1

Gps Mapping Jobs in Nebraska (NOW HIRING)

Driver - Mixer Truck - Grand Island, NE

Grand Island, NE · On-site

$16.75 - $21.25/hr

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Driver - Mixer Truck - Hartington, NE

Hartington, NE · On-site

$18.50 - $23.50/hr

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Driver - Mixer Truck - Norfolk, NE

Norfolk, NE · On-site

$20 - $25.25/hr

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Driver - Mixer Truck - West Point, NE

West Point, NE · On-site

$18.75 - $23.75/hr

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Driver - Mixer Truck - Omaha, NE

Omaha, NE · On-site

$19.25 - $24.75/hr

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Driver - Mixer Truck - Gretna, NE

Gretna, NE · On-site

$18.75 - $24/hr

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Driver - Mixer Truck - Grand Island, NE

Grand Island, NE · On-site

$20.25 - $25.75/hr

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Driver - Mixer Truck - Omaha, NE

Omaha, NE · On-site

$19.25 - $24.50/hr

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Driver - Mixer Truck - Gretna, NE

Gretna, NE · On-site

$18.75 - $24/hr

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Driver - Mixer Truck - Gretna, NE

Gretna, NE · On-site

$18.75 - $24/hr

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Driver - Mixer Truck - Seward, NE

Seward, NE · On-site

$18.75 - $23.75/hr

Ability to read Plant site maps, city street maps and other GPS based equipment information. * Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer ...

Operate GPS and Leica survey equipment. * Prepare survey deliverables and support mapping activities using Civil 3D and Survey CAD. * Work closely with project teams to ensure accurate site layout ...

Showing results 21-40

Gps Mapping information

What is the difference between Gps Mapping vs GIS Technician?

AspectGps MappingGIS Technician
Required CredentialsGPS certification, surveying experienceGIS certification, cartography skills
Work EnvironmentFieldwork, outdoor data collectionOffice-based, data analysis
Industry UsageTransportation, infrastructure, utilitiesUrban planning, environmental management
Common Search IntentField data collection methodsGIS data management and analysis

Gps Mapping primarily involves collecting geographic data in the field using GPS devices, focusing on accurate location data collection. GIS Technicians analyze, manage, and visualize geographic information within GIS software. While both roles work with spatial data, Gps Mapping emphasizes fieldwork and data collection, whereas GIS Technicians focus on data processing and mapping in an office setting.

Is GPS mapping a good career?

GPS mapping is a specialized field involving the creation and updating of digital maps using geographic information systems (GIS) and GPS technology. It offers opportunities in industries such as transportation, logistics, and urban planning, often requiring technical skills and certifications. The career can be stable and growing as demand for accurate digital maps increases with technological advancements.

What are popular job titles related to Gps Mapping jobs in Nebraska?

For Gps Mapping jobs in Nebraska, the most frequently searched job titles are:

Infographic showing various Gps Mapping job openings in Nebraska as of August 2026, with employment types broken down into 80% Full Time, and 20% Part Time. Highlights an 100% In-person job distribution.

Driver - Mixer Truck - South Sioux City, NE

CRH

South Sioux City, NE • On-site

$20 - $25.50/hr

Full-time

Medical, Dental, Retirement

Re-posted 14 days ago


Job description

Job ID:  526781

 Siouxland Concrete Company, A CRH Company, is based in South Sioux City, Neb., and delivers ready mix concrete and related construction materials throughout the Siouxland region.

Position Overview

The Ready-Mix Driver will be responsible for all duties of the position, including the transporting of freshly mixed concrete from the plant to the job site in a safe manner. This individual will be responsible for making normal operating adjustments to the equipment and material being hauled.

Key Responsibilities (Essential Duties and Functions)

  • Comply with all Department of Transportation requirements including but not limited to licensing, vehicle inspection, and hours of service.
  • Operates truck in safe and professional manner on public highways, roads, in the yard area and at various job sites to deliver materials. 
  • Inspects the truck as required at the start of each workday, completing the Driver Check-off Sheet which indicates that all systems are functioning properly.
  • Maneuvers the truck to deliver concrete to the point of delivery. Back truck under batching plant or hopper to receive concrete.
  • Climbs the ladder, approximately 10-12 feet, on the mixer truck to view the load of concrete for consistency and amount, to inspect the drum for cleanliness.
  • Adjusts the trailer axle pressure depending on the weight of the load.
  • Follows written and verbal instructions to include city street maps, directions and can complete necessary paperwork.
  • Assembles concrete chute(s) weighing 30-50 pounds each.
  • Moves hand and foot controls and understands and follows hand signals while operating the truck.
  • Keep truck in clean working order, including basic maintenance. Including spraying and cleaning after loads and prevent concrete build up in mixer.
  • Must meet all eligibility requirements for driving a commercial motor vehicle in interstate commerce as defined by the Federal Motor Carrier Safety Regulations and the Department of Transportation.
  • Perform other duties as assigned.

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disability to perform the essential functions.

Education/Experience

  • High school diploma or general education degree (GED) required.
  • Experience in ready mixed trucks or other related industry experience preferred.

Work Requirements

  • Must be 18 years in age or older.
  • Must pass pre-employment drug screen and criminal background check.
  • Must possess and maintain a Class A or Class B Commercial Driver’s License (CDL).
  • Must possess and maintain a valid Medical Card as per DOT requirements.
  • Report to the plant dressed appropriately and ready to begin work at the designated start time.
  • Strict adherence to safety requirements and procedures as outlined in the Employee Handbook.
  • Willingness to work independently within a team environment and assist the team with other duties as required.
  • Regular and consistent attendance is required and must be willing to work nights, weekends and holidays when necessary.

Knowledge/Skill Requirements

  • Ability to read and comprehend simple instructions, short correspondence, and memos.
  • Ability to cope well in stressful environments and communicate professionally.
  • Demonstrate a hands-on, collaborative approach; work well in a team and independently. 
  • Ability to read Plant site maps, city street maps and other GPS based equipment information.
  • Demonstrated mechanical aptitude and basic math skills required. Ability to read and interpret mixer truck gauges.
  • Able to utilize a tablet for load status, time keeping, training and other items
  • Demonstrated ability to take guidance and direction from a supervisor.

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

  • Able to communicate with others by email, telephone and in person.
  • Regularly able to sit and use hands to finger, handle, or feel.
  • Able to frequently lift and/or move up to 25 pounds, regularly lift and/or move up to 50 pounds.
  • Able to frequently stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and talk or hear.
  • Ability to make precisely coordinated movements of the fingers of one or both hands to grasp or manipulate switches and controls.
  • Ability to climb stairs, ladders, inclined walkways and access elevated platforms.

Work Environment

While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts and outside weather conditions. The employee is frequently exposed to fumes or airborne particles, typical seasonal cold and heat temperatures. The employee is exposed to vibration. The noise level in the work environment is usually moderate.

The statements included in this job description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Other duties may be assigned as required.  Requirements for this job are subject to modification by the Company and its designees, and reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

What CRH Offers You

  • Highly competitive base pay
  • Comprehensive medical, dental and disability benefits programs
  • Group retirement savings program
  • Health and wellness programs
  • An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Siouxland Concrete Company, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

 CRH is an equal opportunity employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

AI tools may be used in certain stages of the employment lifecycle, such as candidate review; however, all final employment decisions will be made by a person.


CRH logo

About CRH

Sourced by ZipRecruiter

CRH has a long and proud heritage as one of North America's largest corporations. We are a proud reflection of the hundreds of family businesses, local and regional companies and mid to large sized enterprises that together form the CRH family. CRH operates with a decentralized, diversified structure, letting you work in a small company environment while having the career opportunities of a large enterprise.

Industry

Construction materials wholesalers

Company size

10,000+ Employees

Headquarters location

New York, NY, US