ZipRecruiter

Log In

1

Home Based Cold Forming Tool Design Engineer Jobs

Howmet Aerospace

Manufacturing Engineer (Cold Forming)

Waco, TX · On-site

$64.80K - $83.40K/yr

Specify, design, and qualify forming dies, punches, rolls, fixtures, and machining tooling. * Lead ... Drive tool life improvement and maintenance strategies across multiple facilities. New Product ...

PRYER AEROSPACE LLC

Tool Design Engineer

Tulsa, OK

Design custom tools, jigs, and fixtures for assembly, sheet metal forming, machining, and ... Ability to work with engineering to identify problems with production performance or tool life and ...

GWS Tool Group

Tool Design Engineer

Arden, NC · On-site

Tool Design Engineer Department: Engineering Reports to: Director of Engineering Classification: Non-Exempt Location: Nashville, TN Travel: None Job Summary: The Cutting Tool Designer is responsible ...

GWS Tool Group

Tool Design Engineer

Nashville, TN · On-site

Tool Design Engineer Department: Engineering Reports to: Director of Engineering Classification: Non-Exempt Location: Nashville, TN Travel: None Job Summary: The Cutting Tool Designer is responsible ...

QuickPro Staffing

Tool Design Engineer

Mason, OH

Tool Design Engineer - Direct Hire Opportunity Advanced Manufacturing | 1st Shift | Monday-Friday 7 ... Competitive pay based on experience + strong benefits package. If you have the experience and ...

New

Chipton Ross

Tool Design Engineer

Palmdale, CA · On-site

Job #217883 Chipton-Ross is seeking a Tool Design Engineer for a contract opportunity in Palmdale, CA. BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE) * 10 yrs overall tool design experience for ...

S&C

Tool Design Engineer II

Franklin, WI · On-site

$79.78K - $105.71K/yr

... forming. * Understanding of stress analysis. * Proficiency with 3D CAD systems (Solid Edge ... Frequently you are required to remain in a stationary position and perform desk-based for 8 hours ...

L3HHCM20

Tool Design Engineer

Culpeper, VA · On-site

Manufacturing Engineer (Tool Design Engineer) Job ID: 37906 Job Location: Culpeper, VA Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other ...

Hi-Tek Manufacturing Inc

TOOL DESIGN ENGINEER

Mason, OH · On-site

$90K - $125K/yr

Tool Design Engineer | Mason, OH Hi-Tek Manufacturing is searching for an experienced Tool Design Engineer who wishes to advance his or her career in advanced manufacturing technology by executing a ...

L3HHCM20

Tool Design Engineer

Culpeper, VA

Manufacturing Engineer (Tool Design Engineer) Job ID: 37372 Job Location: Culpeper, VA Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other ...

Judge Group, Inc.

Tool Design Engineer

Palmdale, CA · On-site

$90 - $110/hr

The Tool Design Engineer collaborates closely with manufacturing, engineering, and vendor teams to deliver compliant, production-ready tooling solutions. The position emphasizes hands-on tool design ...

Hi-Tek Manufacturing Inc

TOOL DESIGN ENGINEER

Mason, OH

$90K - $125K/yr

Tool Design Engineer | Mason, OH Hi-Tek Manufacturing is searching for an experienced Tool Design Engineer who wishes to advance his or her career in advanced manufacturing technology by executing a ...

Sandvik

Tool Design Engineer

Arden, NC · On-site

Tool Design Engineer Department: Engineering Reports to: Director of Engineering Classification: Non-Exempt Location: Nashville, TN Travel: None Job Summary: The Cutting Tool Designer is responsible ...

Sandvik

Tool Design Engineer

Nashville, TN · On-site

Tool Design Engineer Department: Engineering Reports to: Director of Engineering Classification: Non-Exempt Location: Nashville, TN Travel: None Job Summary: The Cutting Tool Designer is responsible ...

next page

Showing results 1-20

All JobsHome Based Cold Forming Tool Design Engineer Jobs

Home Based Cold Forming Tool Design Engineer information

See salary details

$53.5K

$90.4K

$133.5K

How much do home based cold forming tool design engineer jobs pay per year?

As of May 30, 2026, the average yearly pay for home based cold forming tool design engineer in the United States is $90,449.00, according to ZipRecruiter salary data. Most workers in this role earn between $73,000.00 and $103,000.00 per year, depending on experience, location, and employer.
What cities are hiring for Home Based Cold Forming Tool Design Engineer jobs? Cities with the most Home Based Cold Forming Tool Design Engineer job openings:
What are the most commonly searched types of Cold Forming Tool Design Engineer jobs? The most popular types of Cold Forming Tool Design Engineer jobs are:
What states have the most Home Based Cold Forming Tool Design Engineer jobs? States with the most job openings for Home Based Cold Forming Tool Design Engineer jobs include:
Home Based Cold Forming Tool Design Engineer jobs near you
Manufacturing Engineer (Cold Forming)

Manufacturing Engineer (Cold Forming)

Howmet Aerospace

Waco, TX • On-site

$64.80K - $83.40K/yr

Full-time

Posted 5 days ago

Howmet Aerospace rating

7.7

Company rating: 7.7 out of 10

Based on 155 frontline employees who took The Breakroom Quiz

46th of 59 rated aerospace companies

Job description

Responsibilities
Job Summary
The Advanced Manufacturing Engineer (Machining & Cold Forming) is responsible for developing, optimizing, and supporting high-volume metal manufacturing processes across multiple manufacturing sites and supplier locations. This role focuses on CNC machining, cold forming, cold heading, rolling, extrusion, and secondary operations. The position requires up to 75% travel to support plant launches, process improvements, tooling validation, and supplier development.
Responsibilities
Machining & Cold Forming Process Engineering
  • Develop, optimize, and validate machining and cold forming processes for high-volume production.
  • Establish process windows using DOE, SPC, and capability studies (Cp/Cpk).
  • Analyze forming loads, material flow, tool wear, and machining performance to improve quality and throughput.
  • Support on-site troubleshooting of production issues at domestic and international manufacturing locations.

Tooling & Equipment
  • Specify, design, and qualify forming dies, punches, rolls, fixtures, and machining tooling.
  • Lead on-site die verifications/tests, machine acceptance, and production ramp-ups.
  • Work directly with OEMs and tool shops to commission new equipment and debug tooling.
  • Drive tool life improvement and maintenance strategies across multiple facilities.

New Product Introduction (NPI)
  • Support NPI activities across multiple plants, including feasibility reviews and process selection.
  • Lead pilot builds, PPAP/FAI, and production launches on-site.
  • Ensure manufacturing readiness through standardized processes and documentation.

Quality & Continuous Improvement
  • Lead root cause analysis and corrective actions for machining and forming defects.
  • Implement Lean and Six Sigma methodologies to reduce scrap, variation, and downtime.
  • Standardize best practices across sites through process documentation and training.

Materials & Supplier Development
  • Partner with material suppliers on wire, bar, heat treatment, and coatings.
  • Conduct supplier process audits and capability assessments.
  • Support sourcing decisions and cost-reduction initiatives through technical expertise.

Cross-Functional Leadership
  • Provide hands-on technical support to operations, maintenance, and quality teams.
  • Train operators and engineers during launches and process changes.

Act as a technical liaison between plants, suppliers, and corporate engineering.
Qualifications
  • Bachelor's degree in manufacturing, mechanical, or industrial engineering (or similar disciplines).
  • 10+ years of experience in machining and/or cold forming environments.
  • Strong understanding of metal forming physics, machining fundamentals, and tooling.
  • Proven experience supporting production in multi-site or supplier-facing roles.
  • Willingness and ability to travel 50%-75%, including extended on-site assignments.

Preferred Qualifications
  • Experience with high-volume cold heading, progressive forming, or precision machining.
  • Knowledge of steels, alloys, heat treatment, and surface coatings.
  • Experience working with global suppliers or international manufacturing plants.
  • Six Sigma Green Belt or equivalent.

Work Environment & Travel
  • 75% travel required to manufacturing plants, tool shops, and supplier locations.
  • Hands-on, shop-floor-focused role with extended time on-site during launches and issue resolution.
  • Remaining time split between home office and engineering documentation.

About Us
Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report. Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube.
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email [email protected]

What Howmet Aerospace employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Howmet Aerospace logo

About Howmet Aerospace

Sourced by ZipRecruiter

Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company's sales for 2021 approximated $5 billion. The Company's primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With nearly 1,150 granted and pending patents, the Company's differentiated technologies promote more fuel efficiency for aircraft and commercial transportation. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Industry

Aviation

Company size

10,000+ Employees

Headquarters location

Pittsburgh, PA, US

Year founded

1888

View All Howmet Aerospace Jobs

Apply