ZipRecruiter

Log In

2

Full Time Cnc Government Jobs (NOW HIRING)

WinTec Arrowmaker, Inc

CNC Machinist

Tampa, FL · On-site

$32 - $37/hr

... Government Agencies, and Commercial Partners. The CNC Machinist will work under the direction of ... Hourly, Full Time Position, Located in Tampa, FL * MUST FILL OUT THE ENTIRE QUESTIONNAIRE TO BE ...

CACI International, Inc.

CNC Machinist

Danbury, CT · On-site

$82K/yr

  • Medical

  • Retirement

  • PTO

CNC Machinist Job Category: Engineering and Technical Support Time Type: Full time Minimum ... S. Government Security Clearance EHS/Environmental Requirements: While performing the duties of ...

WinTec Arrowmaker, Inc

CNC Machinist

Tampa, FL · On-site

$32 - $37/hr

... Government Agencies, and Commercial Partners. The CNC Machinist will work under the direction of ... Hourly, Full Time Position, Located in Tampa, FL * MUST FILL OUT THE ENTIRE QUESTIONNAIRE TO BE ...

Eagle Technologies LLC

CNC Machine Operator

Newport News, VA · On-site

$18 - $25/hr

  • Medical

  • Dental

  • Vision

  • Retirement

... Full time Benefits: Medical, Dental & Vision, 401K with matching, paid holidays and time off ... Will work on government contracts. HS Degree or equivalent required. Must be a US Citizen. Eagle ...

Impulse Space

CNC Programmer

Redondo Beach, CA · On-site

$45 - $60/hr

  • Medical

  • Dental

  • Vision

  • Retirement

Manufacturing Employment Type: Full Time Location: Redondo Beach Compensation: $45.00 - $60.00 ... Government space technology export regulations, including the International Traffic in Arms ...

Expert Staffing West

CNC Lathe Machinist

Poway, CA · On-site

$23 - $40/hr

Poway, CA Job Type: Full-time (40 hours/week), Non-exempt (hourly), In-Person Hours: 7:00 AM - 3:30 ... government security regulations. These laws do not permit access rights to non-US citizens, or to ...

Regal Rexnord

CNC Operator

Michigan City, IN

$20 - $27.25/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Job Type: Full-time Experience: * CNC: 1 year (Required) * Precision measuring instruments: 1 year ... manuals and government regulations. Ability to write routine reports, operating instructions ...

Eagle Technologies LLC

CNC Machine Operator

Newport News, VA · On-site

$18 - $25/hr

  • Medical

  • Dental

  • Vision

  • Retirement

... Full time Benefits: Medical, Dental & Vision, 401K with matching, paid holidays and time off ... government contracts. • HS Degree or equivalent required. • Must be a US Citizen. Eagle ...

W3Global Inc.

Manual and CNC Machinist

Elm Mott, TX

$21 - $25/hr

... : Full-time Experience: * CNC: 2 years (Preferred) Ability to Commute: * Elm Mott, TX 76640 ... government and more. We're proud of the investments we've made in our team, having grown from four ...

Cygnus, Inc.

Swing shift CNC Machinist

Ponderay, ID · On-site

$19.50 - $26.50/hr

  • Medical

  • Dental

  • Vision

  • Retirement

This is a full-time position. Nights - 9/80 schedule - * 1st week: 2:00pm - 11:30pm. Mon - Thu and ... Cygnus, Inc participates in E-verify and will provide the federal government with your Form I-9 ...

RTCA

CNC Programmer - 5 Axis CNC Mill

Sumner, WA · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

We support mission-critical commercial and government aerospace programs across North America ... Working a full-time, onsite position at our Sumner, WA location. * Develop machine processes and ...

W3Global Inc.

Senior CNC Machinist

Sanford, FL

$34 - $40/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Sanford, FL Job Type: Full-Time Work Location: In Person Position Overview We are seeking an ... government and more. We're proud of the investments we've made in our team, having grown from four ...

New

RTCA

CNC Programmer - 5 Axis CNC Mill

Sumner, WA · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

We support mission-critical commercial and government aerospace programs across North America ... Working a full-time, onsite position at our Sumner, WA location. * Develop machine processes and ...

Seneca Resources Company, LLC

CNC Machinist I

Calera, AL · On-site

$81K/yr

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Calera, AL, USA Pay: $80,000 Position Status: Full-Time | Contract to Hire Position Description: We ... S. and clients ranging from Fortune 500 companies to government organizations, we connect ...

RTCA

CNC Programmer - Multi Axis CNC Lathe

Sumner, WA · On-site

$40 - $45/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

We support mission-critical commercial and government aerospace programs across North America ... Working a full-time, onsite position at our Sumner, WA location. * Develop machine processes and ...

previous pagenext page

Showing results 21-40

All JobsCnc Government JobsFull Time Cnc Government Jobs

Full Time Cnc Government information

See salary details

$14

$23

$33

How much do full time cnc government jobs pay per hour?

As of Aug 16, 2026, the average hourly pay for full time cnc government in the United States is $23.65, according to ZipRecruiter salary data. Most workers in this role earn between $19.71 and $26.92 per hour, depending on experience, location, and employer.

What is the easiest full time CNC government job to get?

A full-time CNC government job typically requires technical skills in machining, familiarity with CNC programming, and relevant certifications such as a trade license or technical diploma. Entry-level positions may be easier to obtain if you have basic CNC operation experience and a security clearance, which is often required for government roles. These jobs often involve standard shifts and structured environments, making them accessible to qualified candidates with the necessary credentials.

What is the difference between Full Time Cnc Government vs Full Time Cnc Private Sector?

AspectFull Time Cnc GovernmentFull Time Cnc Private Sector
CredentialsTypically requires technical certifications and security clearancesRequires technical certifications, but security clearances are less common
Work EnvironmentOften more structured, regulated, and stableVaries widely, may be more dynamic and competitive
Employer & Industry UsageGovernment agencies, defense, public infrastructureManufacturing firms, private contractors, industrial plants
Job Security & BenefitsGenerally higher job security, comprehensive benefitsVariable job security, benefits depend on employer

Full Time Cnc Government roles typically offer more stability, structured work environments, and security clearances, whereas Full Time Cnc Private Sector positions often provide more flexibility, diverse projects, and competitive pay. The choice depends on your career goals and preferences for work environment.

More about Full Time Cnc Government jobs

What cities are hiring for Full Time Cnc Government jobs?

Cities with the most Full Time Cnc Government job openings:

What are the most commonly searched types of Cnc Government jobs?

The most popular types of Cnc Government jobs are:

What states have the most Full Time Cnc Government jobs?

States with the most job openings for Full Time Cnc Government jobs include:

What job categories do people searching Full Time Cnc Government jobs look for?

The top searched job categories for Full Time Cnc Government jobs are:

Full Time Cnc Government jobs near you
Infographic showing various Full Time Cnc Government job openings in the United States as of August 2026, with employment types broken down into 91% Full Time, 7% Part Time, and 2% Contract. Highlights an 92% Physical, 2% Hybrid, and 6% Remote job distribution, with an average salary of $49,183 per year, or $23.6 per hour.

CNC Machine Operator

Eagle Technologies LLC

Newport News, VA

$18 - $25/hr

Full-time

Medical, Dental, Vision, Retirement

Re-posted 21 days ago

Job description

CNC Machine Operator

Eagle Technologies, LLC (Newport News, VA) is seeking CNC Machine Operators. Eagle Technologies designs and manufactures state of the art aircraft systems and components for the aerospace industry, with a niche in helicopter rotor system and prop blade development. We are AS9100 Rev D certified in all aspects of our operation, working routinely in both composites and aerospace metals. For more information about Eagle Technologies, visit our webpage at www.eagleaviationtech.com

Salary: $18-25/hr

Job Type: Full time

Benefits: Medical, Dental & Vision, 401K with matching, paid holidays and time off

Hiring for all shifts

Position Notes: Potential for promotion to CNC Machinist is possible for highly motivated individuals willing to learn the trade is possible, with demonstrated skills and abilities.

Summary of Duties & Responsibilities:

Follow operating procedures, engineering instructions, and other recognized methods of instructions.

Able to read blueprints or written specifications to calculate operations.

Use Computer Numerically Controlled (CNC) cutting machines and precision measuring tools.

Monitors machine operation, identifies basic issues, and communicates concerns to Machine Supervisor or Engineering

Follows established QC processes and reports defective materials, tooling, or equipment immediately.

Assists machinists and engineers with shop tasks, fixturing, tool organization, and workflow support.

Helps maintain documentation, setup sheets, and work instructions as directed.

Maintains a clean, safe, and orderly work area while complying with all company safety policies and procedures.

Other activities may be directed.

Knowledge, Skills, and Abilities

Team Player

Strong work ethic

Mechanical Aptitude

Ability to work within, and contribute to, a rigid quality control system

Willing to learn

Ability to lift to 50 pounds is required.

Credentials and Experience

Experience working in a mechanical environment.

Will work on government contracts.

HS Degree or equivalent required.

Must be a US Citizen.

Eagle Technologies, LLC offers a full-time position with full benefits, competitive pay and opportunity to grow within a cutting-edge aerospace company.

Eagle Technologies, LLC is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

Employment Type: FULL_TIME

Apply