2

Entrylevel Electrical Design Engineer Jobs in Fairfield, CT

Develop alternate methods or design concepts to resolve problems or to improve processes/services. * Solve straightforward electrical engineering problems. Analyze possible solutions and assess each ...

Develop alternate methods or design concepts to resolve problems or to improve processes/services. * Solve straightforward electrical engineering problems. Analyze possible solutions and assess each ...

The Electrical Engineer will responsible for the design of high voltage electrical substations. The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship.

Collaborate cross-functionally with design engineering, manufacturing, quality, and supply chain ... Bachelor's degree in Electrical Engineering or Computer Engineering * Demonstrated experience in ...

Electrical Engineer

Shelton, CT · On-site

$115K - $140K/yr

The role spans PCB design, cable and harness engineering, EMC compliance, component obsolescence management, and field electrical support for a global fleet of rail inspection vehicles. It also ...

People come to work at Microchip because we help design the technology that runs the world. They ... MS in Electrical or Computer Engineering, with coursework in the following areas: * Microelectronic ...

Collaborate cross-functionally with design engineering, manufacturing, quality, and supply chain ... Bachelor's degree in Electrical Engineering or Computer Engineering * Demonstrated experience in ...

Staff Electrical Engineer

Melville, NY · On-site

$72K - $85K/yr

H2M architects + engineers , a multidiscipline architectural, engineering, environmental consulting and design firm has an opening for an entry-level Staff Engineer in our MEP/Electrical Department.

About the role The Electrical Engineer will design, develop and test all aspects of electrical components, equipment, products, machinery and/or systems. Familiar with standard concepts, practices ...

Overview The Electrical Engineer will design, develop and test all aspects of electrical components, equipment, products, machinery and/or systems. Familiar with standard concepts, practices and ...

Design and implement test procedures to ensure that products meet quality and performance standards ... Collaboration: Work closely with electrical, mechanical, and manufacturing engineers to define ...

Design, develop, and test analog and power electronic circuits, including AC-DC and DC-DC ... Bachelor's degree in Electrical Engineering or related field * 3-7 years of relevant industry ...

Design, develop, and test analog and power electronic circuits, including AC-DC and DC-DC ... Bachelor's degree in Electrical Engineering or related field * 3-7 years of relevant industry ...

Electrical Engineer Location: Hauppauge, NY (100% Onsite) Schedule: Full-Time | Contract-to-Hire ... Support prototype development, design verification, and product validation activities. * Document ...

New

Showing results 21-40

Entrylevel Electrical Design Engineer information

See Fairfield, CT salary details

$52.5K

$103.1K

$150.9K

How much do entrylevel electrical design engineer jobs pay per year?

As of Aug 10, 2026, the average yearly pay for entrylevel electrical design engineer in Fairfield, CT is $103,056.00, according to ZipRecruiter salary data. Most workers in this role earn between $84,100.00 and $117,800.00 per year, depending on experience, location, and employer.

What is the difference between Entrylevel Electrical Design Engineer vs Electrical Drafter?

AspectEntrylevel Electrical Design EngineerElectrical Drafter
Required CredentialsBachelor's degree in Electrical Engineering or related fieldTechnical diploma or associate degree in drafting or engineering technology
Work EnvironmentDesign offices, engineering firms, construction sitesDesign offices, manufacturing, or construction sites
Employer & Industry UsageEngineering firms, construction companies, manufacturingArchitectural and engineering firms, manufacturing
Common Search & ComparisonYesYes

The main difference between an Entrylevel Electrical Design Engineer and an Electrical Drafter lies in their roles. The engineer focuses on designing electrical systems, performing calculations, and ensuring compliance, requiring a bachelor's degree. The drafter creates detailed technical drawings based on engineers' designs, often with a technical diploma. Both work in similar environments and industries, but their responsibilities and qualifications differ.

What are popular job titles related to Entrylevel Electrical Design Engineer jobs in Fairfield, CT? For Entrylevel Electrical Design Engineer jobs in Fairfield, CT, the most frequently searched job titles are:
What job categories do people searching Entrylevel Electrical Design Engineer jobs in Fairfield, CT look for? The top searched job categories for Entrylevel Electrical Design Engineer jobs in Fairfield, CT are:
What cities near Fairfield, CT are hiring for Entrylevel Electrical Design Engineer jobs? Cities near Fairfield, CT with the most Entrylevel Electrical Design Engineer job openings:
Infographic showing various Entrylevel Electrical Design Engineer job openings in Fairfield, CT as of June 2026, with employment types broken down into 35% Full Time, 60% Part Time, and 5% Contract. Highlights an 84% Physical, 5% Hybrid, and 11% Remote job distribution, with an average salary of $103,056 per year, or $49.5 per hour.

Healthcare Engineer - Electrical Engineer

SD Department of Veterans Affairs

Northport, NY • On-site

$130K/yr

Full-time

Posted 17 days ago


Job description

The position serves as a Healthcare Engineer - Electrical Engineer specializing in electrical engineering and providing construction administration for Minor Construction Projects, Non-Recurring Maintenance (NRM) Projects, Station Level Projects, and Leases, including all areas and aspects (architectural, electrical, life safety, mechanical, civil, structural, etc.) at the Northport NY VA Medica Center and associated Community Based Outpatient Clinic (CBOC)'s.

Qualifications:

Applicants pending the completion of educational or certification/licensure requirements may be referred and tentatively selected but may not be hired until all requirements are met.
Basic Requirements:

  • Citizenship: Be a citizen of the United States (U.S.). Non-citizens may only be appointed when it is not possible to recruit qualified citizens in accordance with VA Policy.
  • Education: Successfully completed a bachelor's degree or higher in Engineering or Architecture. To be acceptable, the curriculum must be from a school with at least one curriculum accredited by the Accreditation Board for Engineering and Technology, Engineering Accreditation Commission (excludes engineering technology) or National Council of Architectural Registration Boards curriculum. Examples of acceptable engineering and architectural degrees include, but are not limited to: Electrical Engineering, Mechanical Engineering, Biomedical Engineering, Civil Engineering, Architecture and Architectural Engineering. Titles may vary from educational institutions and change over time; OR;
  • Evidence of passing the Fundamentals of Engineering Exam with a bachelor's degree. Evidence can be in the form of an Engineering in Training certificate issued from any State, the District of Columbia, Guam or Puerto Rico, or test results from the National Council of Examiners for Engineering and Surveying (NCEES) identifying a passing score; OR;
  • Evidence of current professional registration or licensure as a Professional Engineer or Architect. Evidence of current professional registration or licensure can be from any State, the District of Columbia, Guam or Puerto Rico.
Grade Determination: Healthcare Engineer (Electrical Engineer) GS-0801-12:
  • Experience: Candidates must possess one year of experience equivalent to the GS-11 grade level in the Healthcare Engineering - Electrical Engineer field. Qualifying GS-11 grade level experience includes, but is not limited to: Extensive experience in the electrical design and engineering of low, medium, and high-voltage systems specifically within active healthcare facilities or complex commercial medical centers; ability to prepare, read, and interpret complex architectural and engineering drawings across all major disciplines, including Mechanical, Plumbing, and Fire Protection (MEP/FP); applying a working knowledge of NFPA, OSHA, and ANSI standards within a medical environment, while implementing energy conservation and sustainability goals (such as the VA GEMS program); providing expert research and analysis on engineering construction, cost estimation, and the feasibility of new infrastructure technologies in a clinical setting. AND;
  • Demonstrated Knowledge, Skills, and Abilities. In addition to the experience above, the candidate must demonstrate the following KSAs:
    • (a) Knowledge of mechanical, electrical, structural, civil and other engineering/architectural principles, practices and their applications in the healthcare environment.
    • (b) Knowledge of healthcare industry standards and related regulatory agency and organization (including, but not limited to The Joint Commission (TJC), Occupational Safety and Health Administration (OSHA), National Fire Protection Agency (NFPA), etc.) regulations, requirements, guides, policies, procedures, directives, standards and general medical program requirements as they relate to healthcare engineering.
    • (c) Knowledge of construction standards, methods, practices and techniques, materials and equipment to determine compliance with engineering regulations and standards.
    • (d) Skill in researching and analyzing information, conditions, human factors and projections to make sound engineering and business recommendations and decisions to proactively identify problems and develop innovative solutions within the context of applicable rules, regulations and procedures.
    • (e) Ability to plan and execute complex, multi-faceted projects and inspections while prioritizing resources against approved scopes of work, contract documents and budgets.
    • (f) Ability to organize and lead multi-disciplinary task forces with members from different departments and divisions, as well as design and construction firms.
May qualify based on being covered by the Grandfathering Provision as described in the VA Qualification Standard for this occupation (only applicable to current VHA employees who are in this occupation and meet the criteria).
Preferred Experience: An Electrical Engineer with extensive design experience across low, medium, and high voltage systems, specifically within healthcare and commercial environments.
Reference: For more information on this qualification standard, please visit https://www.va.gov/ohrm/QualificationStandards/.
The full performance level of this vacancy is GS-12.
Physical Requirements: The work environment involves everyday risks or discomforts that require normal safety precautions typical of such places as offices, training rooms, and libraries. The work area is adequately lighted, heated, and ventilated. The incumbent must also work outdoors in all types of weather. There may be occasional exposure to moderate risks or discomforts in storage areas or hazardous waste sites. The work is primarily sedentary, although some physical effort may be required, e.g., walking, standing, climbing ladders, stooping, kneeling, and carrying light items such as manuals or briefcases, or driving or traveling by motor vehicle.Education:Note: Only education or degrees recognized by the U.S. Department of Education from accredited colleges, universities, schools, or institutions may be used to qualify for Federal employment. You can verify your education here: http://ope.ed.gov/accreditation/. If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.Employment Type: OTHER