Director Pud 3 Jobs (NOW HIRING)

Closing Date to Apply: This position is open until filled. Applications will be reviewed as they are received. The position may close at any time once a sufficient pool of qualified candidates has been established.

Salary:

Engineer I: $80,366 - $129,813
Midpoint: $105,090

Engineer II: $85,623 - $139,896
Midpoint: $112,760

Engineer III: $104,822 - $177,107
Midpoint: $140,964

Engineer IV: $112,585 - $192,317
Midpoint: $152,452

Engineer V: $130,666 - $228,062
Midpoint: $179,364

Grant PUD posts the full salary range for each position. The midpoint is provided as a reference point and is not a guaranteed starting pay. Starting pay is based on job-related factors such as qualifications, experience, skills, internal alignment, and organizational needs. Most new hires are typically placed between the minimum and midpoint of the range.

Benefits: This link below will provide you with Grant PUD’s benefit that may be available if hired, different employee types are eligible for different benefits.

Grant PUD — Unified Insurance Program (uip-wa.org)

Grant County PUD will administer a background check as part of the hiring process, if selected for this position. 

Applicants meeting minimum qualifications may be further evaluated based on preferred qualifications and job-related criteria. Only the most qualified candidates will be referred for further consideration.

The District may use the applicant pool and results from this recruitment to fill additional vacancies in the same classification for up to six (6) months following the recruitment closing date, consistent with District policy and applicable law.

Position Summary

Be part of a Power Delivery team responsible for designing, developing, implementing, and maintaining electrical equipment within Grant County PUD’s transmission and distribution facilities. This position is responsible for providing knowledge and expertise related to substations, transmission and SCADA automation and other supporting facilities within Grant County PUD’s Power Delivery Department.

Essential Functions

Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills. This is not a comprehensive listing of all functions and duties performed by incumbents of this class; employees may be assigned duties which are not listed below; reasonable accommodations will be made as required. The job description does not constitute an employment agreement and is subject to change at any time by the employer. Essential duties and responsibilities may include, but are not limited to, the following:

• Demonstrated commitment to Grant PUD’s mission, vision, values, strategic plan, and Grant PUD / IBEW Local 77 Code of Excellence. The incumbent should be familiar with these organizational priorities and behave in a way that aligns with these expectations.
• Understand and adhere to compliance requirements for this position that may include laws, regulations, security guidelines, Grant PUD policies and procedures.
• If needed to operate a GPUD vehicle for business purposes, refer to the Vehicle/Asset Usage Policy, IS-TA-POL-001.
• Actively participate in all aspects of our safety program, including but not limited to:
  • Following all safety policies and procedures.
  • Alerting supervisors and coworkers to unsafe or hazardous working conditions.
  • Reporting any safety incidents or close calls within 24 hours to your supervisor.
  • Accepting feedback from supervisors and coworkers regarding your own safety performance.
• Support onboarding, mentoring, and training for less experienced team members.
• Perform related duties as required or assigned.

Depending on level and assignment, incumbents may:

• Support, lead, or direct capital execution of projects as it relates to Substation design, materials, and equipment.
• Participate in, lead, or direct processes focusing on operations and engineering practices that drive strong reliability and performance.
• Research, design, and support the implementation of new and upgraded equipment throughout the substation, with guidance appropriate to level.
• Coordinate with different stakeholders and provide input to substation project plans.
• Collaborate with responsible groups and facilitate smooth transition of the design to implementation.
• Develop design requirements relating to the application of equipment in substations.
• Develop technical specification and standards for ordering equipment and parts, and utilize new technology and best practices during design.
• Provide technical expertise and/or team leadership as needed.
• Engage with manufacturers and suppliers, including plant/factory visits and project site visits, and represent the Substation Engineering department on new equipment and vendor evaluations.
• Engage in industry forums and events, including IEEE, SEE, CIGRE, etc.
• Facilitate Substation equipment specification and drawings review; coordinate with manufacturers and vendors to ensure adherence to company requirements.
• Review existing materials, components, and design standards for process improvements, cost savings, etc.
• Perform independent and/or collaborative research to find innovative and cost-effective engineering solutions to operational problems, as appropriate for level.
• Develop training for engineers/partner groups and assist less experienced colleagues in planning, conceptual/detail engineering, and the field, as appropriate for level.
• Support the project team at commission meetings and community open houses, as appropriate for level.
• Assist with, interpret, or communicate company policies and procedures to internal stakeholders and external project support partners, as appropriate for level.
• Serve as a management consultant on engineering problems and issues, as appropriate for level.
• Control technical, financial, and service commitments to internal and external customers, as appropriate for level.
• Provide project management support that includes budget forecasts, scheduling, coordination, construction/commissioning for small, medium, or large-sized projects, as appropriate for level.
• Gain knowledge, apply, or serve as an expert in skills related to best industry practice, Utility Standards, Codes, or other Legal Standards used to support electrical engineering projects and safe and reliable equipment operation.
• Research, understand, or perform work on systems related to impacts to FERC, NERC, and CIP compliance standards, as appropriate for level.

Equipment includes, but is not limited to:

• High/Medium/Low Voltage Distribution systems.
• Control Systems.
• Transformers.
• SCADA systems.
• Protective Relay Equipment.
• High/Medium/Low Voltage Circuit Breakers.
• Battery Systems.
• Other supporting equipment required for the safe and reliable operation of substations.

Works under guidance while learning project management procedures, engineering calculations, and troubleshooting methodologies. Researches and analyzes technical information and data to prepare reports; meets with contract personnel, Grant PUD employees, and other representatives to resolve problems and concerns and answer questions on issues/projects; and assists with field inspections of projects for conformance to approved plans with the assistance of a more experienced team member.

Prepares technical documentation, including Engineering Work Packages, build material lists, and generating new drawings or revising existing drawings. Gains basic understanding about equipment, inspects equipment in the field, develops troubleshooting skillset, participates in activities such as installation, quality control, and production, specifies equipment, works with vendors, and obtains quotes as needed.

Supports capital execution of projects as it relates to low impact Substation design, materials, and equipment. Participates in processes focusing on operations and engineering practices that drive strong reliability and performance. Develops basic understanding about equipment listed in the shared equipment scope.

Researches and supports the implementation of new and upgraded equipment throughout the substation, with considerable guidance from supervisors and peers. Provides project management support for small-sized projects. Gains knowledge in skills related to best industry practice, Utility Standards, Codes, or other Legal Standards used to support electrical engineering projects and safe and reliable equipment operation.

Supports capital execution of projects as it relates to Substation design, materials, and equipment. Leads the development of processes focusing on operations and engineering practices that drive strong reliability and performance with assistance. Coordinates with different stakeholders, provides basic input to substation project plans, and facilitates smooth transition of the design to implementation with support.

Develops design requirements relating to the application of equipment in substations. Develops technical specification and standards for ordering equipment and parts and utilizes new technology and best practices during design with assistance. Provides technical expertise as needed, engages with manufacturers and suppliers, represents Substation Engineering on new equipment and vendor evaluations, and engages in industry forums and events.

Researches, designs, and supports the implementation of new and upgraded equipment throughout the substation, with moderate guidance from supervisor and peers. Provides project management support for small-sized projects. Researches and has an understanding related to impacts to FERC, NERC, and CIP compliance standards.

Leads capital execution of projects as it relates to Substation design, materials, and equipment. Leads the development of processes focusing on operations and engineering practices that drive strong reliability and performance. Leads the Substation project team towards establishment of technical qualifications and policies, reviews equipment specifications, and ensures equipment design is per the District requirement.

Coordinates with different stakeholders and provides direct input to substation project plans. Develops design requirements relating to the application of equipment in substations and assists with interpretation and communication of company policies and procedures to internal stakeholders and external project support partners.

Provides technical expertise and/or team leadership as needed. Develops training for engineers/partner groups and assists less experienced colleagues in planning, conceptual/detail engineering, and the field. Serves as a management consultant on engineering problems and issues. Controls technical, financial, and service commitments to internal and external customers.

Provides strong project management support for medium/large-sized projects. Serves as an expert in utilizing skills related to best industry practice, Utility Standards, Codes, or other Legal Standards required for safe and reliable equipment operation. Performs work on systems with the highest level of risk to regulatory compliance and demonstrates extreme familiarity with impacts to FERC, NERC, and CIP compliance standards.

Leads capital execution of projects and mentors others as it relates to Substation design, materials, and equipment. Directs the development of processes focusing on operations and engineering practices that drive strong reliability and performance. Leads and mentors the Substation project team towards establishment of technical qualifications and policies and develops and teaches the specifications of the equipment.

Coordinates with different stakeholders and provides direct input to substation project plans. Develops design requirements relating to the application of equipment in substations and interprets and communicates company policies and procedures to internal stakeholders and external project support partners.

Provides technical expertise and/or team leadership as needed. Develops training for engineers/partner groups and assists less experienced colleagues in planning, conceptual/detail engineering, and the field. Supports the project team at commission meetings and community open houses.

Serves as a management consultant on complex systematic engineering problems and issues. Controls technical, financial, and service commitments to internal and external customers. Provides strong project management support for medium/large-sized projects. Serves as an expert in best industry practice, Utility Standards, Codes, or other Legal Standards required for safe and reliable equipment operation. Performs work on systems with the highest level of risk to regulatory compliance and demonstrates extreme familiarity with impacts to FERC, NERC, and CIP compliance standards.

A fully skilled candidate will have the following knowledge, skills, and abilities at the level appropriate to the position:

• Understanding and knowledge of substation components and their functions, ranging from basic understanding and knowledge at Engineer II, to knowledge at Engineer III, thorough understanding and knowledge at Engineer IV, and subject matter expert at Engineer V.
• Understanding of substation design principles and practices for major substation equipment, transmission lines, and distribution feeder configurations, ranging from familiar at Engineer II and Engineer III, to firm understanding at Engineer IV, and expert understanding at Engineer V.
• Ability to read, interpret, and modify one-line diagrams, Substation plan and elevation drawings, and, where applicable, AC & DC schematics.
• Ability to generate, interpret, review, and revise existing/new drawings. Experience with AutoCA...