ZipRecruiter

Log In

1

Gun Tester Jobs in Alabama (NOW HIRING)

Neptune

Senior Electronics Technician 2

Tallassee, AL · On-site

Must be in expert in component level soldering with both soldering iron and hot air gun. Must be able to read and understand Electronic Schematics. This person performs a primary role in testing of ...

AAA USA Inc

Wire Harness Technician

Mobile, AL · On-site

$19 - $25.50/hr

Operate assembly equipment including crimping tools, wire strippers, soldering stations, heat guns, and other hand tools. * Conduct continuity, point-to-point, and functional testing using ...

Cornerstone OnDemand

Rough Fab Assembler

Montgomery, AL · On-site

$15.75 - $19.50/hr

... wiring, testing, and final assembly. The RFA will fulfill many roles within the process of ... Screw Gun * Circular Saw * Jigsaw Ability to operate a Fork Lift Good interpersonal skills EOE/M/F ...

Cornerstone Inc.

Rough Fab Assembler

Montgomery, AL · On-site

$13.25 - $16.25/hr

... wiring, testing, and final assembly. The RFA will fulfill many roles within the process of ... Screw Gun * Circular Saw * Jigsaw Ability to operate a Fork Lift Good interpersonal skills EOE/M/F ...

Cornerstone Inc.

Rough Fab Assembler

Montgomery, AL · On-site

$13.25 - $16.25/hr

... wiring, testing, and final assembly. The RFA will fulfill many roles within the process of ... Screw Gun * Circular Saw * Jigsaw Ability to operate a Fork Lift Good interpersonal skills EOE/M/F ...

Cornerstone OnDemand

Rough Fab Assembler

Montgomery, AL · On-site

$15.75 - $19.50/hr

... wiring, testing, and final assembly. The RFA will fulfill many roles within the process of ... Screw Gun * Circular Saw * Jigsaw Ability to operate a Fork Lift Good interpersonal skills EOE/M/F ...

Maven Packaging

Production Team Member WS

Brownsboro, AL · On-site

$14 - $17.25/hr

Nail guns * Staple guns * Forklifts (training provided if needed) * Accurately measure materials ... Ability to learn and accurately read a tape measure (proficiency expected within 60 days; testing ...

MLS Technologies

Mechanical Design Engineer

Troy, AL · On-site

$61K - $82K/yr

Provide engineering support for product design and development of new gun products, line extensions ... testing. * Utilize best practices, including DFM, DFA, stack analysis, etc. and interface with ...

MLS Technologies

Mechanical Design Engineer

Troy, AL

$61K - $82K/yr

Provide engineering support for product design and development of new gun products, line extensions ... testing. *Utilize best practices, including DFM, DFA, stack analysis, etc. and interface with ...

Recruiting Engine (MLS)

Mechanical Design Engineer

Troy, AL

$61K - $82K/yr

Provide engineering support for product design and development of new gun products, line extensions ... testing. * Utilize best practices, including DFM, DFA, stack analysis, etc. and interface with ...

next page

Showing results 1-20

All JobsGun Tester JobsGun Tester Jobs in Alabama

Gun Tester information

See Alabama salary details

$9

$34

$56

How much do gun tester jobs pay per hour?

As of Aug 29, 2026, the average hourly pay for gun tester in Alabama is $34.77, according to ZipRecruiter salary data. Most workers in this role earn between $19.38 and $45.96 per hour, depending on experience, location, and employer.

What is a gun tester?

Gun testers are professionals responsible for evaluating firearms to ensure they meet safety, quality, and performance standards. They inspect, test-fire, and document the condition and functionality of guns, often working for manufacturers, law enforcement agencies, or firearms certification organizations. Their work helps identify defects, verify compliance with regulations, and improve product reliability. Gun testers must follow strict safety protocols and often have backgrounds in firearms technology, engineering, or law enforcement.

What are the key skills and qualifications needed to thrive as a gun tester, and why are they important?

To thrive as a Gun Tester, you need in-depth knowledge of firearms, ballistics, and safety protocols, often supported by formal training in gunsmithing or armorer certification. Familiarity with testing equipment, data recording systems, and industry-standard safety gear is essential. Attention to detail, strong problem-solving skills, and the ability to communicate findings clearly are critical soft skills in this role. These competencies ensure accurate testing, compliance with safety standards, and the reliable evaluation of firearm performance.

What are some common challenges faced by gun testers during product evaluation?

Gun testers often encounter challenges such as ensuring personal safety while handling firearms, maintaining strict adherence to testing protocols, and accurately documenting performance results. They must also stay up-to-date with evolving regulations and standards, which can vary depending on the firearm type and intended market. Additionally, working closely with engineers and designers to provide actionable feedback requires clear communication and attention to detail, as their assessments directly influence product improvements and safety.

How much do gun testers make?

Gun testers typically earn between $30,000 and $70,000 annually, depending on experience, location, and employer. The role often requires knowledge of firearms, safety protocols, and testing procedures, with some positions offering additional benefits or overtime pay.

What are popular job titles related to Gun Tester jobs in Alabama?

For Gun Tester jobs in Alabama, the most frequently searched job titles are:

What job categories do people searching Gun Tester jobs in Alabama look for?

The top searched job categories for Gun Tester jobs in Alabama are:

What cities in Alabama are hiring for Gun Tester jobs?

Cities in Alabama with the most Gun Tester job openings:

Gun Tester jobs near you
Infographic showing various Gun Tester job openings in Alabama as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $72,322 per year, or $34.8 per hour.

Senior Electronics Technician 2

Tallassee, AL • On-site

neptune technologies
Electrical Equipment, Appliance, and Component Manufacturing • 501 - 1,000 employees
Learn more about neptune technologiesexternal

Full-time

Posted 25 days ago

Job description

Position Summary:

As an essential part of the R&E Team, the Sr. Electronics Technician II is a leadership position in the Electronics Lab, responsible for mentoring less experienced technicians, fostering a positive work environment, and helping facilitate lab operation.  Must be in expert in component level soldering with both soldering iron and hot air gun.  Must be able to read and understand Electronic Schematics. This person performs a primary role in testing of new products for compliance with company design and certification standards and is responsible for design validation testing of Neptune products.  In addition, this individual will automate routine tests as necessary, design/build custom fixtures, oversee equipment maintenance, perform root cause investigation, and other duties assigned by the Electronics Lab Supervisor.  Under guidance of Project Engineers, the Sr. Electronics Technician II often assists with preparing engineering documentation – including specifications, process documents, test procedures, test reports – in accordance with company practices and policies. On occasion, travels to domestic and foreign manufacturing facilities and customer sites to provide technical support for existing products and new product builds. The successful individual must possess excellent communications skills and be well organized, detail oriented, and self-directed.

Objectives:

  1. Create and perform automated testing of electronic products and software for function validation, performance characterization, and failure mode identification.
  2. Design test circuits and fixtures and write LabVIEW programs as needed to automate testing.
  3. Troubleshoot electronic circuits, systems, and test fixtures.
  4. Create and maintain documentation of product material lists, parts drawings, and other project data.
  5. Mentor/train less experienced technicians.

Requirements:

Education: 2-year Associate Degree in Electronic Technology or Avionics or equivalent military training.
Related Experience: 7+ years minimum as a Technician.

Soft Skills: Time management, self-starter, ability to multi-task, excellent verbal/written communication

Special Skills: Advanced soldering/de-soldering at the component level, advanced computer skills, some programming proficiency (LabVIEW preferred), Windows/Linux Command Line/Terminal familiarity, use of electronic test equipment including Oscilloscope/Spectrum Analyzer, VNA, following test procedures, and test automation.  RF background a plus.

Location:  Duluth, GA

#HP1

Apply