ZipRecruiter

Log In

2

Full Time Cnc Router Programmer Jobs in Rochester, NY

PGM Corporation

CMM Operator II

Rochester, NY · On-site

$24 - $29/hr

Job Type Full-time Description This is a B-Shift Position with hours 3:00 PM to 11:00 PM+ Hours are ... Work with other CNC personnel in debugging and developing new production processes. * Utilizes a ...

Addman Engineering

Manufacturing Manager

Ontario, NY · On-site

$90K - $110K/yr

Job Type Full-time Description POSITION SUMMARY: The Machining Manufacturing Manager will lead day ... CNC programmers, machinist, operators • Develop and execute strategic plans for process ...

Corning

Optical Fabrication Engineer

Fairport, NY

$84K - $116K/yr

Experience working with CNC equipment and 3D modeling software * Strong communication and ... The range for this position is $84,932.00 - $116,782.00 assuming full time status. Starting pay for ...

Corning

Optical Fabrication Engineer

Fairport, NY · On-site

$84K - $116K/yr

Experience working with CNC equipment and 3D modeling software * Strong communication and ... The range for this position is $84,932.00 - $116,782.00 assuming full time status. Starting pay for ...

RES Exhibit Services LLC

Exhibit Detailer

Rochester, NY · On-site

$28 - $35/hr

Maximize the return on RES's investment in design engineering and CNC technology. * Operate and ... S. base salary range for this full-time position is $28.00 to $35.00 per hour, with opportunity for ...

Corning

Precision Optics Development Engineer

Fairport, NY · On-site

$119K - $164K/yr

Proficiency with CNC platforms such as grinders, polishers, MRF, IBF, or sub-aperture polishers on ... The range for this position is $119,542.00 - $164,370.00 assuming full time status. Starting pay ...

Addman Engineering

Mold Maker

Ontario, NY · On-site

$35 - $45/hr

Job Type Full-time Description POSITION SUMMARY: Mold Maker helps to support manufacturing of ... Sets up and operates machines (i.e., CNC Mills, Surface Grinders, and EDM's). * Assembles and ...

Datrose, Inc

Press Brake Operator

Webster, NY

$22 - $30/hr

Duration: Full-time (Temp to Perm) Hours: Shifts may include days, evenings, or weekends depending ... Working knowledge of CNC press brake programming (Amada, Cincinnati, Accurpress, or similar ...

Enpro

One - Up Operator 6am-230pm

Palmyra, NY · On-site

$24.72/hr

Job Type: Full Time ESSENTIAL FUNCTIONS: * Operates a series of electric/hydraulic presses in ... Informs Supervisor and/or Engineering of defective conditions concerning pre-molded blanks. Assists ...

Enpro Industries

One - Up Operator 6am-230pm

Palmyra, NY · On-site

$24.72/hr

Job Type: Full Time ESSENTIAL FUNCTIONS: * Operates a series of electric/hydraulic presses in ... Informs Supervisor and/or Engineering of defective conditions concerning pre-molded blanks. Assists ...

next page

Showing results 1-20

All JobsCnc Router Programmer JobsFull Time Cnc Router Programmer JobsFull Time Cnc Router Programmer Jobs in Rochester, NY

Full Time Cnc Router Programmer information

See Rochester, NY salary details

$16

$30

$44

How much do full time cnc router programmer jobs pay per hour?

As of Jul 14, 2026, the average hourly pay for full time cnc router programmer in Rochester, NY is $30.54, according to ZipRecruiter salary data. Most workers in this role earn between $25.14 and $34.38 per hour, depending on experience, location, and employer.

What is the difference between Full Time Cnc Router Programmer vs Cnc Machine Operator?

AspectFull Time Cnc Router ProgrammerCnc Machine Operator
CredentialsBasic technical skills, sometimes certifications in CNC programmingBasic machine operation knowledge, safety training
Work EnvironmentDesigning, programming, and setting up CNC routers in manufacturing or woodworking shopsOperating CNC machines, monitoring production, and ensuring quality
Employer & IndustryManufacturing, woodworking, signage, and custom fabrication industriesManufacturing, metalworking, and fabrication industries

While both roles involve working with CNC machines, the Full Time Cnc Router Programmer primarily focuses on creating and optimizing CNC programs, whereas the Cnc Machine Operator handles the day-to-day operation and monitoring of CNC machines. The programmer's role is more technical and design-oriented, often requiring programming skills, while the operator's role emphasizes machine operation and quality control.

What cities near Rochester, NY are hiring for Full Time Cnc Router Programmer jobs? Cities near Rochester, NY with the most Full Time Cnc Router Programmer job openings:
Full Time Cnc Router Programmer jobs near you
Infographic showing various Full Time Cnc Router Programmer job openings in Rochester, NY as of July 2026, with employment types broken down into 100% Full Time. Highlights an 94% In-person, and 6% Hybrid job distribution, with an average salary of $63,531 per year, or $30.5 per hour.

CMM Operator II

PGM Corporation

Rochester, NY • On-site

$24 - $29/hr

Full-time

Posted 4 days ago

Job description

Job Type
Full-time
Description
This is a B-Shift Position with hours 3:00 PM to 11:00 PM+
Hours are negotiable for the right candidate, overtime often available
Summary
Sets-up and operates CMM machine on complex short and long run jobs to produce precision machined parts to acceptable levels of efficiency and quality. This position helps operators and S/U operators with new processes and programs.
Essential Duties and Responsibilities
  • Setup CMM machine using proper procedures and equipment to establish and ensure consistent and efficient operation, optimum perishable tooling usage, and acceptable quality levels.
  • Operate CMM machine, running new and existing jobs per established processes.
  • Work with other CNC personnel in debugging and developing new production processes.
  • Utilizes a full range of precision tools and special purpose instrumentation such as dial indicators, optical comparators, and coordinate measuring machines to measure dimensions where tolerances are often exacting and parts are intricate in nature. Performs complex calculations to determine angles, tolerances, dimensions and other specified measurements.
  • Devices alternate methods of holding and setting up work for inspection where existing procedures and tools cannot be applied. Apply creative abilities to develop new inspection techniques that are efficient and cost effective.
  • Help to provide CMM operational training/instructions and preventive maintenance as needed to machinists and CNC set-up operators and machine operators.
  • Establish and perform required inspection duties to maintain acceptable quality levels.
  • Works closely with machinists to determine complex set up procedures or performs special evaluations as requested.
  • Works closely with engineering regarding technical issues (i.e. tooling, defining inspection methods, field return analysis, etc) and problem resolution.
  • Record Statistical Process Control data as required.
  • Follow company policies as outlined in the employee handbook.
  • Complete job-related paperwork accurately and completely.
  • Understand basic Vantage system for time reporting purposes.
  • Understand how to use elementary statistical tools for problem identification and analysis.
  • Assist other department operators when required or directed.
  • Other duties may be assigned.

Job Specifications
This job requires knowledge of CNC machine operations. Job also requires knowledge with use of production gauging, open plate measurement, statistical process control, and blueprint reading/geometrical tolerancing. The incumbent must also process good interpersonal skills to work both with fellow employees and customers, good working knowledge of tooling concepts, machining practices, and troubleshooting/debugging processes.
Education, Training and/or Experience
Two to four years related experience and/or training or equivalent combination of education and experience. On-the-job training is provided in accordance with PR-18 and the training matrix defined therein.
Language Skills
Ability to read and interpret documents such as safety rules, operating, maintenance instructions, and procedure manuals.
Mathematical Skills
Ability to add, subtract two-digit numbers and multiply and divide with 10's and 100's. Must demonstrate proficiency in trigonometry and geometry. Ability to perform these operations using units of American, metric and weight measurement, volume and distance.
Reasoning Ability
Ability to apply common sense understanding to carry out instructions furnished in written, verbal or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
Physical Demands
While performing the duties of this job, the employee is regularly required to stand; walk; use hands or fingers, handle, or feel; reach with hands and arms. The employee frequently is required to sit. The employee must regularly lift and/or move up to 15 pounds, occasionally lift and/or move up to 25 pounds, and occasionally lift and/or move up to 40 pounds. Specific visual abilities required for this job include close vision, peripheral vision, depth perception and an ability to monitor product visually.
Work Environment
While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is minimally exposed to fumes or airborne particles, toxic or caustic chemicals, minimal exposure to extreme heat and vibrating machinery. The noise level in the work environment is usually moderate.
Quality System Documents Applicable to Position
PGM is a process-driven company that is totally committed to customer satisfaction, evident by performance through the prevention of non-conformances at all stages of our relationship with purchasers of our products.
Accordingly, all employees are empowered to identify problems with system, process or product quality and whenever possible, prevent discrepancies and suggest continuous improvement opportunities.
PGM's mission, vision and value statements are published in the Quality Management System (QMS) Policy Manual and posted throughout the building. The PGM QMS manual details the responsibilities that all employees share in the overall documented quality system.
This is a B-Shift Position with hours 3:00 PM to 11:00 PM+
Hours are negotiable for the right candidate, overtime often available
Salary Description
$24 to $29 per hour

Apply