1

Electrical Engineer Jobs in Springfield, IL (NOW HIRING)

Read and interpret manuals, policy, engineering standards, regulations, drawings, and schematics, including electrical, pneumatic, and P&ID's * Test, calibrate, and document plant and compressor ...

Structural Engineer

Springfield, IL · On-site +1

$85.28K - $109.19K/yr

Our collaborative, multidisciplinary group spanning architectural, structural, civil, electrical, mechanical, process engineering, pipeline design, and integrity management works together to deliver ...

Structural Engineer

Springfield, IL · On-site

$85.28K - $109.19K/yr

Our collaborative, multidisciplinary group spanning architectural, structural, civil, electrical, mechanical, process engineering, pipeline design, and integrity management works together to deliver ...

Structural Engineer

Springfield, IL · On-site +1

$85.28K - $109.19K/yr

Our collaborative, multidisciplinary group spanning architectural, structural, civil, electrical, mechanical, process engineering, pipeline design, and integrity management works together to deliver ...

You should have Associates degree in Electrical Engineering or an Electrical Engineering Technician or equivalent work experience. Additionally you should have experience with high voltage and power ...

next page

Showing results 1-20

Electrical Engineer information

See Springfield, IL salary details

$50.1K

$110.1K

$166.5K

How much do electrical engineer jobs pay per year?

As of May 28, 2026, the average yearly pay for electrical engineer in Springfield, IL is $110,103.00, according to ZipRecruiter salary data. Most workers in this role earn between $82,300.00 and $130,800.00 per year, depending on experience, location, and employer.

What Do Electrical Engineers Do?

Electrical engineers design, test, and fix devices relating to electricity, electronics, and electromagnetism. An electrical engineer builds virtually every tool in the world that produces, conducts, or operates by way of electricity. Electrical engineers handle the research, design, installation, and handover of new electrical equipment. They also run tests on new devices and solve problems on malfunctioning systems and components. Electrical engineers work with a wide range of electronic equipment, from tiny microchips to supercomputers up to massive power station generators. They have their hands on a myriad of electrical components during their work, including conductors, batteries, capacitors, coils, magnets, transistors, and switches.

What are the key skills and qualifications needed to thrive as an Electrical Engineer, and why are they important?

To thrive as an Electrical Engineer, you need a solid understanding of circuit design, electronics, mathematics, and physics, usually backed by a bachelor's degree in electrical engineering or a related field. Familiarity with CAD software, simulation tools like MATLAB or PSpice, and knowledge of relevant industry standards or certifications (such as a Professional Engineer license) are commonly expected. Strong problem-solving abilities, teamwork, and effective communication skills set outstanding engineers apart. These competencies are critical for designing safe, efficient electrical systems and collaborating effectively on complex engineering projects.

What are some common challenges Electrical Engineers face when working on multidisciplinary project teams?

Electrical Engineers often collaborate with professionals from mechanical, civil, and software engineering backgrounds. A common challenge is ensuring clear communication and alignment of technical specifications, as each discipline may have different priorities and terminologies. Successfully navigating these challenges requires strong teamwork, adaptability, and the ability to translate complex electrical concepts for diverse audiences. Building mutual understanding helps prevent project delays and ensures seamless integration of electrical systems with other components.

What does an Electrical Engineer do?

An Electrical Engineer designs, develops, tests, and supervises the manufacturing of electrical equipment, such as electric motors, radar and navigation systems, communications systems, and power generation equipment. They work in a variety of industries, including energy, manufacturing, telecommunications, and electronics. Their role often involves problem-solving, project management, and ensuring that systems comply with safety and quality standards. Electrical Engineers also collaborate with other engineers and professionals to bring projects from concept to completion.

What is the difference between Electrical Engineer vs Electrical Technician?

AspectElectrical EngineerElectrical Technician
Required CredentialsBachelor's degree in electrical engineering or related fieldAssociate degree or technical diploma in electrical technology
Work EnvironmentDesign, development, and testing of electrical systems, often in offices or labsInstallation, maintenance, and troubleshooting of electrical systems, often on-site
Employer & Industry UsageEngineering firms, manufacturing, power generation, and consultingConstruction, maintenance, and manufacturing industries

Electrical engineers focus on designing and developing electrical systems, requiring a bachelor's degree, while electrical technicians handle installation and maintenance, typically with technical diplomas. Both roles are essential in the electrical industry but differ in responsibilities and educational requirements.

What are the most commonly searched types of Electrical Engineer jobs in Springfield, IL? The most popular types of Electrical Engineer jobs in Springfield, IL are:
What are popular job titles related to Electrical Engineer jobs in Springfield, IL? For Electrical Engineer jobs in Springfield, IL, the most frequently searched job titles are:
What cities near Springfield, IL are hiring for Electrical Engineer jobs? Cities near Springfield, IL with the most Electrical Engineer job openings:
Infographic showing various Electrical Engineer job openings in Springfield, IL as of May 2026, with employment types broken down into 1% As Needed, 89% Full Time, 7% Part Time, and 3% Contract. Highlights an 94% Physical, 2% Hybrid, and 4% Remote job distribution, with an average salary of $110,103 per year, or $52.9 per hour.
I&E Technician

Full-time

Posted 21 days ago


Energy Transfer rating

9.1

Company rating: 9.1 out of 10

Based on 62 frontline employees who took The Breakroom Quiz

2nd of 74 rated oil and gas companies


Job description

Waverly, IL
Summary:
This position provides instrument and electrical technical support to construction, plant facilities and field operations. The position will repair, install, troubleshoot, and perform predictive and preventative maintenance tasks on control systems, natural gas compression or pump stations, SCADA, and other equipment contained within gas and liquid facilities and pipelines. Additionally, this position will inspect, troubleshoot, and maintain process control systems such as PLCs or DCS and other similar equipment.
Essential Duties and Responsibilities:
To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below:
  • Install, diagnose, and maintain SCADA systems, plant, pipeline, and compressor instrument and electrical equipment components with all job duties and responsibilities executed in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements.
  • Install, diagnose, and maintain pneumatic and intelligent instruments, electrical distribution systems, motor control gear, and associated equipment software
  • Install, diagnose, and maintain PLC's or DCS systems & process or safety controls
  • Read and interpret manuals, policy, engineering standards, regulations, drawings, and schematics, including electrical, pneumatic, and P&ID's
  • Test, calibrate, and document plant and compressor station control and safety devices per DOT 192, DOT 193, DOT 195 or applicable PSM 1910 requirements and ensure frequencies of required preventative maintenance task are kept current
  • Participate in call out/on call requirements
  • Actively participate in partnership safety programs and initiatives
  • Perform specialized technical skills (i.e. develops complex design projects, cost estimates, evaluates electrical systems, build and maintain ESD systems, maintain reciprocating engine unit control systems)
  • Provide work direction, oversight, and inspect other work provided by third party contractors
  • Provide mentoring and oversight to less qualified employees
  • Provide accurate written and electronic reporting
  • Comply with partnership safety policies and procedures
  • Perform energy isolation lockout/tagout procedures (LOTO)

Summary:
This position provides instrument and electrical technical support to construction, plant facilities and field operations. The position will repair, install, troubleshoot, and perform predictive and preventative maintenance tasks on control systems, natural gas compression or pump stations, SCADA, and other equipment contained within gas and liquid facilities and pipelines. Additionally, this position will inspect, troubleshoot, and maintain process control systems such as PLCs or DCS and other similar equipment.
Essential Duties and Responsibilities:
To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below:
  • Install, diagnose, and maintain SCADA systems, plant, pipeline, and compressor instrument and electrical equipment components with all job duties and responsibilities executed in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements.
  • Install, diagnose, and maintain pneumatic and intelligent instruments, electrical distribution systems, motor control gear, and associated equipment software
  • Install, diagnose, and maintain PLC's or DCS systems & process or safety controls
  • Read and interpret manuals, policy, engineering standards, regulations, drawings, and schematics, including electrical, pneumatic, and P&ID's
  • Test, calibrate, and document plant and compressor station control and safety devices per DOT 192, DOT 193, DOT 195 or applicable PSM 1910 requirements and ensure frequencies of required preventative maintenance task are kept current
  • Participate in call out/on call requirements
  • Actively participate in partnership safety programs and initiatives
  • Perform specialized technical skills (i.e. develops complex design projects, cost estimates, evaluates electrical systems, build and maintain ESD systems, maintain gas turbine or skid unit control systems)
  • Provide work direction, oversight, and inspect other work provided by third party contractors
  • Provide mentoring and oversight to less qualified employees
  • Provide accurate written and electronic reporting
  • Comply with partnership safety policies and procedures
  • Perform energy isolation lockout/tagout procedures (LOTO)

Required Education:
  • High school diploma or GED

Required experience is commensurate with the selected job level:
  • Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience
  • Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience
  • Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience

Required Qualifications:
  • Valid driver's license with demonstrated safe driving record
  • Ability to maintain motor controls, relay logic, PLC's, I&E associated end-devices
  • Proficiency with MS Office Suite including Outlook and Word
  • Experience using software to troubleshoot, design, or configure control solutions specific to Workshop, LOGO, VTScada, NI Lookout, CTI.
  • Extensive knowledge of DOT 192, DOT 193, and DOT 195, as it pertains to required testing and documentation for plants, compressor stations, pipelines, and/or facilities as required
  • Demonstrated understanding of the National Electric Code and OSHA 1910 as it relates to electrical systems

Preferred Qualifications:
  • State Electrical License
  • Associate's degree in Instrumentation
  • Related software and system certifications (i.e. VTScada, Workshop, LOGO, Lookout, etc.)

Working Conditions and Requirements:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
  1. Frequent exposure to heat, cold, and other adverse weather conditions
  2. Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting, up to 50 lbs. with or without assistance
  3. Working conditions may include confined spaces
  4. Subject to callouts to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays
  5. Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment
  6. Reliable attendance at work
  7. Occasional overnight travel may be required

What Energy Transfer employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom