ZipRecruiter

Log In

1

Form Processor Jobs (NOW HIRING)

Orion Marine Group

Form Setter (Travel)

Houston, TX · On-site

$20.75 - $26/hr

The Form Setter drives wooden and metal stakes with a sledgehammer, and hammers or screws nails and ... Supports drilling process when necessary. * Operates all equipment and tools required to do each ...

Schneider

Form Setter (Travel)

Houston, TX · On-site

$20.75 - $26/hr

The Form Setter drives wooden and metal stakes with a sledgehammer, and hammers or screws nails and ... Supports drilling process when necessary. * Operates all equipment and tools required to do each ...

TAS Concrete

Form Setter Helper Concrete

Lewisville, TX · On-site

$22.25 - $28/hr

The Form Setter drives wooden and metal stakes with a sledgehammer and hammers or screws nails and ... Supports drilling process when necessary. * Operates all equipment and tools required to do each ...

Schneider

Form Setter Helper Concrete

Lewisville, TX · On-site

$22.25 - $28/hr

The Form Setter drives wooden and metal stakes with a sledgehammer and hammers or screws nails and ... Supports drilling process when necessary. * Operates all equipment and tools required to do each ...

Air Industries Company

Be Seen First

Thread/Form Roll Operator

Garden Grove, CA · On-site

$19 - $52.25/hr

Basic familiarity with thread/form roll tooling ... This role requires intermediate competencies in print reading and inspection processes, as well as ...

Orion Marine Group

Form Setter Helper LC

Houston, TX · On-site

$20.75 - $26/hr

The Form Setter drives wooden and metal stakes with a sledgehammer and hammers or screws nails and ... Supports drilling process when necessary. * Operates all equipment and tools required to do each ...

Engineered Products

Roll Form Operator III

Easley, SC · On-site

Roll Form Operator Reports to: Operations Manager Location: Easley, SC The Roll Form Operator is ... Perform in-process quality inspections using tape measures, calipers, gauges, and other measuring ...

Orion Marine Group

Form Setter Helper Concrete

Lewisville, TX · On-site

$22.25 - $28/hr

The Form Setter drives wooden and metal stakes with a sledgehammer and hammers or screws nails and ... Supports drilling process when necessary. * Operates all equipment and tools required to do each ...

Barnes Group

Hot Form Operator - 3rd Shift

Ogden, UT · On-site

Prepares and loads dies into the hot form press according to the router, using die blocks and die ... Locate, read and understand process procedures and instructions. * Understand and utilize MSDS ...

TAS Concrete

Form Setter Helper LC

Houston, TX · On-site

$20.75 - $26/hr

The Form Setter drives wooden and metal stakes with a sledgehammer and hammers or screws nails and ... Supports drilling process when necessary. * Operates all equipment and tools required to do each ...

Form Energy

Process Technician

Weirton, WV · On-site

Form Energy is an American manufacturing and energy technology company. We're revolutionizing ... Role Description Form Energy is hiring a process engineering technician to support our operations ...

Form Energy

Process Technician

Weirton, WV · On-site

Form Energy is an American manufacturing and energy technology company. We're revolutionizing ... Role Description Form Energy is hiring a process engineering technician to support our operations ...

previous page

Showing results 41-60

All JobsForm Processor Jobs

Form Processor information

See salary details

$8

$16

$25

How much do form processor jobs pay per hour?

As of Sep 11, 2026, the average hourly pay for form processor in the United States is $16.74, according to ZipRecruiter salary data. Most workers in this role earn between $13.46 and $19.23 per hour, depending on experience, location, and employer.

What cities are hiring for Form Processor jobs?

Cities with the most Form Processor job openings:

What states have the most Form Processor jobs?

States with the most job openings for Form Processor jobs include:

What are popular job titles related to Form Processor jobs?

For Form Processor jobs, the most frequently searched job titles are:

Infographic showing various Form Processor job openings in the United States as of September 2026, with employment types broken down into 86% Full Time, 9% Part Time, and 5% Contract. Highlights an 100% In-person job distribution, with an average salary of $34,822 per year, or $16.7 per hour.

Form Carpenter w/ wall experience

Social Circle, GA • On-site

Wayne Brothers, Inc.
Construction • 201 - 500 employees
Learn more about Wayne Brothers, Inc.external

$23.25 - $28/hr

Other

Re-posted 21 days ago

Wayne Brothers rating

9.3

Company rating: 9.3 out of 10

Based on 6 frontline employees who took The Breakroom Quiz

Job description

Application Instructions
Please review position description and requirements and begin application online by clicking on the Apply Now above.
Position Description
Wall experience is a must!
ESSENTIAL DUTIES
  • Performs all essential job functions of a Carpenter Technician
  • Builds forms, fixtures, or templates of wood, metal, plastic or other material for use in the production of concrete footings, slabs, walls, columns, piers, ramps, or steps.
  • Determines type and dimensions of concrete forms from oral instructions from lead/master carpenter, carpentry foreman or superintendent.
  • Gathers and organizes materials, equipment and supplies to be used in the form building project.
  • Uses hand and power tools, as well as light equipment, to measure, cut and otherwise form material to specified dimensions.
  • Fastens wood, metal and or plastic/other material to construct the form.
  • Constructs forms for continuous, stepped continuous, pier and grade beam concrete footings.
  • Constructs edge forms for on-grade slabs to plus or minus 1/8-inch tolerance in grade and line.
  • Erects built-in-place forms or tilt-up wall forms on construction sites according to blueprints and layout specifications received from lead carpenter, carpentry foreman or superintendent.
  • Inserts wooden or metal spreaders between opposite faces of form to maintain specified dimensions.
  • Inserts metal tie rods to hold opposite faces of form panels to specified dimensions.
  • Measures, cuts, bends, splices, ties and/or welds rebar, bar supports, welded wire fabric or other support material and places it within the form according to specifications.
  • Anchors, shores and otherwise braces forms to fixed objects using nails, bolts, anchor rods, steel cables, planks and timbers.
  • Assembles and installs prefabricated forms according to specifications.
  • Lifts sections of forms and places them in position according to blueprints, oral instructions, or diagrams, using rule, plumb rule, or level.
  • Directs, through proper hand signals, crane operator in lifting and placing heavier sections of forms.
  • Nails, bolts, or clamps form sections together using bolts and wing nuts, clamps, or patented fasteners.
  • Aligns and sets forms to elevation according to diagram or oral instructions from lead carpenter, carpentry foreman or superintendent using plumb rule, level and foot rule.
  • Erects any scaffolding or rigging necessary to complete the project.
  • Places concrete during footing, wall, and/or grade beam pours.
  • Observes forms as concrete is being poured to insure that they are being held in position by bracing and fastenings.
  • Removes forms after concrete has hardened.
  • Keeps work area clean and safe at all times.
  • Observes all building codes, company, state, OSHA safety rules, regulations and guidelines.
  • Reports any job site and/or WB employee related safety violation(s) to appropriate supervisory personnel.
  • Serves as a safe and productive member of a construction crew/team.
  • Perform all assigned roles, responsibilities, and related work processes/tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times.

ID21
Position Requirements
Education and/or Experience
  • High School Diploma/GED/Apprenticeship - preferred
  • Vocational or technical training in construction - desirable

Knowledge, Skills and Abilities Required
  • Completing assigned work tasks and processes in work teams
  • Analyzing and interpreting blueprints and shop drawings
  • Measuring and cutting wood and metal precisely
  • Problem-solving and troubleshooting
  • Communicating/reporting with foremen and team members
  • Implementing site safety and work-task plans
  • Recognizing and correcting job site hazards
  • Making work task-level judgments and decisions.
  • Listening, speaking, reading and writing at a basic level
  • Thinking logically and critically
  • Seeing and interpreting details close up and far away
  • Consistent focus on Safety, Quality, Production, and Innovation
  • Interacting with other trades or subcontractors

Working Conditions
  • Outdoors - frequently
  • Indoors - rarely
  • Loud noise - frequently
  • Temperatures - seasonal
  • Personal Protective Equipment - at all times
  • Multi-activity worksites - frequently
  • Traveling/out of town - frequently
  • 40 to 55-hour work week - frequently
  • Heights and depths - frequently

Certificates, Licenses, Registrations
  • Valid driver's license - preferred
  • OSHA - 10 Hour Certification - preferred
  • OSHA 30-Hour Certification - preferred
  • First Aid/CPR - desirable
  • Powder actuated tool certification - preferred
  • All-terrain material handler certification -desirable
  • Aerial lift certification - desirable
  • WB Craft Training & other certifications through Form Carpenter Technician- preferred

Physical Demands
  • Lifting and carrying up to 50 pounds
  • Frequent lifting, bending, kneeling and reaching
  • Walking Frequently
  • Reaching above shoulder
  • Standing for long periods of time
  • Climbing ladders, working at heights, wearing/using fall protection harness
  • Handling and assembling formwork
  • Handling and installing concrete reinforcement materials
  • Handling, placing, and finishing of concrete

Equal Opportunity Employer
Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy.

What Wayne Brothers employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply