ZipRecruiter

Log In

1

Instrument And Control Engineer Jobs in Colorado

Pae

I&C Engineer 4

Englewood, CO · On-site

$105K - $135K/yr

... loop drawings, control system architecture drawings, instrument datasheets and sizing ... engineering. At least 7 years of job-related experience. Excellent communications and analytical ...

Thorlabs

Applications Engineer II

Lafayette, CO · On-site

$93K/yr

The Applications Engineer II role exists to translate customer needs and market insights into well ... for instrument control desired • Strong problem-solving capability • Strong computer skills ...

Thorlabs

Photonics Engineer II

Lafayette, CO

$110K/yr

The Photonics Engineer II is responsible for driving innovation in applications and systems ... instrument control interfaces using Python, C, and/or C++ Proficient with data analysis software ...

Infleqtion

RF / Electromagnetics Engineer

Boulder, CO · On-site

The engineer will serve as a senior technical contributor responsible for developing RF test ... Develop automation, instrument control, data processing, and reporting workflows for RF/EM test ...

Thorlabs

Photonics Engineer II

Lafayette, CO · On-site

$110K/yr

The Photonics Engineer II is responsible for driving innovation in applications and systems ... instrument control interfaces using Python, C, and/or C++ • Proficient with data analysis ...

Snapchat

Test Engineer, Camera and Sensing

Boulder, CO · On-site

We're looking for a Test Engineer to join the Spectacles team! What you'll do: * Define test and ... Experience with robotics or instrument control automation If you have a disability or special need ...

Snapchat

Test Engineer, Camera and Sensing

Boulder, CO · On-site

We're looking for a Test Engineer to join the Spectacles team! What you'll do: * Define test and ... Experience with robotics or instrument control automation If you have a disability or special need ...

Drawbridge

Sr. Instrumentation Engineer

Denver, CO · On-site

$88K - $156K/yr

Senior Instrumentation Engineer Location: Denver, CO or Tyler, TX (In-Office) Experience: Minimum ... including instrument index, I/O list, datasheets, Cause & Effect Matrix, control philosophy ...

Drawbridge

Sr. Instrumentation Engineer

Denver, CO

Senior Instrumentation Engineer Location: Denver, CO or Tyler, TX (In-Office) Experience: Minimum ... including instrument index, I/O list, datasheets, Cause & Effect Matrix, control philosophy ...

ZAP Engineering

I&C Engineer 3

Lakewood, CO

Provides QA/QC on most department deliverables and inter-departmental checks. * Shares industry ... Capable of populating instrument datasheets for all instruments. * Capable of reading and marking ...

next page

Showing results 1-20

All JobsInstrument And Control Engineer JobsInstrument And Control Engineer Jobs in Colorado

Instrument And Control Engineer information

See Colorado salary details

$30

$57

$85

How much do instrument and control engineer jobs pay per hour?

As of Jul 22, 2026, the average hourly pay for instrument and control engineer in Colorado is $57.34, according to ZipRecruiter salary data. Most workers in this role earn between $44.76 and $65.19 per hour, depending on experience, location, and employer.

What are some typical challenges faced by Instrument and Control Engineers when working on multidisciplinary project teams?

Instrument and Control Engineers often collaborate closely with mechanical, electrical, and process engineering teams. A common challenge is ensuring that control systems are seamlessly integrated with other engineering disciplines, which requires clear communication and a deep understanding of project specifications. Additionally, adapting to rapidly changing project requirements and managing tight deadlines while maintaining safety and compliance standards can be demanding. Building strong working relationships and proactively addressing potential integration issues early in the design phase helps to mitigate these challenges.

What are the key skills and qualifications needed to thrive as an Instrument and Control Engineer, and why are they important?

To thrive as an Instrument and Control Engineer, you need a solid background in electrical or instrumentation engineering, strong analytical skills, and typically a bachelor's degree in a related field. Proficiency with PLCs, DCS systems, SCADA software, and industry standards like ISA is essential, and certifications such as Certified Automation Professional (CAP) can be advantageous. Strong problem-solving abilities, attention to detail, and effective communication skills set top professionals apart in this role. These competencies ensure the safe, efficient, and reliable operation of industrial processes and support ongoing technological advancements.

What is the difference between Instrument And Control Engineer vs Electrical Engineer?

AspectInstrument And Control EngineerElectrical Engineer
CredentialsBachelor's in Electrical, Electronics, or Control Engineering; certifications like Certified Control Systems Technician (CCST)Bachelor's in Electrical Engineering; similar certifications in electrical systems
Work EnvironmentIndustrial plants, manufacturing facilities, process industriesPower plants, electrical design firms, manufacturing
Industry UsageProcess control, automation, instrumentation systemsPower systems, electrical equipment, circuit design
Job FocusDesign, install, and maintain control systems and instrumentationDesign and develop electrical systems and components

While both roles require a background in electrical engineering and similar certifications, the Instrument And Control Engineer specializes in automation, control systems, and instrumentation within industrial settings. In contrast, the Electrical Engineer focuses more broadly on electrical systems, power distribution, and circuit design. Understanding these distinctions helps in choosing the right career path or job search focus.

What does an Instrument and Control Engineer do?

An Instrument and Control Engineer is responsible for designing, developing, installing, managing, and maintaining equipment used to monitor and control engineering systems, machinery, and processes. They ensure that instruments and control systems are reliable, efficient, and operate safely within industrial facilities such as power plants, manufacturing plants, and oil & gas refineries. Their work involves selecting appropriate instruments, integrating control systems, troubleshooting faults, and optimizing processes for performance and safety.
What cities in Colorado are hiring for Instrument And Control Engineer jobs? Cities in Colorado with the most Instrument And Control Engineer job openings:
Instrument And Control Engineer jobs near you
Infographic showing various Instrument And Control Engineer job openings in Colorado as of July 2026, with employment types broken down into 1% As Needed, 73% Full Time, 21% Part Time, and 5% Contract. Highlights an 93% Physical, 1% Hybrid, and 6% Remote job distribution, with an average salary of $119,269 per year, or $57.3 per hour.

RF / Electromagnetics Engineer

Infleqtion

Louisville, CO • On-site

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 17 days ago

Job description

Infleqtion is a global quantum technology company solving the world's most challenging problems. The company harnesses quantum mechanics to build and integrate quantum computers, sensors, and networks. From fundamental physics to leading edge commercial products, Infleqtion enables "quantum everywhere" through our ecosystem of devices and platforms.
POSITION SUMMARY
This role focuses on RF architecture design, electromagnetic structures, and EM measurement/calibration in support of advanced quantum and atomic sensor systems. The engineer will serve as a senior technical contributor responsible for developing RF test environments, designing and characterizing EM structures, contributing to LO and signal-chain architecture, and translating experimental results into clear technical direction and measurable system performance. Much of the test and characterization work is in the RF and microwave regime, while familiarity with lower-frequency design and components is also valuable.
This is a fully onsite role based in Boulder or Louisville, Colorado. The position emphasizes technical ownership, cross-functional coordination, and clear communication of progress and risk to leadership. Prior experience with atomic or quantum sensors is helpful but not required.
JOB RESPONSIBILITIES
The duties and responsibilities outlined below include essential functions of the role. Depending on business needs, this role may perform a combination of some or all of the following duties. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice.
  • Own simulation, design, build, and characterization of electrodes and other RF/EM structures supporting sensor and test system development
  • Develop free-space RF testbeds and controlled RF environments, including requirements definition, design support, build-out, validation, and continuous improvement
  • Define and execute EM measurement and calibration methods for radiated field strength, coupling, shielding, and measurement uncertainty
  • Develop calibration and measurement approaches for controlled-source and signal-of-opportunity field characterization
  • Contribute to RF architecture development across low-frequency through microwave operation, including signal-chain partitioning and interface definition
  • Contribute to local oscillator architecture, generation, and distribution approaches for lower- and higher-frequency operation
  • Evaluate LO leakage, spurious responses, phase noise, and coupling paths, and recommend mitigations
  • Build and maintain LO noise, signal-chain, and system-level link budgets to support design trades and performance analysis
  • Support development of frequency conversion and analog interface approaches, including baseband-to-IF concepts as needed
  • Lead EM simulations to guide hardware design, measurement setup design, and interpretation of test results
  • Define RF performance metrics and comparison frameworks that support clear datasheet-style communication for novel sensing capabilities
  • Assist in the design and execution of directionality characterization experiments and related validation plans
  • Specify requirements for internal or external RF test environments and coordinate with vendors or subcontractors as needed
  • Collaborate with physicists, electrical engineers, mechanical engineers, software engineers, and external partners to integrate technical contributions
  • Develop automation, instrument control, data processing, and reporting workflows for RF/EM test activities
  • Execute hardware bring-up, calibration, troubleshooting, and root-cause analysis across prototype and integrated systems
  • Document designs, test methods, calibration procedures, and results to support technical reviews and future development
  • Communicate technical progress, trade studies, risks, and recommendations clearly to leadership and cross-functional teams
  • Support lab and field testing, proposal activities, customer demonstrations, and other program needs as required

Requirements
QUALIFICATIONS: EDUCATION AND EXPERIENCE
  • BS or MS in Electrical Engineering, Physics, Applied Physics, Electromagnetics, or a related field
  • 5-10+ years of experience in RF, microwave, electromagnetics, antenna, or advanced sensor hardware/system development
  • Demonstrated experience designing and characterizing electrodes, RF/EM structures, test hardware, or related components
  • Experience with free-space or radiated RF measurements, calibration methods, and controlled test environment development
  • Experience contributing to RF architecture or signal-chain design across low-frequency through microwave operation
  • Strong hands-on RF lab skills with instrumentation such as vector network analyzers, spectrum analyzers, signal generators, oscilloscopes, and power meters
  • Ability to take ownership of technical tasks, coordinate with internal teams and subcontractors, and communicate progress and risks effectively
  • Experience using EM simulation and scripting tools to support design, test, automation, and troubleshooting
  • U.S. citizenship preferred due to the nature of customers, programs, and potential export-controlled work
  • This position may require access to information protected under U.S. export control laws and regulations, including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR). Please note that any offer for employment may be conditioned on authorization to receive software or technology controlled under these U.S. export control laws and regulations without sponsorship for an export license

PREFERRED / NICE-TO-HAVE SKILLS
  • Strong Python skills for lab automation, data processing, and technical reporting
  • Experience with HFSS and/or other EM simulation tools for RF and electromagnetic design
  • Experience specifying, designing, or building anechoic chambers, radiated test setups, or other controlled RF test environments
  • Experience with directionality characterization, field mapping, or free-space calibration techniques
  • Experience with low-phase-noise LO chains, synthesizers, mixers, or frequency-conversion architectures
  • Experience with atomic or quantum sensors, government-funded R&D programs, or other advanced sensing applications

Notice to Recruitment Agencies:
Infleqtion does not accept unsolicited resumes from agencies. Infleqtion is not responsible for any fees related to unsolicited resumes.
TRAVEL
Up to 10% travel may be required.
WORKING CONDITIONS and PHYSICAL REQUIREMENTS
Work will normally be performed in an office and laboratory environment and around technical equipment including computers, RF test equipment, and laboratory instrumentation. Able to sit, stand, bend, lift and carry up to 40 pounds without assistance. Able to efficiently use automated office equipment such as laptops, copiers, and printers; able to effectively engage in communications (via phone, computer, or in-person). Any required Personal Protective Equipment will be provided and must be properly used in accordance with company requirements.
Benefits
  • Salary range: $140,000 to $170,000
  • 100% company-paid medical, dental, vision, short/long-term disability
  • Employer-funded Health Savings Account
  • Unlimited PTO
  • 401(k) match
  • Company-paid Life and AD&D Insurance
  • Flexible Savings Account
  • Paid FMLA, Maternity/Paternity Leave
  • Employee Assistance Program
  • Student Loan Repayment
  • Equity Program

Apply