ZipRecruiter

Log In

2

Entry Level Solar Panel Manufacturing Jobs in Austin, TX

T1 Energy

HR Systems & Integrations Analyst

Austin, TX · On-site

$90 - $125/hr

By the time you finish reading this paragraph, we will have produced two solar panels that will power American homes and fuel domestic AI. We're focused on building advanced American manufacturing ...

Doist

HR Systems & Integrations Analyst

Austin, TX · On-site

$85 - $110/hr

By the time you finish reading this paragraph, we will have produced two solar panels that will power American homes and fuel domestic AI. We're focused on building advanced American manufacturing ...

New

Control Panels USA

Inbound Warehouse Coordinator

Georgetown, TX · On-site

$16.75 - $21.50/hr

Control Panels USA is seeking an entry level Inbound Warehouse Coordinator to join our growing team ... Control Panels USA is a manufacturer of Control Panels and Relay Rack assemblies in a wide range of ...

Control Panels USA

Inbound Warehouse Coordinator

Georgetown, TX · On-site

$16.75 - $21.50/hr

Control Panels USA is seeking an entry level Inbound Warehouse Coordinator to join our growing team ... Control Panels USA is a manufacturer of Control Panels and Relay Rack assemblies in a wide range of ...

Actalent

Process Engineering Technician

Austin, TX

$30 - $42/hr

... (Entry Level Engineer) Launch Your Engineering Career in Advanced Manufacturing We're seeking an ... Build and wire electrical control panels and equipment components. * Support equipment setup ...

previous page

Showing results 21-38

All JobsSolar Panel Manufacturing JobsEntry Level Solar Panel Manufacturing JobsEntry Level Solar Panel Manufacturing Jobs in Austin, TX

Entry Level Solar Panel Manufacturing information

See Austin, TX salary details

$14

$24

$35

How much do entry level solar panel manufacturing jobs pay per hour?

As of Aug 20, 2026, the average hourly pay for entry level solar panel manufacturing in Austin, TX is $24.28, according to ZipRecruiter salary data. Most workers in this role earn between $19.76 and $26.20 per hour, depending on experience, location, and employer.

What is the difference between Entry Level Solar Panel Manufacturing vs Entry Level Solar Panel Installation?

AspectEntry Level Solar Panel ManufacturingEntry Level Solar Panel Installation
Required CredentialsHigh school diploma or equivalent; technical training often preferredHigh school diploma or equivalent; safety certifications beneficial
Work EnvironmentFactories or manufacturing plants; indoor, assembly line settingOn-site at installation locations; outdoor, variable weather conditions
Employer & Industry UsageManufacturers producing solar panels; industrial settingsConstruction companies, solar installation firms; renewable energy sector

Entry Level Solar Panel Manufacturing involves assembling and producing solar panels in factory settings, focusing on technical skills and factory safety. In contrast, Entry Level Solar Panel Installation requires on-site work installing solar systems, emphasizing safety and physical skills. Both roles are essential in the solar industry but differ mainly in work environment and job functions.

What are the most commonly searched types of Solar Panel Manufacturing jobs in Austin, TX?

The most popular types of Solar Panel Manufacturing jobs in Austin, TX are:

What are popular job titles related to Entry Level Solar Panel Manufacturing jobs in Austin, TX?

For Entry Level Solar Panel Manufacturing jobs in Austin, TX, the most frequently searched job titles are:

What job categories do people searching Entry Level Solar Panel Manufacturing jobs in Austin, TX look for?

The top searched job categories for Entry Level Solar Panel Manufacturing jobs in Austin, TX are:

What cities near Austin, TX are hiring for Entry Level Solar Panel Manufacturing jobs?

Cities near Austin, TX with the most Entry Level Solar Panel Manufacturing job openings:

Entry Level Solar Panel Manufacturing jobs near you

Process Controls Engineer, Solar Cell Factory (Starlink)

SpaceX

Bastrop, TX • On-site

$83K - $107K/yr

Full-time

Re-posted 22 days ago

SpaceX rating

8.7

Company rating: 8.7 out of 10

Based on 149 frontline employees who took The Breakroom Quiz

17th of 72 rated aerospace companies

Job description

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
PROCESS CONTROLS ENGINEER, SOLAR CELL FACTORY (STARLINK)
The Solar Cell team is revolutionizing power generation for space applications through advanced solar cell manufacturing. We're scaling production of high-efficiency solar cells to support sustainable energy solutions for Starlink constellations, launch vehicles, and beyond. As a Solar Cell Factory Process Controls Engineer, you will design, build, and optimize controls and automation systems for the delivery of critical gases and chemicals in solar cell fabrication. This role requires a detail-oriented engineer passionate about safe handling of hazardous materials in a high-volume manufacturing environment, ensuring reliable control code and safe instrumentation and design of processes like vacuum deposition and etching while minimizing risks and maximizing efficiency in our cutting-edge solar cell factory.
RESPONSIBILITIES:
  • Design, implement, and maintain automation systems including PLC programming and SCADA development for gas farm operations (e.g., vaporizers, storage, and transfer systems) and wastewater treatment processes (e.g., solids separation, clarification, and chemical dosing) to ensure safe, efficient, and compliant performance
  • Develop and program PLC control logic, PID loops, and interlocks for centralized control of distributed subsystems, optimizing for real-time monitoring of parameters such as pressure, temperature, flow, pH, and effluent quality
  • Select, calibrate, and integrate field instrumentation (e.g., transmitters, sensors, analyzers) in hazardous environments, ensuring compatibility with safety standards like SIL, ATEX, and EPA/NPDES regulations
  • Lead commissioning, FAT/SAT testing, and troubleshooting of control systems, performing root-cause analysis to minimize downtime and support 24/7 operations with rapid alarm response
  • Design electrical systems compliant to NEC, NFPA, & UL508A regulations

BASIC QUALIFICATIONS:
  • Bachelor's degree in engineering, physics, or chemical discipline
  • 1+ years of experience with fluids/systems manufacturing, controls and automation, and/or programming (internship and extracurricular experience is applicable)

PREFERRED SKILLS AND EXPERIENCE:
  • Excited by a quick and iterative design and manufacturing role
  • Proven ability to solve complex problems with simple solutions in both design and implementation stages
  • Excellent communication skills both written and verbal, with the ability to make plans and directional recommendations collaboratively and cross-functionally
  • Ability to engineer creative, new approaches to problems while adhering to ANSI/RIA15.06/OSHA safety requirements to keep a factory safe
  • Hazardous process expertise in an aerospace, oil and gas, or chemical industry where high pressure or hazardous systems for fluids or gasses were in use

Experience with at least one of the specific disciplines listed below. The ideal candidate is interested in learning at least the fundamentals of the other areas they are not yet strong in.
Electrical/Industrial Controls:
  • Electrical sizing of motors, valves, pneumatics, cables, circuit protection, VFDs, motor starters, various other motion systems
  • Design of fail-safe electrical circuits using both safety logic controllers and safety-rated relays
  • Hands-on experience troubleshooting industrial electrical systems using tools like multimeters, oscilloscopes, EMI probes
  • Proficiency in understanding and creating electrical schematics and single line diagrams (EPLAN preferred)
  • Field bus networks, serial communication, Profinet and Ethernet communications
  • Hands-on experience designing and commissioning high quality electrical panels and electro-mechanical systems with appropriate safety considerations in mind
  • Knowledge of NEC, NFPA, UL508A codes with ability to ensure compliance with control system safety standards

Industrial Software:
  • PLC programming, preferably Siemens TIA Portal structured text + ladder
  • HMI, SCADA, IoT (MQTT, OPC-UA), ignition systems with focus on user friendly navigation and machine health monitoring and control
  • Field Bus Networking protocols, preferably EtherCAT, Profinet, Profisafe, Ethernet/IP
  • Robotics programming, preferably ABB
  • Industrial software application to mechanical assemblies, electrical systems, sensors, pneumatics/hydraulics, including how to safely checkout these interdisciplinary systems prior to production implementation

ADDITIONAL REQUIREMENTS:
  • Ability to work long hours and weekends as necessary to support critical milestones

ITAR REQUIREMENTS:
  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

What SpaceX employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

SpaceX logo

About SpaceX

Sourced by ZipRecruiter

Industry

Aerospace product and parts manufacturing, data services, guided missile and space vehicle manufacturing and satellite telecommunications

Company size

1,001 - 5,000 Employees

Headquarters location

Hawthorne, CA, US

View All SpaceX Jobs

Apply