ZipRecruiter

Log In

2

Entry Level 3Rd Class Marine Engineer Jobs (NOW HIRING)

Curtiss-Wright

Inspector 3rd Class

East Farmingdale, NY · On-site

$33.03/hr

Inspector 3rd Class We are looking for an Inspector 3rd Class to join our Target Rock team! You ... Engineering drawing and specification interpretation and the ability to apply these standards in ...

Melwood

ENGINEER

Beltsville, MD

$37.87/hr

Melwood & Eggleston Enterprises, LLC has an immediate need for a DC 3rd Class Engineer at the Carver Center. Melwood & Eggleston Enterprises, LLC offers an experienced single-source solution for ...

Melwood

ENGINEER

Washington, DC

Melwood has an immediate need for a DC 3rd Class Engineer in Washington, DC. Responsible for the safe and efficient operation and maintenance during his/her watch of all equipment in his/her plant.

Curtisswright

Inspector 3rd Class

East Farmingdale, NY

$33.03/hr

Inspector 3rd Class We are looking for an Inspector 3rd Classto join our Target Rock team! You will ... Engineering drawing and specification interpretation and the ability to apply these standards in ...

Tt

Marine Vice President

New York, NY

$155K - $200K/yr

You will be supported by a multidisciplinary team ranging from entry-level engineers to senior ... third-party recruiters. When in doubt, please contact us through our web form here and see how you ...

Lake County

Marine Unit Deputy

Waukegan, IL

$25/hr

Completion of a swim test (3rd class - Navy). Completion of a County-sponsored physical, to include ... Supplemental Information Must work at least 6 shifts per month during the Marine Unit Season. This ...

next page

Showing results 1-20

All JobsEntry Level 3Rd Class Marine Engineer Jobs

Entry Level 3Rd Class Marine Engineer information

See salary details

$30K

$69.4K

$118K

How much do entry level 3rd class marine engineer jobs pay per year?

As of Jun 10, 2026, the average yearly pay for entry level 3rd class marine engineer in the United States is $69,362.00, according to ZipRecruiter salary data. Most workers in this role earn between $51,500.00 and $78,500.00 per year, depending on experience, location, and employer.
What are the most commonly searched types of 3Rd Class Marine Engineer jobs? The most popular types of 3Rd Class Marine Engineer jobs are:
Entry Level 3Rd Class Marine Engineer jobs near you
Inspector 3rd Class

Inspector 3rd Class

Curtiss-Wright

East Farmingdale, NY

$33.03/hr

Full-time

Medical, Retirement, PTO

Posted 5 days ago

Curtiss-Wright rating

8.4

Company rating: 8.4 out of 10

Based on 34 frontline employees who took The Breakroom Quiz

71st of 417 rated machine equipment manufacturers

Job description

Inspector 3rd Class
We are looking for an Inspector 3rd Class to join our Target Rock team!
You will inspect raw materials, in-process machined and finished-machined parts for compliance with engineering drawings and/or company specification before they are assembled into a finished product. Inspection is performed on in-process machined parts, on a first piece of a new set-up to qualify both the set-up and the process, on forged or casted pieces to qualify both dies and process. The individual is responsible to determine both the quality and conformance levels of machined parts. Qualified Inspectors shall be able to perform Inspection by CMM or conventional method.
Location: East Farmingdale, NY
hourly rate: $33.03
Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer.
We Take Care of Our People
Paid Time Off I 401K Match I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture *
Your Challenge
  • Engineering drawing and specification interpretation and the ability to apply these standards in the process of inspection.
  • Determine inspection procedures to ensure complete verification of specification and dimensions.
  • Capable to calibrate and/or verify accuracy of basic inspection tools (thread-gauges, micrometers, functional gauges, etc.) Inspector shall be independently able to select the appropriate measuring tools to inspect parts for compliance with specifications.
  • Evaluate and provide salvage possibilities of items outside specification limits and recommendation for reworking if applicable.
  • Assist with training other inspectors to preform calibration, use optical comparator, hardness testers and other inspection tools.
  • Complete required company paperwork, as applicable, to fully process a job (C1 documentation, Method 1 and Method 2, Commercial Grade, Inspection records, and Inspection reports, others as applicable)
  • Pass First Class Dimensional Inspection Test
  • Additional responsibilities as assigned by Supervisor.

What You Bring
  • Refer to the applicable Department Skills Matrix for Job Qualifications / Requirements
  • Expert knowledge of engineering blueprint and specification reading IAW ASME Y14.5 standard
  • Extensive knowledge of measuring tools.
  • Able to measure thread features using system 21 or 22.
  • Able to interpret and measuring geometric features per ANSI-Y 14.5.
  • Able to calibrate and set thread gauges including Johnson Thread gauges, optical projector, etc.
  • Visual inspection ability must past visual acuity test giving by Target Rock
  • Sufficient manual dexterity to handle and manipulate delicate parts and measuring instruments.
  • Able to verify material hardness and detection of material cracks, pinholes, or other defects.
  • Able to verify material traceability and accountability by viewing approved material certification.
  • Able to lift a weight of 40 lbs. maximum if required for inspection purpose (parts handling).
  • Must possess the mental capacity to comprehend information provided daily and make own decisions.
  • Must be a US citizen

EDUCATION / TRAINING:
  • High school or trade school graduate (minimum).

No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright.
Compliance Statement
This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn.
Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition.
For US Applicants: EEO is The Law - click here for more information.
If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

What Curtiss-Wright employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Curtiss-Wright logo

About Curtiss-Wright

Sourced by ZipRecruiter

Curtiss-Wright Actuation Division designs, manufactures and supports electro-mechanical actuation products and systems for use in demanding applications in Aerospace, Defense and Industrial Automation markets. Our market leading solutions help improve the reliability, efficiency and performance of our customers' operations and platforms, as well as reducing their environmental impact with energy efficient electro-mechanical designs and technology. For the Aerospace market, we supply actuation systems for flight control, landing gear, utility and other applications on both commercial and military aircraft. In Ground & Naval Defense markets, we support a wide array of applications ranging from door assist, ramp and hatch actuation, weapons handling systems, radar and launch platform actuation, and robotic (AUV/ROV) actuation. In Industrial Automation, our Exlar® actuators are globally recognized as a leading brand offering high power density, precision and reliability for machine/process applications in automotive, food & beverage, oil & gas, robotics, entertainment and many other industries.

Industry

Computer and electronic product manufacturing

Company size

5,001 - 10,000 Employees

Headquarters location

Davidson, NC, US

Year founded

1929

Social media

FacebookTwitter

View All Curtiss-Wright Jobs

Apply