ZipRecruiter

Log In

1

Embedded Hardware Developer Jobs in Florida (NOW HIRING)

XTEND

Embedded Software Engineer

Tampa, FL · On-site

$124K - $163K/yr

The engineer will work closely with electrical, mechanical, software, and production teams to ... Hardware / Software Integration * Work directly with hardware components, embedded processors, co ...

Actalent

Principal Hardware Engineer

Melbourne, FL · On-site

$114K - $150K/yr

Principal Hardware Engineer This Principal Hardware Engineer role sits within a highly technical ... Lead the design and development of complex digital hardware platforms for embedded computing and ...

AERONIX INC

Embedded Software Engineer

Melbourne, FL · On-site

$90K - $125K/yr

Embedded Software Engineer - Job Title: Software Engineer Department: Engineering Reports To ... Collaborate closely with hardware engineers to ensure seamless integration with custom electronic ...

CesiumAstro

Senior Embedded Software Engineer I

Melbourne, FL · On-site

$114K - $150K/yr

Cesium's goal is to create an out-of-the-box hardware and software experience which enhances our ... Programming experience in C or C++. * Experience in embedded systems design with preemptive ...

CesiumAstro

Senior Embedded Software Engineer I

Melbourne, FL · On-site

$114K - $150K/yr

Cesium's goal is to create an out-of-the-box hardware and software experience which enhances our ... Programming experience in C or C++. * Experience in embedded systems design with preemptive ...

CesiumAstro

Senior Embedded Software Engineer I

Melbourne, FL · On-site

$114K - $150K/yr

Cesium's goal is to create an out-of-the-box hardware and software experience which enhances our ... Programming experience in C or C++. * Experience in embedded systems design with preemptive ...

next page

Showing results 1-20

All JobsEmbedded Hardware Developer JobsEmbedded Hardware Developer Jobs in Florida

Embedded Hardware Developer information

What is the difference between Embedded Hardware Developer vs Embedded Systems Engineer?

AspectEmbedded Hardware DeveloperEmbedded Systems Engineer
Primary FocusDesign and development of hardware components for embedded systemsDesign and integration of both hardware and software for embedded systems
Required SkillsHardware design, PCB layout, circuit analysisHardware knowledge plus software programming, RTOS, firmware
Work EnvironmentHardware labs, prototyping, testing hardwareMultidisciplinary teams, hardware and software integration
Common CertificationsASIC/FPGA design, PCB certificationEmbedded systems certifications, RTOS training

While both roles work closely in embedded systems development, Embedded Hardware Developers focus primarily on hardware design and testing, whereas Embedded Systems Engineers handle both hardware and software integration. The roles often overlap, but their core responsibilities differ in scope and expertise.

What cities in Florida are hiring for Embedded Hardware Developer jobs?

Cities in Florida with the most Embedded Hardware Developer job openings:

Embedded Hardware Developer jobs near you

Embedded Hardware Engineer - Electro-Optical Systems

Sarasota, FL

Acron Aviation
See more jobs at Acron Aviationexternal

Full-time

Posted 18 days ago

Job description

About Trakka Systems
Trakka Systems is a global leader in the design, development, and manufacture of mission-critical vision, surveillance, and situational awareness solutions for airborne, maritime, and land-based operations. For more than 25 years, Trakka has delivered innovative technologies including advanced gyro-stabilized imaging systems, EO/IR sensor platforms, high-intensity searchlights, mission management and mapping software, counter-UAS solutions, and integrated surveillance systems that support defense, law enforcement, border security, search and rescue, utility, and special mission operators around the world. Trakka Systems is a member of the Acron Technologies platform of specialized companies that innovate to create safer skies and protect lives.

Job Title
Embedded Hardware Engineer – Electro-Optical Systems

Position Summary
We are seeking a hands-on Embedded Hardware Engineer to design, develop, and debug the electronics within advanced airborne, land, and maritime electro-optical systems.

This is a highly technical, bench-focused engineering role where you will own hardware development from concept through schematic capture, PCB layout, bring-up, integration, qualification, and production support. The position includes development of electronics supporting real-time video processing, motor control and stabilization, communications interfaces, and power regulation systems.

In addition to new product development, you will serve as a hardware escalation resource for manufacturing and field service teams, supporting root cause investigations, corrective actions, and continuous product improvement initiatives.
Hardware Design & Development
  • Own board-level hardware design activities from requirements through release, including architecture development, component selection, schematic capture, and PCB layout
  • Design circuitry supporting real-time video processing, motor control and stabilization, serial communications, and DC/DC power regulation and distribution
  • Apply disciplined high-speed digital, mixed-signal, and power design methodologies
  • Design for EMI/EMC compliance, thermal performance, reliability, and environmental robustness
  • Integrate and support microcontrollers, FPGAs, and supporting digital architectures
  • Develop and maintain engineering documentation, including schematics, bills of material, fabrication drawings, interface control documents, and test procedures
Bring-Up, Debug & Validation
  • Perform first-article board bring-up and hardware characterization activities
  • Troubleshoot hardware faults at the component, circuit, and system level
  • Utilize oscilloscopes, spectrum analyzers, logic analyzers, DMMs, power supplies, thermal imaging equipment, and other diagnostic tools
  • Validate interfaces including SPI, I²C, UART, RS-232, RS-422, RS-485, Ethernet, CAN, USB, HDMI, SDI, LVDS, and related technologies
  • Execute design verification activities and support EMI/EMC and environmental qualification testing
  • Drive corrective actions and design improvements based on qualification and test results
Production & Field Support
  • Support manufacturing and service teams with troubleshooting, yield improvement, and technical issue resolution
  • Develop test fixtures, functional test procedures, troubleshooting guides, and production support documentation
  • Conduct failure analysis activities on returned and fielded products
  • Support engineering change implementation and continuous improvement efforts
  • Apply Design for Manufacturability (DFM), Design for Testability (DFT), and Design for Serviceability (DFS) principles
  • Provide occasional customer, supplier, and field support
Required Qualifications
  • Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related technical discipline
  • 5+ years of hands-on embedded hardware design experience supporting production hardware
  • Experience with schematic capture, PCB layout, hardware integration, and production support
  • Practical experience with embedded digital interfaces including SPI, I²C, UART, RS-232, RS-422, and Ethernet
  • Experience supporting high-speed video, high-speed serial, or related interface technologies
  • Experience working with microcontrollers and FPGA-based systems
  • Strong understanding of power electronics, DC/DC conversion, regulation, sequencing, and protection circuits
  • Strong analytical, troubleshooting, and technical communication skills
  • Must qualify as a U.S. Person under ITAR/EAR regulations
Preferred Additional Skills
  • Experience with Altium Designer
  • Experience with brushless motor control and stabilization systems
  • Experience supporting gyros, encoders, IMUs, or related sensor technologies
  • Experience with EO/IR imaging systems and video electronics
  • Exposure to FPGA development, VHDL, or Verilog environments
  • Embedded firmware development experience in C
  • Familiarity with aerospace, defense, or environmental qualification standards such as DO-160, MIL-STD-810, or MIL-STD-461.
  • Experience supporting airborne, maritime, defense, public safety, or surveillance systems
  • Experience with structured root cause analysis and continuous improvement methodologies
Trakka Systems is a member of the Acron Technologies platform of specialized companies that innovate to create safer skies and protect lives.

Equal Opportunity Statement
Acron Aviation is proud to be an Affirmative Action and Equal Opportunity Employer. We are committed to treating all employees and applicants with respect and dignity and to maintaining a workplace free from unlawful discrimination. All applicants will be considered for employment regardless of race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding, or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or any other legally protected characteristic.

Additional Information:
Acron Aviation maintains a drug-free workplace and conducts pre-employment substance abuse testing and background checks, where allowed by law. Acron Aviation is an E-Verify employer.

We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.