2

Entry Level Analog Layout Design Engineer Jobs in Fresno, CA

Assists engineers in design and development of test procedures for new products and recommends ... Utilizes schematic diagrams to isolate failures on Analog and Digital circuitry. Requires a strong ...

Assists engineers in design and development of test procedures for new products and recommends ... Utilizes schematic diagrams to isolate failures on Analog and Digital circuitry. Requires a strong ...

Designer 3

Del Rey, CA · On-site

$36/hr

Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group ... They possess a strong understanding of electrical system layout principles, including equipment ...

Assembler

Del Rey, CA · On-site

$24/hr

Layout Training. * Right-To-Know Training. * Moisture Sensitive Devices. * IPC-A-610 & J-STD-001 ... Provide feedback to engineers on design-for-manufacturing improvements and component placement.

Welder

Hanford, CA · On-site

$20 - $26/hr

... engineering drawings. * Lay out dimensions on metal stock, including sheet metal and angle iron ... Read and interpret blueprints and set up layouts accurately to meet design requirements and quality ...

Showing results 21-31

Entry Level Analog Layout Design Engineer information

See Fresno, CA salary details

$76.5K

$184.9K

$201.6K

How much do entry level analog layout design engineer jobs pay per year?

As of Sep 3, 2026, the average yearly pay for entry level analog layout design engineer in Fresno, CA is $184,918.00, according to ZipRecruiter salary data. Most workers in this role earn between $200,600.00 and $200,600.00 per year, depending on experience, location, and employer.

What does an entry level analog layout design engineer do?

An Entry Level Analog Layout Design Engineer is responsible for creating the physical layout of analog integrated circuits (ICs) based on circuit schematics provided by design engineers. This role involves using specialized software tools to place and route transistors, resistors, capacitors, and other components while ensuring optimal performance, manufacturability, and reliability. The engineer collaborates closely with design and fabrication teams to meet electrical and physical constraints, check for design rule violations, and prepare layouts for tape-out and production. Attention to detail and a strong understanding of semiconductor fabrication processes are essential for success in this position.

What are the key skills and qualifications needed to thrive as an entry level analog layout design engineer, and why are they important?

To thrive as an Entry Level Analog Layout Design Engineer, you need a solid understanding of analog circuit fundamentals, semiconductor physics, and a bachelor's degree in electrical engineering or a related field. Familiarity with industry-standard EDA tools like Cadence Virtuoso, along with knowledge of DRC/LVS verification processes, is typically required. Attention to detail, problem-solving abilities, and strong teamwork and communication skills help individuals excel in this role. These competencies ensure precise and efficient circuit layouts, minimize errors, and support successful collaboration in complex chip design projects.

What are some common challenges faced by entry level analog layout design engineers, and how can they be overcome?

Entry Level Analog Layout Design Engineers often encounter challenges such as understanding complex circuit schematics, meeting stringent design constraints (like matching, parasitics, and area optimization), and adhering to foundry-specific layout rules. Collaborating closely with senior engineers and participating in design reviews can help new engineers learn best practices and avoid common pitfalls. Utilizing available design automation tools and continuously seeking feedback on their layouts are also effective strategies for overcoming these challenges and accelerating professional growth.

What is the difference between Entry Level Analog Layout Design Engineer vs Analog IC Design Engineer?

AspectEntry Level Analog Layout Design EngineerAnalog IC Design Engineer
CredentialsBachelor's in Electrical Engineering or related fieldBachelor's or Master's in Electrical Engineering or related field
Work EnvironmentDesign teams, semiconductor companies, R&D labsDesign teams, semiconductor companies, R&D labs
ResponsibilitiesCreating physical layouts of analog circuits, ensuring manufacturabilityDesigning, simulating, and verifying analog circuits at the schematic level

While both roles involve working with analog circuits, the Entry Level Analog Layout Design Engineer focuses on translating circuit schematics into physical layouts, whereas the Analog IC Design Engineer is involved in the overall circuit design and simulation process. The layout engineer specializes in physical implementation, while the IC design engineer handles the conceptual and functional aspects of analog circuits.

What cities near Fresno, CA are hiring for Entry Level Analog Layout Design Engineer jobs?

Cities near Fresno, CA with the most Entry Level Analog Layout Design Engineer job openings:

Infographic showing various Entry Level Analog Layout Design Engineer job openings in Fresno, CA as of August 2026, with employment types broken down into 86% Full Time, 10% Part Time, and 4% Contract. Highlights an 84% Physical, 5% Hybrid, and 11% Remote job distribution, with an average salary of $184,918 per year, or $88.9 per hour.

Air Conditioning Instructor (Part-Time) Fresno City College

State Center Community College District

Fresno, CA • On-site

$45.49 - $61.78/hr

Part-time

Re-posted 28 days ago


State Center Community College District rating

9.5

Company rating: 9.5 out of 10

Based on 5 frontline employees who took The Breakroom Quiz

6th of 628 rated colleges and universities


Job description

Announcement Information
Posting Number Title Air Conditioning Instructor (Part-Time) Fresno City College Campus Location Fresno City College Start Date Essential Functions of Position

The ideal candidate will share Fresno City College's commitment to educating its racially and socioeconomically diverse student population. We currently enroll over 24,000 students of which 56% are Latinx, 10% are Asian/Pacific Islander, 5% are African American, 23% are White, 1% are American Indian/Alaska Native, and 6% are multiracial. FCC is a Hispanic-Serving Institution, reflecting the great responsibility that the College has to the educational attainment and economic well-being of the surrounding community. The successful candidate will join a department dedicated to the use of curriculum responsive to the student it serves.

Providing instruction in Air Conditioning, on the Fresno City College campus and/or at off-site community campus locations, the instructor will be responsible for:

  • Teaching subject areas in Heating, Ventilating, Air Conditioning, Refrigeration (HVAC/R) and Environmental Controls. Typical courses include instruction in:
    • Safety, hand tools, and use of instruments;
    • Basics of mechanical refrigeration; refrigerants, evacuation, charging, and recovery;
    • Basic and advanced electricity, single and 3 phase power, motors, controls, and control strategies;
    • Airflow measurement;
    • Use of psychrometrics as a diagnostic tool;
    • Gas fired (natural and LP) heating systems;
    • Flame control technologies;
    • Heat pumps;
    • Resistance heat;
    • Uniform Mechanical/Plumbing Code and National Electrical Code as related to HVAC/R;
    • Basic sheet metal fabrication;
    • Residential duct system layout and design;
    • Air conditioning and refrigeration system installation; and
    • Technician preparation for HVAC/R certification exams.
  • Communicating effectively with students and staff;
  • Participating in course and curriculum design;
  • Developing, constructing and coordinating the use of instructional aids;
  • Participating in appropriate professional meetings and workshops;
  • Participating in recruiting activities;
  • Duties may include assignments in a variety of instructional settings and times, including evening and/or weekends, on-line or off-campus, and large group instructions classes as needed; and
  • Otherwise fulfilling the duties and responsibilities of instructors as required by Administrative Regulation 7122.
Minimum Qualifications
  • A bachelor's degree AND two years of directly related professional experience;
    OR
  • An associate degree AND six years of directly related professional experience;
    OR
  • A valid California Community College credential;
    OR
  • The equivalent education and/or experience (requires an equivalency).

In addition, all applicants must have a valid California driver's license.

All candidates must have evidence of responsiveness to and understanding of the diverse academic, socioeconomic, cultural, disability, gender identity, sexual orientation, and ethnic backgrounds of community college students, as these factors relate to the need of equity-minded practices within the classroom.

Desirable Qualifications
  • Extent of teaching experience;
  • Extent of related work and professional experience;
  • Extent of training and practical experience in all aspects of HVAC/R and Environmental Controls;
  • Evidence of the ability to involve students in practical applications of instruction as it is related to the industry;
  • Extent of experience working with students of various ages, cultural, economic and education backgrounds;
  • Extent of knowledge and experience in the development and assessment of professional growth;
  • Ability to communicate clearly both orally and in writing;
  • Strong computer skills;
  • Membership in professional HVAC/R organizations;
  • The extent of additional licenses and/or certifications including: EPA Section 608, Type 1 & 2, California Licensed Contractor C20 and/or C38;
  • North American Technician Excellence (NATE) Certification in the following areas: Air Conditioning, Heat Pumps, Gas Furnace, Air Distribution;
  • Earned refrigeration Service Engineers Society (RSES) status by passing the: Certificate Member Exam (CM) and/or a Certificate Member Specialist Exam(s) (CMS);
  • Refrigerating Engineers & Technicians Association (RETA); Certified Assistant Refrigeration Operator (CARO) and/or Certified Industrial Refrigeration Operator (CIRO);
  • To a lesser extent, Air Conditioning, Heating, and Refrigeration Institute (ARI) Industry Competency Exam (ICE) and/or ESCO entry-level technician examinations passed;
  • Recent experience working with African American, Latinx, Native American, and other racially minoritized students in the classroom and an understanding of how historical patterns of exclusions of these groups in higher education shape patterns of participation and outcomes;
  • Willingness to examine and remediate one's instructional, relational, and classroom practices to more effectively engage and support racially minoritized students;
  • Experience and skill with addressing issues of equity in the classroom;
  • Potential for contribution to institutional vitality and growth; and
  • Knowledge of the community college and its missions and goals.
Salary and Benefits

Starting rates are $45.49 - $61.78 for lecture, $38.67 - $52.55 for lab, and $38.30 - $52.05 for non-instructional. Sick leave accrual is based on assignment hours.

Selection Procedure

The selection and hiring process will be explained by the hiring department if the candidate is extended an opportunity to interview.

Additional Information Additional Information about the Position

NOTE: Fresno City College's current equivalency policy reads as follows:

  • 10 years of verifiable journeyman level experience;
    AND
  • EPA section 608 Type 1 & 2
    • Type 1 System charge of 5 pounds of refrigerant or less
    • Type 2 System charge greater than 5 pounds of refrigerant

    AND

  • North American Technician Excellence (NATE) Certification in a minimum of two of the following areas:
    • Air Conditioning
    • Heat Pumps
    • Gas Furnace
    • Air Distribution

    Or as a substitution to the NATE certification, have an earned Refrigeration Service Engineers Society (RSES) status by passing the Certificate Member Exam (CM) and/or a Certificate Member Specialist Exam(s) (CMS)

FCC Institutional Research Site

Open Date 12/21/2017 Close Date Closing Time Open Until Filled Yes Quick Link https://scccd.peopleadmin.com/postings/1905

What State Center Community College District employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom