ZipRecruiter

Log In

2

Entry Level Meta Mechanical Engineer Jobs in Anderson, SC

Amentum

Applied Multiphysics Engineer I

Greenville, SC · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

We are looking for an entry-level or early career Mechanical Engineer with strong technical skills, academic achievement, and sense of ownership. Duties and Responsibilities: Projects are often ...

Pae

Applied Multiphysics Engineer I

Greenville, SC

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

We are looking for an entry-level or early career Mechanical Engineer with strong technical skills, academic achievement, and sense of ownership. Duties and Responsibilities: Projects are often ...

Pae

Applied Multiphysics - Engineer II

Greenville, SC

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

We are looking for an entry-level or early career Mechanical Engineer with strong technical skills, academic achievement, and sense of ownership. Duties and Responsibilities: Projects are often ...

Amentum

Applied Multiphysics - Engineer II

Greenville, SC · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

We are looking for an entry-level or early career Mechanical Engineer with strong technical skills, academic achievement, and sense of ownership. Duties and Responsibilities: Projects are often ...

SNAP Diagnostics

Analytical Engineer II

Anderson, SC

Perform optimization and sensitivity analyses through design of experiments (DOE) and meta-modeling ... Develop reduced order plant models (ROM) to predict mechanical and thermal system performance using ...

M Force

Engineering Technologist 1

Greenville, SC

$20/hr

... entry-level Engineering Technologist to support engineering and utility distribution design ... Mechanical Engineering, Engineering Technology, or a related engineering discipline who is eager to ...

Michelin

Quality Process Engineer

Greenville, SC · On-site

For Entry Level, this can include internship, Co-op, apprentices, military service, or similar programs. * B.S. Degree in Mechanical, Chemical, Material Science Engineering or other technical degree ...

Michelin

Quality Process Engineer

Anderson, SC · On-site

For Entry Level, this can include internship, Co-op, apprentices, military service, or similar programs. * B.S. Degree in Mechanical, Chemical, Material Science Engineering or other technical degree ...

Michelin

Quality Process Engineer

Greenville, SC

For Entry Level, this can include internship, Co-op, apprentices,military service,or similar programs. * B.S. Degree in Mechanical, Chemical, Material Science Engineering or other technical degree ...

Michelin

Quality Process Engineer

Anderson, SC

For Entry Level, this can include internship, Co-op, apprentices,military service,or similar programs. * B.S. Degree in Mechanical, Chemical, Material Science Engineering or other technical degree ...

next page

Showing results 1-20

All JobsMeta Mechanical Engineer JobsEntry Level Meta Mechanical Engineer JobsEntry Level Meta Mechanical Engineer Jobs in Anderson, SC

Entry Level Meta Mechanical Engineer information

See Anderson, SC salary details

$16

$30

$50

How much do entry level meta mechanical engineer jobs pay per hour?

As of Aug 19, 2026, the average hourly pay for entry level meta mechanical engineer in Anderson, SC is $30.39, according to ZipRecruiter salary data. Most workers in this role earn between $24.66 and $34.33 per hour, depending on experience, location, and employer.

Does Meta have entry-level positions?

Meta offers entry-level positions, including roles such as Meta Mechanical Engineer, which typically require a relevant degree and some internship or project experience. These positions often involve teamwork, problem-solving, and familiarity with tools like CAD software, and they are suitable for recent graduates or those new to the field.

What are the most commonly searched types of Meta Mechanical Engineer jobs in Anderson, SC?

The most popular types of Meta Mechanical Engineer jobs in Anderson, SC are:

What are popular job titles related to Entry Level Meta Mechanical Engineer jobs in Anderson, SC?

For Entry Level Meta Mechanical Engineer jobs in Anderson, SC, the most frequently searched job titles are:

What job categories do people searching Entry Level Meta Mechanical Engineer jobs in Anderson, SC look for?

The top searched job categories for Entry Level Meta Mechanical Engineer jobs in Anderson, SC are:

What cities near Anderson, SC are hiring for Entry Level Meta Mechanical Engineer jobs?

Cities near Anderson, SC with the most Entry Level Meta Mechanical Engineer job openings:

Entry Level Meta Mechanical Engineer jobs near you
Infographic showing various Entry Level Meta Mechanical Engineer job openings in Anderson, SC as of August 2026, with employment types broken down into 84% Full Time, 13% Part Time, 2% Contract, and 1% Nights. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $63,212 per year, or $30.4 per hour.

Applied Multiphysics Engineer I

Amentum

Greenville, SC • On-site

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 7 days ago

Job description

Amentum Advanced Solutions is a performance unit of our Engineering & Technology (E&T) Line of Business. The Amentum Advanced Solutions specializes in the design, construction, and operation of unique and complex research and development facilities, including, as examples, wind tunnels (aerospace, automotive, and motorsports), rocket test stands, climatic chambers, jet engine test cells, acoustic chambers, altitude test facilities, captive trajectory systems, and nuclear facilities. Our projects span the automotive, motorsports, defense, nuclear, and aerospace markets. Recent clients include Audi, Boeing, BMW, Ford, Honda, General Motors, NASA, Stellantis, U.S. Air Force, U.S. Navy, U.S. Department of Energy, Volkswagen, and many others in North America, Europe, and Asia.
Most of your designs will be unique, and you will usually be working on several projects at one time in a dynamic, challenging, and even fun environment. Many designs are "blank sheet of paper," with few analogs or comparisons. This position will provide you with an exciting opportunity to join Applied Multiphysics projects as part of a multi-discipline team of professionals. We are looking for an entry-level or early career Mechanical Engineer with strong technical skills, academic achievement, and sense of ownership.
Duties and Responsibilities:
Projects are often complex and multi-discipline. For each assignment, Junior Engineers will be issued specific objectives, approaches, and possible solutions by a supervising engineer. The Junior Engineer:
  • Independently performs short duration project tasks with clearly defined requirements and goals.
  • Analyzes and/or evaluates the results of an analysis using techniques prescribed by senior engineers or supervisors.
  • Accomplishes, complete tasks of limited scope or solves problems which require investigation of a limited number of variables.
  • Prepares calculations, and assists in the preparation of, presentations and technical reports.
  • Supports interface development with other disciplines, working closely with machine design, structural, mechanical process, controls and instrumentation, and aerodynamics/fluid dynamics engineers.
  • Aids in the production of complete, detailed drawing packages, by supplying design input or performing CAD work.

Minimum Experience/Education:
  • B.S.M.E. from an accredited engineering school

Key Skills:
  • Coursework:
    • Statics & Dynamics
    • Mechanics of Materials
    • Finite Element Analysis
    • Mechanisms/Machine Design
    • Kinematics
    • Fluid Dynamics
    • Thermodynamics
    • Heat Transfer
    • System Dynamics
    • 3D CAD
  • Strong sense of ownership and pride in execution of work
  • Mechanical intuition

Preferred Qualifications:
  • Mechanical Engineering Internships and/or Co-ops, particularly in adjacent industries (see below)
  • 3D CAD experience; Inventor and/or Solidworks preferred
  • FEA software experience; Ansys, NASTRAN, and/or Inventor preferred
  • Machining and fabrication experience (milling, turning, welding, laser-cutting, forming, etc.)
  • Basic experience with instrumentation (proximity sensors, vision sensors, strain gauges, scales, etc.)
  • Knowledge and experience of pressure vessels, mechanisms, and high heat flux design.

Adjacent Industries
  • Aerospace & Defense Mechanical Design
  • Factory Automation (material handling, web handling, process automation, etc.)
  • Fluid Power (Hydraulics/Pnumatics)

Essential Functions
Unusual or Special Physical Requirements of Position
  • Must be able to sit at a desk for long periods of time (90%)
  • Must be able to work at a computer for long periods of time (90%)
  • Special clothing/equipment and other PPE may be required during site visits (1%)
  • Must be able to lift 50 lbs

Description of Work Environment
  • Work will mainly be performed in an inside office environment (90%)
  • Field work may be required including outside work (15%)
  • Travel may be required to perform field work at project sites or to attend customer meetings - 1-3 days per quarter

Office Environment
  • Office equipment/machines
  • During travel to project sites handheld equipment such as tape measures, cameras, etc (10%)
  • Office equipment (Computers, fax, telephones, copiers etc.) 90 %

Criticality of Attendance
  • Regular attendance is mandatory Monday thru Thursday 7:30 am to 5:15 pm & Friday 7:30 to 11:30 am (100%).
  • Occasional overtime may be required to meet demanding project schedules

Other Essential Functions
  • Must take and pass a pre-employment drug and background test.

Compensation Details:
$76,000 $91,500
The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.
Benefits Overview:
Our health and welfare benefits are designed to support you and your priorities. Offerings include:
  • Health, dental, and vision insurance
  • Paid time off and holidays
  • Retirement benefits (including 401(k) matching)
  • Educational reimbursement
  • Parental leave
  • Employee stock purchase plan
  • Tax-saving options
  • Disability and life insurance
  • Pet insurance

Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.
Original Posting:
08/12/2026 - Until Filled
Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Apply