ZipRecruiter

Log In

1

First Article Inspection Jobs in Arizona (NOW HIRING)

Laborup

CMM Quality Inspector

Tempe, AZ · On-site

$31 - $33/hr

The role includes first article, in-process, and final inspection, working closely with machinists, programmers, and engineers to ensure parts meet customer specifications. Experience with other CMM ...

Laborup

CMM Quality Inspector

Tempe, AZ · On-site

$31/hr

The role includes first article, in-process, and final inspection, working closely with machinists, programmers, and engineers to ensure parts meet customer specifications. Experience with other CMM ...

AIRO Group

Quality Inspector

Phoenix, AZ · On-site

Complete First Article Inspection Reports (FAIRs) * Responsible for coordinating and communicating with vendors to address product quality issues. * Select appropriate measuring tools and techniques ...

The AIRO Group

Quality Inspector

Phoenix, AZ · On-site

Complete First Article Inspection Reports (FAIRs) * Responsible for coordinating and communicating with vendors to address product quality issues. * Select appropriate measuring tools and techniques ...

AIRO Group Holdings, Inc.

Quality Inspector

Phoenix, AZ · On-site

... first article inspection using in-house programs such as Net Inspect. The Inspector should be able to identify drawing revision changes as well as purchase order requirements. Basic knowledge of the ...

CMI Group Aerospace & Defense

FAI / CMM Inspector

Tempe, AZ · On-site

$24.25 - $31.25/hr

Perform FAI (First Article Inspection) * GD&T / Proficient at advanced mechanical inspection * Manual CMM inspection using CMM Manager or equivalent * Perform spot checks (In-process Inspection)

Crafted Staff

05303 - FAA Quality Inspector

Tucson, AZ · On-site

$20 - $24/hr

Creates & reviews First Article Inspection Reports (FAIR) IAW AS9102 * Performs Customer source inspection * Issues Authorized Release Certificates/Tags * Maintains Calibration recall and records

CMI Group Aerospace & Defense

FAI / CMM Inspector

Tempe, AZ · On-site

$24.25 - $31.25/hr

Operate CMM (must have experience)Perform FAI (First Article Inspection)GD&T / Proficient at advanced mechanical inspectionManual CMM inspection using CMM Manager or equivalentPerform spot checks (In ...

YO AI Labs

Aerospace Quality Engineer

Phoenix, AZ

Strong proficiency in GD&T (ASME Y14.5). * Solid understanding of AS9102 First Article Inspection requirement. * Experience with inspection tools (CMM, height gages, calipers, micrometers, etc.

TriMas Corporation

Quality Inspector

Tolleson, AZ · On-site

Prepares FAIR\DIP (FirstArticle Inspection Report\Detailed Inspection Plan) and bubbles blueprint. Essential Duties and Responsibilities * Performs first article, in-process. * Reads blueprints or ...

Rieke Packaging Systems

Quality Inspector

Tolleson, AZ · On-site

Prepares FAIR\DIP (FirstArticle Inspection Report\Detailed Inspection Plan) and bubbles blueprint. Essential Duties and Responsibilities * Performs first article, in-process. * Reads blueprints or ...

previous pagenext page

Showing results 21-40

All JobsFirst Article Inspection JobsFirst Article Inspection Jobs in Arizona

First Article Inspection information

What is first article inspection?

First Article Inspection (FAI) is a quality control process used in manufacturing to verify that a new or modified production process produces parts that meet all specified requirements. During FAI, the first item produced is thoroughly examined and measured against design specifications, drawings, and other requirements. This inspection helps identify problems early in the production process, ensuring that future items will consistently meet quality standards. FAI is commonly used in industries such as aerospace, automotive, and electronics.

What are the key skills and qualifications needed to thrive as a first article inspector?

To thrive as a First Article Inspector, you need a solid understanding of quality assurance processes, blueprint reading, and precision measurement techniques, often supported by experience in manufacturing or a related certification like ASQ. Proficiency with inspection tools such as calipers, micrometers, coordinate measuring machines (CMM), and familiarity with documentation systems like FAI forms and quality management software is essential. Strong attention to detail, analytical thinking, and effective communication are critical soft skills for accurately documenting and reporting inspection results. These competencies ensure that products meet required specifications, minimize defects, and maintain compliance with customer and regulatory standards.

What are some common challenges faced during the first article inspection process and how can they be managed?

One common challenge in First Article Inspection is ensuring all documentation and parts meet the exact specifications outlined by engineering drawings and customer requirements. Miscommunication between production, quality, and engineering teams can lead to delays or non-conformances. To manage these issues, it’s vital to establish clear checklists, maintain open communication channels, and utilize standardized FAI forms. Familiarity with industry standards like AS9102 and working closely with cross-functional teams can greatly streamline the process and minimize errors.

What is the difference between First Article Inspection vs Quality Control Inspector?

AspectFirst Article InspectionQuality Control Inspector
PurposeVerify that a new product meets design specifications before full productionMonitor and inspect ongoing production to ensure quality standards are maintained
TimingPerformed on the initial production run or prototypeConducted throughout the manufacturing process
FocusDesign conformance and compliance with specificationsProduct quality, defect detection, and process adherence
CredentialsKnowledge of engineering drawings, standards, and inspection methodsUnderstanding of quality standards, inspection techniques, and industry regulations

First Article Inspection focuses on verifying that a new product or component meets all design and quality specifications before mass production begins. In contrast, a Quality Control Inspector continuously monitors ongoing production to identify defects and ensure consistent quality. Both roles are essential in manufacturing but serve different stages of the quality assurance process.

What are popular job titles related to First Article Inspection jobs in Arizona?

For First Article Inspection jobs in Arizona, the most frequently searched job titles are:

What job categories do people searching First Article Inspection jobs in Arizona look for?

The top searched job categories for First Article Inspection jobs in Arizona are:

First Article Inspection jobs near you
Infographic showing various First Article Inspection job openings in Arizona as of September 2026, with employment types broken down into 51% Part Time, and 49% Temporary. Highlights an 100% In-person job distribution.

CMM Quality Inspector

Tempe, AZ • On-site

Laborup
1 - 10 employees
Learn more about Laborupexternal

$31 - $33/hr

Full-time

Posted 28 days ago

Job description

Overview

We’re hiring CMM Quality Inspectors for our aerospace precision machining facility in Tempe.

You’ll inspect complex, tight-tolerance components for aerospace, defense, semiconductor, and medical customers using a Zeiss CMM running Calypso software, along with manual inspection tools including micrometers, calipers, and other precision measuring equipment. The role includes first article, in-process, and final inspection, working closely with machinists, programmers, and engineers to ensure parts meet customer specifications.

Experience with other CMM platforms such as PC-DMIS is welcomed—we can train the Zeiss/Calypso specifics for candidates with a strong metrology background.

Why Join Us

  • Three-day workweek: Work Friday–Sunday and get paid for 40 hours while working 36.
  • Modern manufacturing: Work in a clean, precision machining environment producing components for aerospace, defense, semiconductor, and medical industries.
  • Collaborative quality team: Partner directly with machinists, engineers, and programmers to solve challenging dimensional issues and support high-precision manufacturing.

Compensation

  • $31 - $33 / hr total
  • $28 - $30 /hr base pay
  • $3 / hr weekend shift differential
  • Work for 36, paid for 40

Shift

  • Weekend Days: Friday–Sunday, 5:00 AM – 5:00 PM

Responsibilities

  • CMM Inspection: Run existing inspection programs on Zeiss CMMs using Calypso.
  • Manual Inspection: Measure parts using micrometers, calipers, height gauges, and other precision inspection tools.
  • First Article Inspection: Perform FAIs and create detailed dimensional inspection reports.
  • Blueprint Review: Interpret engineering drawings, GD&T, and customer specifications.
  • In-Process & Final Inspection: Verify dimensional compliance throughout production and before shipment.
  • Root Cause Support: Communicate dimensional issues with machinists and engineers to support corrective actions.
  • Calibration Support: Help maintain calibrated gauges and metrology equipment.
  • Inspection Records: Maintain accurate inspection reports and quality documentation.

Requirements

Qualifications

Required

  • CMM operating experience in a precision machining environment
  • Strong blueprint reading and interpretation skills
  • Ability to read and apply GD&T
  • Hands-on inspection experience using micrometers, calipers, and other precision measuring equipment
  • Experience running existing CMM inspection programs
  • Experience performing first article inspections

Preferred

  • Calypso experience
  • Zeiss CMM experience
  • Experience with other CMM software such as PC-DMIS
  • Light CMM programming experience
  • Aerospace, defense, semiconductor, or medical manufacturing experience
  • Experience in an AS9100 environment
  • Root cause and corrective action experience

#ZR