, AutoCAD Electrical).
  • Ensure designs comply with relevant standards (e.g., IEC, ANSI, UL, IEEE).
  • Collaborate with cross-functional teams including mechanical designers, project managers, and manufacturing teams.
  • Review and interpret customer specifications and provide technical input during submittal, production, and post-shipment phases.
  • Participate in customer technical review meetings and provide engineering expertise during project execution.
  • Support resolution of technical issues during manufacturing, testing, commissioning, and post-shipment activities.

Work Environment:
  • Functions with a high degree of autonomy and technical authority. Expected to independently manage complex projects while providing guidance and support to other engineers.
  • Typical work week - 40 hrs.
  • This is an on-site position unless approval is given by management based on a major life change
  • Willingness to work 10% overtime as needed.
  • Travel is not required for this position.

Qualifications/Knowledge/Skills/Experience
Qualifications
The successful Senior Design Engineer must:
  • Demonstrate advanced technical expertise in switchgear and power distribution system design.
  • Provide technical leadership and mentorship to less experienced engineers.
  • Independently manage complex projects with minimal oversight.
  • Evaluate technical alternatives and make sound engineering decisions.
  • Effectively communicate technical concepts to customers, suppliers, and internal stakeholders.
  • Identify opportunities for process improvements and standardization.
  • Demonstrate accuracy, thoroughness, and impeccable attention to detail and organizational skills while successfully managing many concurrent projects
  • Define problems, collect and interpret data, establish facts, draw valid conclusions, and implement effective solutions in a timely manner
  • Communicate clearly and effectively
  • Read and understand contracts, specifications, technical drawings, procedures, and manuals
  • Approach others in a tactful manner, react well under pressure, treat others with respect and consideration regardless of their status or position, accept responsibility for own action, and follow through on commitments.
  • Use strong problem-solving, analytical, and communication skills through various stages of each project.

Skills/Knowledge/Traits
  • Technical leadership and mentoring ability
  • Sound engineering judgment
  • Decision-making skills
  • Ability to influence without direct authority
  • Continuous improvement mindset
  • Positive attitude
  • Strong work ethic
  • Time management skills
  • Good written and verbal communication skills
  • Problem-solving skills
  • Works well under pressure
  • Team player

Experience & Education
The well-qualified Design Engineer will have:
  • Bachelor of Science degree in Electrical Engineering (preferred) or related engineering discipline.
  • 7+ years of experience in switchgear or power distribution equipment design.
  • Demonstrated experience leading complex projects from concept through manufacturing and testing.
  • Experience reviewing and approving engineering deliverables.
  • Experience mentoring or training engineers.
  • Advanced understanding of low- and medium-voltage systems (up to 38kV).
  • Advanced understanding of electrical protection and control systems.
  • Experience with AutoCAD, AutoCAD Electrical, and Microsoft software
  • Knowledge of relevant electrical standards (IEC, IEEE, UL, NEMA, etc.).
  • Hands-on experience in manufacturing, testing, commissioning, or field service of switchgear (preferred).

Apply