ZipRecruiter

Log In

1

Internship Prototype Design Jobs in Seattle, WA (NOW HIRING)

SpaceX

Mechanical Engineer (Starlink Mobile)

Redmond, WA · On-site

$110K - $135K/yr

Design, prototype, test, and qualify mechanical assemblies in iterative cycles to mature the ... NX, CATIA, or ProE) (internship/project experience is applicable). * 1+ years of experience with ...

SpaceX

Mechanical Engineer (Starlink Mobile)

Redmond, WA · On-site

$110K - $135K/yr

Design, prototype, test, and qualify mechanical assemblies in iterative cycles to mature the ... NX, CATIA, or ProE) (internship/project experience is applicable). * 1+ years of experience with ...

SpaceX

Antenna Engineer (Starlink Mobile)

Redmond, WA · On-site

$145K - $175K/yr

Design of advanced antenna and feed systems in support of next generation phased array antennas and ... Fabricate and characterize prototypes of antennas, feed systems, and radio frequency (RF) front ...

Trunk Tools

Robotics Interns

Redmond, WA

$45/hr

Design and prototype data collection hardware: camera rigs, sensor mounts, teleoperation interfaces, end-effector and wrist-cam assemblies. * Build recording and data-handling scripts (multi-camera ...

SpaceX

Antenna Engineer (Starlink Mobile)

Redmond, WA · On-site

$145K - $175K/yr

Design of advanced antenna and feed systems in support of next generation phased array antennas and ... Fabricate and characterize prototypes of antennas, feed systems, and radio frequency (RF) front ...

SpaceX

Antenna Engineer, Satellites (Starlink)

Redmond, WA · On-site

$145K - $200K/yr

Perform design validation testing of prototype and production designs * Contribute to various ... internship and thesis work acceptable) * 1+ years of experience using one of the 3D EM simulation ...

previous pagenext page

Showing results 21-40

All JobsPrototype Design JobsInternship Prototype Design JobsInternship Prototype Design Jobs in Seattle, WA

Internship Prototype Design information

What is an internship prototype design?

Internship Prototype Design positions are temporary roles typically offered to students or recent graduates, focusing on developing and testing early models (prototypes) of products, systems, or concepts. Interns in these roles work alongside experienced designers and engineers to brainstorm ideas, create prototypes using various materials or digital tools, and gather feedback for further improvement. The main goal is to gain practical experience in the design process and contribute to the development of innovative solutions. Such internships help participants build their portfolios and learn industry-standard design practices.

What types of projects and tasks can I expect to work on during an internship in prototype design?

As an intern in Prototype Design, you can expect to work on a variety of hands-on projects that may include creating physical or digital prototypes, assisting with ideation sessions, and supporting user testing activities. You’ll likely use design software, collaborate with engineers and designers, and help prepare materials for presentations or client reviews. The role often involves rapid iteration and problem-solving, giving you exposure to the full design development process. You'll also gain valuable experience working within multidisciplinary teams, which is essential for building a strong foundation in product or industrial design.

What key skills and qualifications are needed to thrive as an internship prototype designer, and why are they important?

To thrive as an Internship Prototype Designer, you need foundational knowledge in design principles, prototyping methods, and familiarity with product development processes, often supported by coursework in industrial design, engineering, or related fields. Proficiency with tools like CAD software (e.g., SolidWorks, AutoCAD), 3D printing technologies, and rapid prototyping platforms is typically required. Creativity, attention to detail, and strong teamwork and communication skills help you stand out in this collaborative and iterative field. These skills ensure the creation of functional, innovative prototypes and smooth collaboration with cross-functional teams, which are crucial for successful product development.

What is the difference between Internship Prototype Design vs User Experience (UX) Design Intern?

AspectInternship Prototype DesignUser Experience (UX) Design Intern
Required SkillsBasic prototyping tools, design principlesResearch, wireframing, user testing
Work EnvironmentDesign teams, product developmentDesign teams, user research
Industry UsageTech, product companies, startupsTech, digital agencies, startups

Internship Prototype Design focuses on creating prototypes to visualize product ideas, while UX Design Interns work on improving user experience through research and interface design. Both roles often overlap but differ in core tasks and skill emphasis.

What are the most commonly searched types of Prototype Design jobs in Seattle, WA?

The most popular types of Prototype Design jobs in Seattle, WA are:

What are popular job titles related to Internship Prototype Design jobs in Seattle, WA?

For Internship Prototype Design jobs in Seattle, WA, the most frequently searched job titles are:

What job categories do people searching Internship Prototype Design jobs in Seattle, WA look for?

The top searched job categories for Internship Prototype Design jobs in Seattle, WA are:

Internship Prototype Design jobs near you
Infographic showing various Internship Prototype Design job openings in Seattle, WA as of August 2026, with employment types broken down into 87% Full Time, 8% Part Time, and 5% Contract. Highlights an 84% Physical, 5% Hybrid, and 11% Remote job distribution.

Mechanical Engineer (Starlink Mobile)

SpaceX

Redmond, WA • On-site

$110K - $135K/yr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 15 days ago

SpaceX rating

8.7

Company rating: 8.7 out of 10

Based on 149 frontline employees who took The Breakroom Quiz

17th of 72 rated aerospace companies

Job description

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
MECHANICAL ENGINEER (STARLINK MOBILE)
SpaceX is designing a revolutionary new satellite to deliver seamless cellular connectivity worldwide via the Starlink constellation. This satellite will feature SpaceX's largest-ever phased array antenna - designed to launch on Starship and for high-rate production to enable rapid rollout of global coverage. As a Mechanical Engineer on the Starlink Mobile team, you'll be required to tackle a wide range of novel engineering challenges at the intersection of mechanical, electrical, thermal, and antenna design constraints. In this role, you will be given a large amount ownership scope and an unparalleled opportunity to influence the future of the Starlink Mobile program alongside a small team of passionate, top-tier engineers. Your work will span the full hardware lifecycle, from defining design requirements and system architecture to detailed design, analysis, qualification testing, production process development, and on-orbit support.
RESPONSIBILITIES:
  • Design, prototype, test, and qualify mechanical assemblies in iterative cycles to mature the Starlink Mobile system.
  • Collaborate with cross-functional teams to create innovative payload electromechanical interfaces, spanning scales from the full satellite and antenna array to intricate PCB-level details.
  • Partner with internal and external manufacturing teams to scale new projects and technologies into high-volume, cost-effective production.
  • Conduct mechanical analysis at an appropriate level of fidelity (from hand calculations to finite element analysis) to support design trades, optimizations, and decision-making for novel mechanical systems.
  • Demonstrate extreme ownership of the execution and outcomes of design, development, testing, and launch milestones across the hardware lifecycle.

BASIC QUALIFICATIONS:
  • Bachelor's degree in an engineering discipline.
  • 1+ years of experience using computer aided drafting (CAD) software (e.g. NX, CATIA, or ProE) (internship/project experience is applicable).
  • 1+ years of experience with finite element analysis (FEA) (internship/project experience is applicable).

PREFERRED SKILLS/EXPERIENCE:
  • 1+ years of engineering experience working in complex, multi-disciplinary design and build projects (internship experience is applicable).
  • 2+ years of engineering experience (internships, student projects & teams, extracurricular project experience, and professional experience qualify).
  • Strong experience using CAD for both modeling and GD&T compliant manufacturing drawings.
  • Project and/or research-based experience conducting detailed thermal or mechanical analysis with FEA software (e.g. ANSYS, NASTRAN, ABAQUS, etc.).
  • Experience in mechatronics or other cross disciplinary combination of mechanical, electrical, and software skill sets.
  • Prior programming experience (Python, Matlab, C/C++, Excel, etc.).
  • Basic understanding of electrical engineering fundamentals.
  • Interest in working at a nimble engineering organization that requires a scrappy, entrepreneurial approach to accomplish tasks within time & budget constraints.
  • Strong interpersonal and collaborative skills with an enthusiasm for problem-solving.

ADDITIONAL REQUIREMENTS:
  • Ability to work extended hours and weekends as necessary to support critical milestones

COMPENSATION AND BENEFITS:
Pay range:
Mechanical Engineer/Level I: $100,000.00 - $115,000.00/per year
Mechanical Engineer/Level II: $110,000.00 - $135,000.00/per year
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.
Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees in Washington State accrue paid sick time in compliance with state and federal law. Company shuttles are offered to employees for roundtrip travel from select Seattle locations to the SpaceX Redmond office Monday to Friday.
ITAR REQUIREMENTS:
  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

What SpaceX employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

SpaceX logo

About SpaceX

Sourced by ZipRecruiter

Industry

Aerospace product and parts manufacturing, data services, guided missile and space vehicle manufacturing and satellite telecommunications

Company size

1,001 - 5,000 Employees

Headquarters location

Hawthorne, CA, US

View All SpaceX Jobs

Apply