ZipRecruiter

Log In

1

Director Rf Jobs in Orlando, FL (NOW HIRING)

Mtron

RF Technician I-V

Orlando, FL · On-site

All skills from RF Technician IV * Ability to direct others * Computer skills for AX transactions and other data entry requirements Education, Experience, & Training: RF Technician I: * Must be able ...

Mtron

RF Filter Design Engineer

Orlando, FL · On-site

RF Filter Design Engineer Department : Design Engineer Reports to ... Director of Engineering Job Class : Exempt (Salary) Pay Rate : Dependent upon experience Location:

MtronPTI

RF Filter Design Engineer

Orlando, FL · On-site

RF Filter Design Engineer Department : Design Engineer Reports to ... Director of Engineering Job Class : Exempt (Salary) Pay Rate : Dependent upon experience Location:

Raytheon

Senior RF Mechanical Engineer

Orlando, FL · On-site

$97K - $128K/yr

Familiarity or direct experience with RF Printed Circuit Board (PCB) material stack ups and Circuit Card Assembly (CCA) layout * One dimensional tolerance analysis for complex mechanical assemblies

Visium Resources, Inc.

PCB Design Engineer

Orlando, FL · Hybrid

This position is a direct hire opportunity which is expected to be on-site. Summary This PCB Design ... Address RF-specific challenges such as grounding strategies, shielding, and coupling mitigation.

Visium Resources, Inc.

PCB Design Engineer

Orlando, FL · Hybrid

This position is a direct hire opportunity which is expected to be on-site. Summary This PCB Design ... Address RF-specific challenges such as grounding strategies, shielding, and coupling mitigation.

Qorvo, Inc.

Staff Design Engineer

Apopka, FL · Hybrid

Experience with schematic design, RF and EM simulation, and design layout is preferred. * 3+ years direct experience in acoustic design (BAW or SAW) is preferred. * Knowledge of AWR-Microwave Office ...

Qorvo, Inc.

Staff Design Engineer

Apopka, FL · On-site

Experience with schematic design, RF and EM simulation, and design layout is preferred. * 3+ years direct experience in acoustic design (BAW or SAW) is preferred. * Knowledge of AWR-Microwave Office ...

next page

Showing results 1-20

All JobsRf JobsDirector Rf JobsDirector Rf Jobs in Orlando, FL

Director Rf information

See Orlando, FL salary details

$21.1K

$140.6K

$268.4K

How much do director rf jobs pay per year?

As of Sep 14, 2026, the average yearly pay for director rf in Orlando, FL is $140,579.00, according to ZipRecruiter salary data. Most workers in this role earn between $80,294.00 and $188,117.00 per year, depending on experience, location, and employer.

What is a Director RF?

A Director RF (Radio Frequency) is responsible for overseeing the design, implementation, and optimization of wireless networks. They lead teams of RF engineers to ensure high-performance network coverage, capacity, and quality. Their role involves strategic planning, spectrum management, and collaboration with vendors and regulatory bodies. Strong technical expertise and leadership skills are essential for success in this position.

What are the typical day-to-day responsibilities of a Director RF?

A Director RF typically oversees the design, implementation, and optimization of radio frequency systems, managing engineering teams to deliver projects on time and within budget. Daily tasks often include coordinating with product development, resolving technical challenges, approving design specifications, and ensuring compliance with regulatory and safety standards. The role also involves collaborating closely with other departments, such as product management, manufacturing, and quality assurance, to align engineering objectives with overall company goals. It is a dynamic position that balances technical oversight with strategic leadership and team development.

What are the key skills and qualifications needed to thrive in the Director RF position, and why are they important?

To thrive as a Director RF (Radio Frequency), you need deep technical expertise in RF engineering, wireless communication systems, and project management, typically supported by an engineering degree and significant industry experience. Proficiency with RF simulation tools (such as HFSS, CST, or ADS), spectrum analyzers, and familiarity with relevant certifications like FCC compliance is essential. Strong leadership, cross-functional communication, and problem-solving abilities distinguish top candidates. These competencies are crucial for leading teams, optimizing complex RF systems, and delivering robust wireless communication solutions.

What are the most commonly searched types of Rf jobs in Orlando, FL?

The most popular types of Rf jobs in Orlando, FL are:

What are popular job titles related to Director Rf jobs in Orlando, FL?

For Director Rf jobs in Orlando, FL, the most frequently searched job titles are:

What job categories do people searching Director Rf jobs in Orlando, FL look for?

The top searched job categories for Director Rf jobs in Orlando, FL are:

What cities near Orlando, FL are hiring for Director Rf jobs?

Cities near Orlando, FL with the most Director Rf job openings:

Director Rf jobs near you
Infographic showing various Director Rf job openings in Orlando, FL as of September 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $140,579 per year, or $67.6 per hour.

RF Technician I-V

Orlando, FL • On-site

Mtron
See more jobs at Mtronexternal

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted yesterday

Job description

Job Title: 2nd Shift - RF Technician I-V
Department: Operations
Reports to: Production Supervisor Technician
Pay Rate: Dependent upon experience
Location: Orlando, FL (On-site)
Position Summary:
The RF technician is responsible for tuning, testing, and verifying RF filters and oscillators and ensuring they meet the customer's expectations. The technician will tune various RF filters, including, but not limited to lumped element (LC) filters, crystal, and cavity-based filters and RF oscillators including TCXOs, VCXOs, and OCXOs. The RF technician will also perform various environmental tests to ensure compliance with the customer's specifications.
Job Duties and Responsibilities:
RF Technician I:
  • Able to read and follow procedures exactly as written.
  • Follow Good Manufacturing Practices (2D0-1004) including STEP-C
  • Full understanding of MtronPTI ESD procedures
  • Uses computer and/or manually records data as needed.
  • Performs environmental testing as required which might include the following: vibration, mechanical shock, thermal shock, etc.
  • Takes direction from supervisor and other senior team members.
  • Maintains safe and clean working environment by adhering to GMP (good manufacturing practices)
  • Use of hand tools such as torque tools, calipers.
  • Follow safe guidelines for chemical use and storage.
  • Understands and uses leak detection equipment (gross / fine)
  • Maintains safe and clean working areas.
RF Technician II:
  • All functions of RF Technician I
  • Use of various test equipment: Network /spectrum analyzers, frequency counters, mixers, power meters, etc.
  • Tune various RF filters, including, but not limited to lumped element (LC) filters, crystal, and cavity-based filters.
  • Is a basic oscillator set up for frequency and output power SOT components.
  • Able to be self-sufficient in the main work area.
  • Updates tracking boards and various floor queues as needed.
  • Assists in preparing and lining up work for Filter Technician I personnel.
RF Technician III:
  • All functions of RF Technician II
  • Well cross-trained within their department but can also work in other departments within the filter production area.
  • Ability to handle and tune all space level filters and highly difficult (high frequency) to tune models.
  • For oscillator products, does set up on difficult, high frequency devices that might require multiple SOT components.
  • Perform common troubleshooting for oscillator / filter products (i.e. determining incorrect component values, number of turns on coils, etc.)
  • Performs full set ups for various tests including, but not limited to, IM, Phase noise, operation under vibration, etc.
RF Technician IV:
  • All functions of RF Technician III
  • Works with process / design engineering to suggest changes in the process or product to improve throughput, yield, etc.
  • Perform advanced troubleshooting
  • For oscillator products, able to troubleshoot circuits to component level using schematics and various measurement equipment.
  • For filter products, this includes, but is not limited to determining grounding issues, resolving test fixture and test methods, calibration issues, and complex problems with assembly and component values.
  • Periodically checks with peers or line leads to support other functions as needed.
  • Mentor Junior Technicians.
RF Technician V:
  • All functions of RF Technician IV
  • Is recognized as the Subject Matter Expert in their area.
  • Typically, an Area Lead with additional responsibilities of assigning work, inspections, AX transactions and other similar responsibilities as needed or assigned.
  • Trains Junior Technicians.

Supervises: None
Knowledge, skills, & Abilities:
RF Technician I:
  • Understanding of electrical and electronic circuits
  • Ability to read and understand electrical schematics.
  • Ability to speak and read English clearly.
  • Able to use computer systems and computer programs.
  • Ability to work well within a team of technicians.
  • Organized and reliable.
  • Accountable for addressing any issues in their cell areas to the supervisor.
  • Understanding of basic tools or testing equipment.
RF Technician II:
  • All skills from RF Technician I
  • Ability to switch tasks between multiple areas as needed.
RF Technician III:
  • All skills from RF Technician II
  • Ability to be easily cross trained in other test/tuning functions.
  • Exceptional communication skills with peers, supervisors, and engineering teams
RF Technician IV:
  • All skills from RF Technician III
  • Complete Mastery of procedures and processes in assigned areas (oscillators and/or filters)
RF Technician V:
  • All skills from RF Technician IV
  • Ability to direct others
  • Computer skills for AX transactions and other data entry requirements

Education, Experience, & Training:
RF Technician I:
  • Must be able to work with ITAR data without a license.
  • Basic understanding of electrical and electronic circuits
  • AS degree in electronics or equivalent experience (Military training, etc.)
RF Technician II:
  • One year of technician experience required.
RF Technician III:
  • Two years of technician experience required and mastery of difficult models.
RF Technician IV:
  • 5+ years of technician experience required
RF Technician V:
  • 10+ years of advanced experience required.

Education, Experience, & Training:
  • Some light lifting required
  • Sitting for long periods
  • Squatting or bending
  • Walking around the cell or production floor
  • Must be able to work on ITAR data without a license
  • Must have the ability to obtain a security clearance
Compensation & Benefits:
  • Competitive Wage (based on experience).
  • Bonus: Annual bonus based on achieving company and individual goals.
  • Benefits: Comprehensive medical, dental, and vision coverage.
  • Retirement: 401(k) savings plan.
  • Paid Time Off.
  • Life Insurance at no cost to the associate.
  • Short/Long-Term disability at no cost to the associate.
  • Opportunities for career advancement, professional development and so much more!
Equal Opportunity Statement:
Mtron is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Conditions of Employment:
Employment is contingent upon the success of background check and drug screening.
Job Title: 1st-RF Technician I-V
Job Type: Full Time
Job Location: Orlando, FL
Department: Operations

Apply