ZipRecruiter

Log In

2

Full Time Pcb Testing Jobs in California (NOW HIRING)

Matter Intelligence

Electrical Engineer

El Segundo, CA · On-site

This role is ideal for an engineer with strong PCB design fundamentals and hands-on experience ... Support acceptance testing and verification of assemblies and subsystems. Standards, Documentation ...

Monarch Quantum

Electronics Technician 4

San Diego, CA · On-site

$40 - $58/hr

Experience assembling, testing, and troubleshooting RF and mixed‑signal circuits in the 200 MHz ... Experience with PCB rework, including fine‑pitch soldering, component replacement, and hardware ...

Monarch Quantum

Electronics Technician 4

San Diego, CA · On-site

$40 - $58/hr

Experience assembling, testing, and troubleshooting RF and mixed-signal circuits in the 200 MHz to ... Experience with PCB rework, including fine-pitch soldering, component replacement, and hardware ...

Monarch Quantum

Electronics Technician 4

San Diego, CA · On-site

$40 - $58/hr

Experience assembling, testing, and troubleshooting RF and mixedsignal circuits in the 200 MHz to ... Experience with PCB rework, including finepitch soldering, component replacement, and hardware ...

Onsite Personnel LLC

Quality Inspector-II

Moorpark, CA

$25 - $30/hr

Onsite Personnel Job Type: Full-Time | Temp-to-Hire (TTH) Pay: $25.00 - $30.00 per hour Schedule ... The ideal candidate will have experience inspecting printed circuit board (PCB) assemblies, a ...

GITAI

Electrical Engineer

Los Angeles, CA · On-site

Support integration, environmental testing, field testing, and failure investigations by ... hands-on PCB design experience using Altium or a similar ECAD tool. * 1+ year of full-time ...

Astrolab

Lead Avionics Electrical Engineer

Hawthorne, CA · On-site

$183K - $230K/yr

Avionics Employment Type: Full Time Location: Hawthorne, California Reporting To: Jake Peery ... PCB layout, and testing. This position will report to the Director of Avionics Engineering and will ...

Sierra Circuits inc.

AOI Programmer 3

San Jose, CA · On-site

Set-up and operate the testing machine/Vitrox V510 to perform electrical testing on PCB to ensure ... California Hourly Pay Range: $22-$27/ Hour What We Offer * Full - Time, non-exempt position

Astrolab

Staff Avionics Electrical Engineer

Hawthorne, CA · On-site

$203K - $243K/yr

Avionics Employment Type: Full Time Location: Hawthorne, California Reporting To: Jake Peery ... capture, PCB layout, analysis, and testing * Design proficiency with voltage regulators, FPGAs ...

previous pagenext page

Showing results 21-40

All JobsPcb Testing JobsFull Time Pcb Testing JobsFull Time Pcb Testing Jobs in California

Full Time Pcb Testing information

What is full time PCB testing?

Full Time PCB Testing jobs involve working as a technician or engineer to ensure that printed circuit boards (PCBs) function correctly and meet quality standards. Employees in these roles perform a variety of tests, including visual inspection, functional testing, and troubleshooting of electronic circuits. These positions typically require knowledge of electronic components, proficiency with testing equipment, and the ability to read technical schematics. Full time roles usually offer standard work hours, benefits, and opportunities for career advancement in electronics manufacturing or quality assurance. People in these jobs play a critical part in maintaining product reliability and safety.

What are the key skills and qualifications needed to thrive as a full time PCB testing technician?

To thrive as a Full Time PCB Testing Technician, you need strong knowledge of electronics, circuit analysis, and troubleshooting, typically supported by a technical diploma or degree in electronics or electrical engineering. Familiarity with testing equipment such as oscilloscopes, multimeters, automated test systems, and relevant industry certifications (like IPC-A-610) is often required. Attention to detail, problem-solving skills, and effective communication are essential soft skills for this role. These abilities ensure accurate diagnosis, efficient repairs, and high-quality standards in PCB manufacturing and testing environments.

What are some common challenges faced in a full-time PCB testing role, and how can they be overcome?

A full-time PCB testing role often involves troubleshooting intricate circuit boards, identifying intermittent faults, and ensuring strict adherence to quality standards. One common challenge is diagnosing subtle issues that may not be immediately visible, such as cold solder joints or micro-cracks, which require a keen eye and methodical testing procedures. Collaboration with design and manufacturing teams is crucial for resolving recurring problems and streamlining the testing process. Staying updated on the latest testing equipment and best practices can also help overcome technical challenges and improve overall efficiency.

What is the difference between Full Time Pcb Testing vs Pcb Assembly Technician?

AspectFull Time Pcb TestingPcb Assembly Technician
CertificationsElectronics testing certifications, IPC-A-610Electronics assembly certifications, IPC-A-610
Work EnvironmentTesting labs, quality control departmentsManufacturing floors, assembly lines
Job FocusInspecting and testing printed circuit boards for defectsAssembling and soldering components onto PCBs
Industry UsageElectronics manufacturing, quality assuranceElectronics manufacturing, production lines

Full Time Pcb Testing primarily involves inspecting and testing PCBs to ensure quality and functionality, often in testing labs. Pcb Assembly Technicians focus on assembling and soldering components onto PCBs during manufacturing. While both roles require knowledge of electronics and certifications like IPC-A-610, their work environments and job responsibilities differ significantly.

What are the most commonly searched types of Pcb Testing jobs in California?

The most popular types of Pcb Testing jobs in California are:

What cities in California are hiring for Full Time Pcb Testing jobs?

Cities in California with the most Full Time Pcb Testing job openings:

Full Time Pcb Testing jobs near you

Quality Engineering Technician (PCB Manufacturing)

AdvancedPCB

Orange, CA • On-site

$25 - $35/hr

Full-time

Medical, Dental, Vision, Retirement

Re-posted 7 days ago

Job description

Job Type
Full-time
Description
Scope:
Support Quality Management System and Manufacturing Process Continuous Improvement.
Essential Job Function:
  • Generating Quality Reports.
  • KPI charts/data
  • Organize MRB Meetings
  • Participate in investigations for quality issues, RMA's, process issues, etc.
  • Customer interface.
  • Root Cause Corrective Action. Issue/verify effectiveness of Corrective/Preventive Action.
  • Maintain quality system document and data control (procedures, work instructions, and forms).
  • Maintain training system-database
  • o Issue training records
  • o Update database when complete.
  • Perform Internal Audits/follow ups.
  • Assist customer source inspection
  • o Requested/performed/logged in & out.
  • Customer complaints assist QC with/update paperwork issues.
  • Maintain calibration system-database
  • o Schedule
  • o New equipment
  • o Maintain certifications.
  • Perform XRF validations bi-annual for all programs in system, fix minor items & coordinate service.
  • Weekly Ionic Contamination verification.
  • Assist all when forms/documents are needed.
  • Update and post SPC charts for TS&E.
  • Collect, download, and send out temperature/humidity weekly.
  • Locate missing traveler/history packages
  • Assist in maintaining Commercial, Customer, and Military Qualifications.
  • Participate and assist in Manufacturing Operations as required to support company goals.
  • o This may include rework, inspection, or similar activities.
  • Issue inspection stamps.
  • Maintain supply and issue tape for tape testing.
  • Maintain supply of Gold & Nickel rework pens (log issuance).
  • Prepare AS 9102 forms for Final Inspection as needed
  • Double check certification packages/AS9102 FAIRs for customer qualification orders or any other deemed necessary by a manager.
  • Travelers:
  • o Place all documents in order
  • o Ensure all sign offs
  • o Log where they go (OC or Scan)
  • o Verify lab log completed correctly.
  • RMA's:
  • o Issue, receive, close/
  • o Credit-Credit rebill memos
  • o Log-database
  • Maintain Customer, Military, IPC, and Industry specifications.
  • Send/track/log all Military (monthly) and Commercial (as required) test coupons and mounts to outside services
  • o Maintain log out & in.

Work Schedule:
This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends when schedule details are provided in advance.
Work schedule is 1st Shift Monday through Friday, 6:00 am - 2:30 pm.
Requirements
Essential Qualifications, Education and Experience:
  • Bachelor's degree in any engineering capacity.
  • 3-5 years of experience in the PCB manufacturing industry, with a focus in the Quality function
  • IPC Certification

Preferred Skills:
  • Knowledge of AS9100 Quality Management System
  • Proficient in reading, writing, and speaking English
  • Excellent Organizational skills
  • Proficient at reading blueprints, military, commercial, and customer specifications
  • Advanced computer skills utilizing various software programs including Microsoft Office.
  • Excellent written and verbal communication skills
  • Advanced ability to follow written and verbal instructions

Physical Requirements:
  • Sitting at a desk working on a computer for extended periods of time
  • Walking on uneven surfaces
  • Bending at the head and neck
  • Bending at the waist
  • Lift up to 50 lbs.

Compensation:
California Pay Range: $25.00 - $35.00 per hour USD DOE
The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations.
About AdvancedPCB
AdvancedPCB, with over 40 years of experience, is a leading manufacturer of high-reliability printed circuit boards. The company features six manufacturing sites: Aurora, Colorado, our headquarters, Santa Clara, two in Southern California, Maple Grove, Minnesota, and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making APCT one of the largest privately held printed circuit board manufacturers in North America.
Advanced PCB offers Medical, Dental, Vision Insurance as well as 401K.
ITAR Compliance Requirement:
This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position.
AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC).
Visit us!
https://www.advancedpcb.com/en-us/
Salary Description
$25.00 - $35.00 per hour DOE

Apply