ZipRecruiter

Log In

1

Electrical Instrumentation Jobs in Monroe, LA (NOW HIRING)

Energy Transfer Equity Lp

I&E Technician

Bastrop, LA · On-site

State Electrical License * Associates Degree in Instrumentation * Related software and system certifications (i.e. Factory Talk, Delta V, etc.) Working Conditions and Requirements: The work ...

New

Energy transfer

I&E Technician

Bastrop, LA · On-site

State Electrical License * Associates Degree in Instrumentation * Related software and system certifications (i.e. Factory Talk, Delta V, etc.) Working Conditions and Requirements: The work ...

New

Ingersoll-Rand

Electrical Engineer

Monroe, LA · On-site

$75 - $105/hr

Troubleshootand improve electrical test equipment, instrumentation, sensors, controls, drives, and data collection systems to maximize uptime and test accuracy. * Support pressure, temperature, flow ...

ISC Constructors

Electrician

Rayville, LA · On-site

$25.25 - $32.75/hr

For over 35 years, ISC has provided safe, high quality electrical, instrumentation and controls solutions to global leading industrial manufacturers. With offices in Baton Rouge, Beaumont, Houston ...

ISC Constructors

Apprentice

Rayville, LA · On-site

For over 35 years, ISC has provided safe, high quality electrical, instrumentation and controls solutions to global leading industrial manufacturers. With offices in Baton Rouge, Beaumont, Houston ...

Meta

Electrical Subject Matter Expert

Rayville, LA · On-site

$114K/yr

Meta is seeking a data center Electrical Subject Matter Expert (SME) to join our Data Center ... Instrumentation & control, power system protection, power automation, etc. experience * Trade ...

Meta

Electrical Subject Matter Expert

Rayville, LA

$143K/yr

Meta is seeking an Electrical Subject Matter Expert to support the design, operation, and ... Instrumentation & control, power system protection, power automation, etc. experience * Experience ...

Meta

Electrical Subject Matter Expert

Rayville, LA · On-site

$143K - $198K/yr

Meta is seeking an Electrical Subject Matter Expert to support the design, operation, and ... Instrumentation & control, power system protection, power automation, etc. experience • ...

Bwpipelines

E&I Specialist/ Sr E&I Specialist

Monroe, LA · On-site

$85 - $100/hr

Key responsibilities include safely installing instrumentation and electrical components; troubleshooting and maintaining control systems, instrumentation, and electrical power systems up to 4,160 ...

Kiewit Corporation

Field Engineer - Electrical

Monroe, LA · On-site

$60K - $79K/yr

Coordinate electrical work activities with other disciplines including civil, structural, mechanical, and instrumentation teams. * Support commissioning, testing, energization, and startup activities.

Entergy

Production Technician

Holly Ridge, LA · On-site

$13.25 - $16.50/hr

Perform mechanical work involved in inspection, repair and installation of instrumentation and electrical equipment, and light PM of mechanical systems. Minimum Requirements * High school diploma or ...

HGA

Construction Project Team

Monroe, LA · On-site

$66K - $85K/yr

... Electrical Engineer • Civil Engineer • Instrumentation & Controls Engineer • Piping Designer • Project Controls Manager • Planner/Scheduler • Document Controller • Cost Engineer • ...

Entergy

Sr, Tech Training Specialist

West Monroe, LA · On-site

Oversee, schedule, deliver, teach and/or facilitate multi skilled training courses, including control room simulator training on CCCT, Operating fundamentals of CCCT, Instrumentation, Electrical, and ...

Entergy

Sr, Tech Training Specialist

West Monroe, LA · On-site

Oversee, schedule, deliver, teach and/or facilitate multi skilled training courses, including control room simulator training on CCCT, Operating fundamentals of CCCT, Instrumentation, Electrical, and ...

All JobsElectrical Instrumentation JobsElectrical Instrumentation Jobs in Monroe, LA

Electrical Instrumentation information

See Monroe, LA salary details

$19

$36

$51

How much do electrical instrumentation jobs pay per hour?

As of Aug 28, 2026, the average hourly pay for electrical instrumentation in Monroe, LA is $36.06, according to ZipRecruiter salary data. Most workers in this role earn between $29.81 and $41.63 per hour, depending on experience, location, and employer.

What is electrical instrumentation?

Electrical instrumentation refers to the science and technology of measuring, monitoring, and controlling electrical quantities and processes within industrial and commercial settings. Professionals in this field work with devices such as sensors, transducers, meters, and control systems to ensure that equipment and processes run efficiently and safely. Their work is critical in industries like manufacturing, energy, oil and gas, and automation, where precise measurement and control of electrical parameters are essential. Electrical instrumentation technicians and engineers often install, calibrate, troubleshoot, and maintain these instruments.

What are the key skills and qualifications needed to thrive as an electrical instrumentation technician?

To thrive as an Electrical Instrumentation Technician, you need a solid background in electrical systems, instrumentation principles, and troubleshooting, usually supported by a relevant technical diploma or certification. Familiarity with PLCs, SCADA systems, loop calibration tools, and industry-specific safety certifications is commonly required. Attention to detail, analytical thinking, and effective communication are crucial soft skills for diagnosing issues and collaborating with maintenance teams. These skills are vital to ensure the safe, accurate, and efficient operation of automated industrial processes.

How does an electrical instrumentation professional typically collaborate with other departments during large-scale projects?

Electrical Instrumentation professionals frequently work alongside engineering, operations, and maintenance teams to ensure that instrumentation systems are correctly designed, installed, and functioning. They participate in cross-departmental meetings to discuss project requirements, troubleshoot issues, and integrate instrumentation with broader plant systems. Effective communication and teamwork are key, as these professionals often rely on input from process engineers and technicians to calibrate instruments and implement control strategies that meet project goals and safety standards.

What is the difference between Electrical Instrumentation vs Electrical Technicians?

AspectElectrical InstrumentationElectrical Technicians
CertificationsTypically requires certifications in instrumentation and control systemsOften requires electrical trade certifications or licenses
Work EnvironmentIndustrial plants, manufacturing facilities, process industriesConstruction sites, maintenance, electrical installation environments
Job FocusInstallation, calibration, and maintenance of control and instrumentation systemsElectrical wiring, troubleshooting, and repair of electrical systems

Electrical Instrumentation specialists focus on control systems and instrumentation devices used in industrial processes, while Electrical Technicians handle general electrical wiring, repairs, and installations. Both roles require electrical knowledge but differ in their specific applications and environments.

Is instrumentation in high demand?

Electrical instrumentation is in high demand across industries such as manufacturing, energy, and automation due to the need for precise control and measurement systems. Skilled technicians with knowledge of control systems, calibration, and instrumentation tools are often sought after, especially in facilities with ongoing maintenance and upgrades.

What does electrical instrumentation do?

Electrical instrumentation involves designing, installing, maintaining, and troubleshooting instruments and control systems used to measure and control electrical parameters such as voltage, current, and resistance. Professionals in this field work with sensors, transducers, and control devices to ensure accurate data collection and system operation in industrial environments. Knowledge of electrical codes, calibration, and safety procedures is essential for this role.

Where do electrical instrumentation technicians make the most money?

Electrical instrumentation technicians tend to earn higher salaries in industries such as oil and gas, petrochemical, and power generation, especially when working in remote or high-demand locations. Experience, certifications, and working overtime or on rotating shifts can also increase earning potential. Salaries vary by region, with some areas offering higher pay due to cost of living and industry demand.

What are the most commonly searched types of Electrical Instrumentation jobs in Monroe, LA?

The most popular types of Electrical Instrumentation jobs in Monroe, LA are:

What are popular job titles related to Electrical Instrumentation jobs in Monroe, LA?

For Electrical Instrumentation jobs in Monroe, LA, the most frequently searched job titles are:

What job categories do people searching Electrical Instrumentation jobs in Monroe, LA look for?

The top searched job categories for Electrical Instrumentation jobs in Monroe, LA are:

What cities near Monroe, LA are hiring for Electrical Instrumentation jobs?

Cities near Monroe, LA with the most Electrical Instrumentation job openings:

Electrical Instrumentation jobs near you
Infographic showing various Electrical Instrumentation job openings in Monroe, LA as of August 2026, with employment types broken down into 90% Full Time, and 10% Contract. Highlights an 100% In-person job distribution, with an average salary of $75,005 per year, or $36.1 per hour.

I&E Technician

Energy Transfer Equity Lp

Bastrop, LA • On-site

Full-time

Posted 2 days ago

New

Energy Transfer rating

9.1

Company rating: 9.1 out of 10

Based on 66 frontline employees who took The Breakroom Quiz

2nd of 87 rated oil and gas companies

Job description

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy.  We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, American Heart Association, Ronald McDonald House and many more.  Come join our award winning 10,000 strong organization as we fuel the world and each other!
 
Summary: 
 

This position provides instrument and electrical technical support to construction, plant facilities and field operations.  The position will repair, install, troubleshoot, and perform predictive and preventative maintenance tasks on control systems, natural gas compression or pump stations, SCADA, and other equipment contained within gas and liquid facilities and pipelines. Additionally, this position will inspect, troubleshoot, and maintain process control systems such as PLCs or DCS and other similar equipment.

 

Essential Duties and Responsibilities:
To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: 

  • Install, diagnose, and maintain SCADA systems, plant, pipeline, and compressor instrument and electrical equipment components with all job duties and responsibilities executed in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements.
  • Install, diagnose, and maintain pneumatic and intelligent instruments, electrical distribution systems, motor control gear, and associated equipment software
  • Install, diagnose, and maintain PLC's or DCS systems & process or safety controls
  • Read and interpret manuals, policy, engineering standards, regulations, drawings, and schematics, including electrical, pneumatic, and P&ID's
  • Test, calibrate, and document plant and compressor station control and safety devices per DOT 192, DOT 193, DOT 195 or applicable PSM 1910 requirements and ensure frequencies of required preventative maintenance task are kept current
  • Participate in call out/on call requirements
  • Actively participate in partnership safety programs and initiatives
  • Perform specialized technical skills (i.e. develops complex design projects, cost estimates, evaluates electrical systems, build and maintain ESD systems, maintain gas turbine or skid unit control systems)
  • Provide work direction, oversight, and inspect other work provided by third party contractors
  • Provide mentoring and oversight to less qualified employees
  • Provide accurate written and electronic reporting
  • Comply with partnership safety policies and procedures
  • Perform energy isolation lockout/tagout procedures (LOTO)
Required Education:
  • High school diploma or GED
Required experience is commensurate with the selected job level:
  • Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience
  • Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience
  • Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience
Required Qualifications:
  • Valid driver's license with demonstrated safe driving record
  • Ability to maintain motor controls, relay logic, RTU's, I&E associated end-devices
  • Proficiency with MS Office Suite including Outlook and Word
  • Experience using software to troubleshoot, design, or configure control solutions specific to In Touch Wonderware or Factory Talk, Allen Bradley RSLogix, or Delta V
  • Extensive knowledge of DOT 192  DOT 193, and DOT 195, as it pertains to required testing and documentation for plants, compressor stations, pipelines, and/or facilities as required
  • Demonstrated understanding of the National Electric Code and OSHA 1910 as it relates to electrical systems
Preferred Qualifications:
  • State Electrical License
  • Associates Degree in Instrumentation
  • Related software and system certifications (i.e. Factory Talk, Delta V, etc.)
Working Conditions and Requirements:
 

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

  1. Frequent exposure to heat, cold, and other adverse weather conditions
  2. Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet.  Occasionally lifting up to 50 lbs with or without assistance
  3. Working conditions may include confined spaces
  4. Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays
  5. Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment
  6. Reliable attendance at work
  7. Occasional overnight travel may be required
 

DISCLAIMER: 

The above statements, which are subject to change, are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

 

What Energy Transfer employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply