2

Entry Level Solids Control Jobs (NOW HIRING)

Stormwater Operator I

Eagle Mountain, UT ยท On-site

$22.17 - $23.27/hr

Operator I: $22.17 - $23.27GENERAL PURPOSEPerforms a variety of entry level skilled duties related ... Assist catch-basin maintenance; cleans and clears basins of accumulated solids and sediments to ...

Waste Water Technician I

Dolton, IL ยท On-site

$21 - $25.50/hr

Apply today! About the role The Wastewater Technician I is an entry level position ... Perform basic chemical analysis such as pH, flash point, FOG, solids, and ammonia. * Operate a ...

West Palm Beach, FL Travel: 75% Position Summary The Project Engineer I is an entry-level role ... Provide oversight and documentation related to project quality control in accordance with the ...

West Palm Beach, FL Travel: 75% Position Summary The Project Engineer I is an entry-level role ... Provide oversight and documentation related to project quality control in accordance with the ...

West Palm Beach, FL Travel: 75% Position Summary The Project Engineer I is an entry-level role ... Provide oversight and documentation related to project quality control in accordance with the ...

Waste Water Technician I

Dolton, IL ยท On-site

$21 - $25.50/hr

About the role The Wastewater Technician I is an entry level position responsible for safely ... Perform basic chemical analysis such as pH, flash point, FOG, solids, and ammonia. * Operate a ...

Showing results 41-59

Entry Level Solids Control information

See salary details

$15

$19

$21

How much do entry level solids control jobs pay per hour?

As of Aug 23, 2026, the average hourly pay for entry level solids control in the United States is $19.86, according to ZipRecruiter salary data. Most workers in this role earn between $19.23 and $21.15 per hour, depending on experience, location, and employer.

What is an entry level solids control technician?

Entry level solids control jobs involve assisting with the operation and maintenance of equipment that separates drilling fluids and solids at oil and gas drilling sites. Workers help monitor and clean drilling mud, operate centrifuges and shakers, and ensure proper disposal of waste materials. These roles are crucial for maintaining drilling efficiency, minimizing environmental impact, and ensuring compliance with regulations. Entry level positions typically require physical work, attention to safety, and on-the-job training.

What skills and qualifications are needed to thrive as an entry level solids control technician?

To thrive as an Entry Level Solids Control Technician, you need a basic understanding of drilling operations, mechanical aptitude, and a high school diploma or equivalent. Familiarity with solids control equipment, centrifuges, shale shakers, and safety protocols is commonly required, with on-the-job training or certifications like H2S safety often provided. Strong teamwork, attention to detail, and problem-solving skills help you adapt to demanding field conditions and communicate effectively with drilling crews. These abilities are crucial for maintaining efficient drilling operations, ensuring safety, and minimizing environmental impact.

What are common challenges faced by entry level solids control technicians, and how can they be addressed?

Entry Level Solids Control technicians often face challenges such as adapting to long shifts, working in remote locations, and handling physically demanding tasks involving heavy equipment. Teamwork is crucial, as you'll collaborate closely with drilling crews and other technicians to maintain equipment and ensure environmental compliance. Staying proactive in learning operational procedures and safety protocols helps ease the transition into the role, and most companies provide comprehensive on-the-job training and mentorship to support new hires. Embracing open communication and seeking feedback from experienced colleagues can also help overcome initial hurdles.

What is the difference between Entry Level Solids Control vs Entry Level Mud Engineer?

AspectEntry Level Solids ControlEntry Level Mud Engineer
CertificationsBasic safety and industry-specific trainingBasic safety, industry-specific training, possibly additional certifications
Work EnvironmentOil and gas drilling sites, solids control equipment areasDrilling rigs, mud processing facilities
Industry UsageCommonly used in oilfield operations for solids separationUsed for designing and managing drilling mud systems

Entry Level Solids Control and Entry Level Mud Engineer roles both operate within the oil and gas industry, focusing on drilling operations. While solids control technicians primarily handle equipment for separating solids from drilling fluids, mud engineers design and optimize mud systems. Both roles require safety training and industry certifications, but mud engineers often need more specialized knowledge. Understanding these differences helps job seekers identify the right entry point in drilling operations.

More about Entry Level Solids Control jobs

What cities are hiring for Entry Level Solids Control jobs?

Cities with the most Entry Level Solids Control job openings:

What are the most commonly searched types of Solids Control jobs?

The most popular types of Solids Control jobs are:

What states have the most Entry Level Solids Control jobs?

States with the most job openings for Entry Level Solids Control jobs include:

Infographic showing various Entry Level Solids Control job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 75% Full Time, 20% Part Time, 3% Contract, and 1% Nights. Highlights an 95% Physical, 1% Hybrid, and 4% Remote job distribution, with an average salary of $41,300 per year, or $19.9 per hour.

Stormwater Operator I

Eagle Mountain City

Eagle Mountain, UT โ€ข On-site

$22.17 - $23.27/hr

Full-time

Posted 11 days ago


Job description

Operator I: $22.17 - $23.27GENERAL PURPOSEPerforms a variety of entry level skilled duties related to city-wide storm water operations, including construction, collection and maintenance.SUPERVISION RECEIVEDWorks under the general supervision of the Storm Water Supervisor.SUPERVISION EXERCISED:None.ESSENTIAL FUNCTIONSParticipates in storm water system cleaning, debris and obstacle cleaning, excavation and repair of storm water lines, connections, manholes, debris basins, dry-wash and storm water retention basins and their appurtenances; performs seasonal maintenance, i.e., snow plow operation and snow removal.Cleans storm water lines; excavates, repairs and replace storm water lines and mains; operates hydro/jet truck and vactor truck to clean the storm drain system; inspect and clean City owned and privately owned storm drain basins, inlet boxes, manholes, oil/grit separators, canals, and pipes; operates Kubota tractor with brush-hog to groom roadway edges and swells; spray, cut, and remove weeds; trim shrubs and trees as necessary to maintain detention basins, ponds, and drainage channels.Assist catch-basin maintenance; cleans and clears basins of accumulated solids and sediments to prevent clogging of drainage lines and flooding; monitors catch basin grate tops to prevent accumulation and disposes of blockage; oversees and performs storm water swell construction ensuring proper slope and grade for improved water velocity and flow.Assist in the maintenance of storm water systems and storm water system equipment in operating order by inspecting, removing, repairing, and replacing malfunctioning parts and sections; conduct dry weather testing of storm drain outfall locations throughout the City. Operates a variety of vehicles, tools, and equipment used in the maintenance and repair of storm water collection systems; sets up traffic barricades and control equipment in accordance with the MUTCD; observe safety precautions regarding traffic control, confined space entrance, trenching, excavating, and power equipment operation.Assist to public inquiries in a courteous manner; provide information within the area of assignment; investigate and resolve complaints concerning the storm water collection system in an efficient and timely manner.Assist in the remove and inspect manhole covers and manholes; place and finish concrete to raise manholes to street surfaces; replace manhole covers as needed; clean storm drains; remove water from flooded streets.Assist and may perform light maintenance on service vehicles and equipment to ensure safe and effective operations; checks oil and fluid levels, tire air pressure, etc.; schedules service equipment for comprehensive preventive maintenance. Required to be on-call for emergencies; snow removal, flooding, potholes, etc.MINIMUM QUALIFICATIONSEducation and Experience: Graduation from high school or equivalent; plus one (1) year of specialized training provided through vocational college or industry sponsored workshops, conferences, etc.AND One (1) year of experience performing closely related duties, i.e., utility system construction, pipefitting, etc.; OR An equivalent combination of education and experience. Knowledge, Skills, and Abilities:Some knowledge of pipeline construction methods, practices and procedures for storm water collection systems; hazards and precautions associated with trench work and pipe line construction and maintenance; interpersonal communication skills; basic hand and power tools required to install and maintain pipe line; traffic control and diversion; tools and equipment required to lay and repair storm water lines; care of required tools and equipment; OSHA safety standards, etc. Skill in the operation of heavy mechanized equipment as required by the position, i.e. ,street sweeping, skid steers, backhoes, trackhoes, loaders, tractors, crane trucks, forklifts, trash pumps, weed whips, etc.Ability to adapt to emergency or unusual situations; tolerate weather extremes in the work place; communicate effectively, verbally and in writing; plan and organize work of subordinate personnel; evaluate employee performance and make related decisions; enforce policies, procedures, regulations, and standards without partiality; perform strenuous manual labor; develop working relationships with supervisors, co-workers and the public. Ability to lift 70 lbs. Special Qualifications: These are required to obtain in the first 6 months-1 year of work.Must possess a valid Class A CDL.Must become CPR certified.Must become forklift certified.Must become confined space certified.Must become trench shoring certified.Must become flagger certified. Work Environment:Employees in this position normally work in an outdoor environment, subject to changing and seasonal weather extremes. Frequently, tasks require a variety of physical activities, generally involving muscular strain, related to walking, standing, stooping, sitting, reaching, and lifting; daily potential for hazardous exposure to electrical shock, industrial wastes and raw sewage (containing pathogens such as typhoid, paratyphoid, dysentery, polio, tetanus, etc.); daily exposure to moving parts and equipment such as pumps, motors, heavy equipment, etc.; daily or regular exposure to traffic hazards working in the public right-of-way; daily or regular exposure to hazards associated with confined space operations. Talking, hearing and seeing essential to performing required job functions. Common eye, hand, finger dexterity exist. Mental application utilizes memory for details, verbal instructions, emotional stability, discriminating thinking and creative problem solving. 
Job Posted by ApplicantPro