ZipRecruiter

Log In

2

Full Time Solid State Battery Jobs (NOW HIRING)

Blue Current

Staff Cell Assembly Engineer

Hayward, CA · On-site

Owns cell assembly processes for Blue Current's solid-state battery platform in all facets, from new process development, to scaleup, and through quality system implementation * Collaborates closely ...

Solid Power

Quality Control Technician

Thornton, CO · On-site

$26 - $33/hr

This role will work in a laboratory environment, with the primary responsibility being the efficient and accurate chemical, physical and mechanical analysis of solid-state battery electrolytes. Job ...

Adden Energy

Mechanical Engineer

Waltham, MA · On-site

Design, modify, and optimize the mechanical fixtures for solid-state battery * Design and develop pilot scale electrode coating tools based on the company's cell technology * Design the tools and ...

Solid Power

Quality Control Technician

Thornton, CO · On-site

$26 - $33/hr

This role will work in a laboratory environment, with the primary responsibility being the efficient and accurate chemical, physical and mechanical analysis of solid-state battery electrolytes. Job ...

Blue Current

Senior Scientist

Hayward, CA · On-site

$104K - $143K/yr

Continuously survey and interpret literature on solid-state battery materials and architectures, integrating key insights into the company's technical strategies * Drive innovation and IP development ...

Eurofins

Senior Solid State NMR Scientist

Groton, CT · On-site

$91K - $124K/yr

The Senior Solid State NMR Scientist provides laboratory support in solid-state NMR (ssNMR) data ... Position is full-time, working Monday-Friday 8:00 a.m.-5:00p.m overtime as needed * Candidates ...

Blue Current

Senior Scientist

Hayward, CA

$104K - $143K/yr

Continuously survey and interpret literature on solid-state battery materials and architectures, integrating key insights into the company's technical strategies * Drive innovation and IP development ...

Blue Current

Technician

Hayward, CA · On-site

To learn more about Blue Current, Inc., visit Position Summary Blue Current is seeking a hands-on Technician to support daily operations in its solid-state battery R&D and prototyping labs. The ideal ...

previous pagenext page

Showing results 21-40

All Jobssolid state battery Jobsfull time JobsFull Time Solid State Battery Jobs

Full Time Solid State Battery information

What is the difference between Full Time Solid State Battery vs Battery Engineer?

AspectFull Time Solid State BatteryBattery Engineer
CredentialsRelevant degrees in materials science, electrochemistry, or chemical engineeringDegrees in electrical, mechanical, or chemical engineering
Work EnvironmentResearch labs, manufacturing facilities, R&D centersDesign, testing, and development in labs or industrial settings
Industry UsageBattery manufacturing, automotive, electronics sectorsEnergy storage, electronics, automotive industries

Full Time Solid State Battery specialists focus on developing and manufacturing solid state battery technology, requiring expertise in materials and electrochemistry. Battery Engineers design, test, and improve battery systems across various industries. While both roles involve batteries, Solid State Battery professionals specialize in cutting-edge solid electrolyte technologies, whereas Battery Engineers work on a broader range of battery types and applications.

What are the most commonly searched types of Solid State Battery jobs?

The most popular types of Solid State Battery jobs are:

What job categories do people searching Full Time Solid State Battery jobs look for?

The top searched job categories for Full Time Solid State Battery jobs are:

Full Time Solid State Battery jobs near you
Infographic showing various Full Time Solid State Battery job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 70% Full Time, 26% Part Time, and 3% Contract. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution.

Battery/ Pack Systems Engineer

QuantumScape Corporation

San Jose, CA • On-site

$136K - $208K/yr

Full-time

Posted 29 days ago

Key responsibilities

  • Design the cell-to-pack mechanical assembly, including cell stacking, compression systems, interconnects, and structural integration within the shared PSU+ BBU enclosure

  • Architect the BMS hardware topology, specify protection FET sizing, sense line routing, and communication interfaces

  • Conduct pack-level FMEA and safety analysis, define and execute abuse test protocols, and support safety certification activities

Job description

QuantumScape is on a mission to transform energy storage with solid-state lithium-metal battery technology. The company's next-generation batteries are designed to enable greater energy density, faster charging and enhanced safety to support the transition away from legacy energy sources toward a lower carbon future.
About the role: As Battery / Pack Systems Engineer, you own everything from cell to pack - mechanical integration, BMS architecture, thermal management of the battery section, charge/discharge optimization, safety engineering, and cycle life validation. You are the critical bridge between our cell technology and the power platform, translating evolving cell-level specs into robust pack-level designs in near real-time.
Why this role matters: You sit at the center of the entire team's collaboration web. The power electronics lead needs your voltage window and current limits. The firmware engineer needs your BMS algorithms and
protection logic. The thermal-mechanical engineer needs your cell thermal requirements. And the cell development team needs your pack-level feedback. Most critically, the safety and longevity story of solid-state batteries in data center racks - the core market differentiator - lives or dies in your design choices.
What you'll do:
  • Design the cell-to-pack mechanical assembly: cell stacking, compression systems, interconnects (wire bonding, busbar welding, or flex circuit), and structural integration within the shared PSU+ BBU enclosure
  • Architect the BMS hardware topology (distributed vs. centralized sensing, passive vs. active balancing) and specify protection FET sizing, sense line routing, and communication interfaces
  • Develop and tune state-of-charge and state-of-health estimation algorithms (coulomb counting, extended Kalman filter, impedance-based methods) tailored to solid-state cell electrochemistry
  • Co -develop charge/discharge profiles with the firmware engineer - CC-CV curves, temperature-dependent rate limits, fast-charge protocols, and float/maintenance charge strategies optimized for data center duty cycles
  • Design the thermal interface between cells and enclosure (thermal pads, gap fillers, heat spreaders, dedicated thermal paths) in collaboration with the thermal-mechanical engineer
  • Conduct pack-level FMEA and safety analysis; define and execute abuse test protocols (nail penetration, crush, overcharge, external short circuit) adapted for solid-state cell behavior
  • Design accelerated aging test protocols for the data center-specific duty cycle: prolonged high-Soc float hold with infrequent high-power discharge events
  • Serve as the primary liaison to the cell development team, translating pack-level requirements into cell-level specs and feeding test/field data back to improve cell design
  • Support UL 1973 and UL 9540A safety certification activities

What you bring:
  • 8+ years in battery pack/module design with at least one product through prototype validation or production
  • Hands-on BMS hardware architecture experience (you don't need to lay out the PCB, but you specify the topology and component selection)
  • Cell characterization and modeling skills (impedance spectroscopy, capacity fade analysis, thermal characterization)
  • Experience with battery safety standards, specifically UL 1973; UL 9540A exposure strongly preferred
  • Proficiency with pack-level thermal modeling and mechanical design (SolidWorks, Creo, or equivalent; thermal simulation a plus)
  • Comfortable working with evolving cell specs and making design decisions under incomplete data

Nice to have:
  • Prior exposure to solid-state, lithium-metal, or other next-generation cell chemistries (even at the research level)
  • Experience with data center, telecom, or stationary storage backup battery systems (understands float-then-discharge duty cycles vs. EV cycling)
  • Familiarity with electrochemical modeling tools (COMSOL, PyBaMM, AutoLion, or equivalent)
  • Experience with IEC 62619 industrial battery safety standard
  • Background in applications engineering at a cell manufacturer (translating cell data into customer pack designs)
  • Knowledge of functional safety principles (IEC 61508 or equivalent)

ONSITE: This position is required to work onsite 5 days per week to meet the minimum essential duties and requirements of this position. As an on-site R&D and manufacturing operations organization, in-person face to face interaction is essential to building authentic relationships, trust, teamwork, and collaboration.
Compensation & Benefits: Expected salary range for this role is from $136,700 to $208,500, and a final salary will be determined by the candidate's experience, educational background and internal equity. QuantumScape also offers an annual bonus and a generous RSU/Equity package as part of its compensation plan. In addition, we do offer a tremendous benefits plan including employee paid health care, Employee Stock Purchase Plan (ESPP), and other benefits.
We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive benefits and privileges of employment. Please contact us to request an accommodation.

Apply