ZipRecruiter

Log In

1

Ddc Control Programmer Jobs (NOW HIRING)

Divcon Controls

Lead DDC Control Technician

The Lead DDC Control Technician serves as the on-site technical authority for DDC/BAS field ... Generate engineering requests for design conflicts, database issues, sequence problems, field ...

Divcon Controls

Senior DDC Control Technician

The Senior DDC Control Technician performs advanced testing, troubleshooting, calibration, system ... Verify controller programs against design sequences, document discrepancies for engineering ...

plug smart

DDC / BAS HVAC Controls Technician

Fort Myers, FL · On-site

$28.25 - $37.25/hr

Perform DDC control start-up on various types of mechanical systems based on DDC control drawings ... Computer programming experience Benefits AMERESCO challenges the brightest, most talented and ...

CMS Controls

DDC Programmer - Wilson

Wilson, NC · On-site

$25.25 - $33.50/hr

This position is responsible for the programming of control systems for commercial Building ... Program and Commission Reliable and ABB DDC controls to meet engineered sequence of operations ...

Piedmont Service Group

DDC Programmer - Wilson

Wilson, NC · On-site

$25.25 - $33.50/hr

This position is responsible for the programming of control systems for commercial Building ... Program and Commission Reliable and ABB DDC controls to meet engineered sequence of operations ...

Divcon Controls

$75K - $99K/yr

The Lead Field DDC Engineer is a senior technical leader responsible for the design, development ... Define project-level control strategies, DDC architecture, controller configurations, network ...

Divcon Controls

Lead Field DDC Engineer

$104K - $138K/yr

The Lead Field DDC Engineer is a senior technical leader responsible for the design, development ... Define project-level control strategies, DDC architecture, controller configurations, network ...

htseng

HVAC Control Systems Technician

Houston, TX

$35 - $50/hr

This is a hands-on technical position focused on troubleshooting, programming, repairing, and optimizing DDC control systems. You'll work independently in the field while also partnering with ...

htseng

HVAC Control Systems Technician

Houston, TX · On-site

$35 - $50/hr

This is a hands-on technical position focused on troubleshooting, programming, repairing, and optimizing DDC control systems. You'll work independently in the field while also partnering with ...

Kfi ENG

$71K - $94K/yr

To provide high quality control documents, the Senior Controls Engineer will be capable of ... Mastery of SCADA and/or DDC graphic screen development software. * Edit, write, and review ...

Ameresco

Senior Controls System Specialist

Lexington, KY · On-site

$40 - $50/hr

As a Controls Senior System Specialist, you will play a critical role in the design, implementation, programming, optimization, and management of advanced DDC control systems in commercial buildings.

Kfi ENG

Senior Controls Engineer - DDC

Minnetonka, MN · On-site

$98K - $130K/yr

To provide high quality control documents, the Senior Controls Engineer will be capable of ... Mastery of SCADA and/or DDC graphic screen development software. * Edit, write, and review ...

Jobtailor

Controls Application Engineer, Data Center

Dallas, TX · On-site

$83K - $107K/yr

Support multiple engineering functions within the Controls Engineering group * Report to the ... Strong knowledge of DDC control theory & HVAC applications and ability to apply these principles to ...

New

Ameresco

Controls Project Manager

Cincinnati, OH · On-site

As a Controls Project Manager, you will be responsible for programming and implementing Direct Digital Control (DDC) systems for various building automation projects. You will collaborate with ...

Ameresco

Controls Project Manager

Cincinnati, OH · On-site

As a Controls Project Manager, you will be responsible for programming and implementing Direct Digital Control (DDC) systems for various building automation projects. You will collaborate with ...

next page

Showing results 1-20

All JobsManufacturing JobsMachining JobsMachine Programmer JobsDdc Control Programmer Jobs

Ddc Control Programmer information

See salary details

$16

$41

$60

How much do ddc control programmer jobs pay per hour?

As of Sep 11, 2026, the average hourly pay for ddc control programmer in the United States is $41.72, according to ZipRecruiter salary data. Most workers in this role earn between $31.01 and $54.09 per hour, depending on experience, location, and employer.

What are popular job titles related to Ddc Control Programmer jobs?

For Ddc Control Programmer jobs, the most frequently searched job titles are:

Infographic showing various Ddc Control Programmer job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 75% Full Time, 19% Part Time, 4% Contract, and 1% Nights. Highlights an 95% Physical, 1% Hybrid, and 4% Remote job distribution, with an average salary of $86,770 per year, or $41.7 per hour.

Lead DDC Control Technician

Remote

Divcon Controls
Industrial Automation Equipment Manufacturing • 11 - 50 employees
Learn more about Divcon Controlsexternal

Full-time

Re-posted 28 days ago

Job description

About the role:
The Lead DDC Control Technician serves as the on-site technical authority for DDC/BAS field execution from installation verification through commissioning and turnover readiness. This role supervises assigned technicians, coordinates technical readiness with project management and other stakeholders, resolves complex field issues, owns documentation quality, and approves systems for startup and functional testing.
The Lead DDC Control Technician is responsible for leading, resolving, coordinating, and owning technical readiness for DDC/BAS project work while maintaining internal focus on field execution, quality, documentation, safety, and technician development.
This position requires regular travel. Per diem, lodging, and travel accommodation are provided in accordance with company policy.
Must be willing to travel 95% of the time including weekends and after-hours.
Key Responsibilities:
  • Serve as direct field supervisor for assigned Control Technicians and Senior DDC Control Technicians, assign daily work, monitor quality and pace against the schedule, and support performance feedback.
  • Lead field execution from installation verification through startup, commissioning, retesting, and turnover readiness; own commissioning readiness determination before functional testing proceeds.
  • Review drawings, sequences, databases, schedules, network architecture, field conditions, equipment submittals, controls submittals, TAB data, and point lists for technical completeness and design-intent alignment.
  • Approve panel wiring as ready for startup, establish field panel wiring standards, identify systemic wiring issues, and coordinate resolution with installers and engineering/design teams.
  • Review and approve calibration records, valve stroking documentation, PID tuning work, commissioning scripts, SCADA/graphics completeness, EPMS validation documentation, and other Senior Technician deliverables.
  • Perform or direct advanced troubleshooting of DDC/BAS programs, sequence conflicts, intermittent electrical faults, communication failures, network architecture issues, and design incongruencies.
  • Generate engineering requests for design conflicts, database issues, sequence problems, field discrepancies, and documentation gaps; manage escalation to project management, engineering, design teams, vendors, or other appropriate parties.
  • Own the issue tracking workflow by ensuring issues are logged, assigned, resolved, retested, and closed with sufficient documentation.
  • Create or approve project-specific QC forms, commissioning documentation templates, MOPs for complex or critical activities, and final field documentation packages before submission.
  • Attend trade coordination meetings, coordinate with facility IT teams and other trades, represent Divcon's technical position onsite, and support the Project Manager with scheduling, resource planning, site logistics, and DivPro updates.
  • Enforce safe work practices, lead pre-task safety planning for complex commissioning activities, and stop work when unsafe conditions are observed.

Qualifications:
  • Minimum 5 years of hands-on experience installing, configuring, commissioning, or leading Building Management Systems / DDC controls work.
  • Advanced DDC/BAS technical knowledge, including HVAC/mechanical systems, central plant sequencing, SOO validation, TAB coordination, QA/QC processes, commissioning processes, and multi-vendor BAS integration.
  • Author/review-level fluency in one or more DDC/BAS platforms such as Tridium Niagara, Delta Controls, Distech, Siemens Desigo, JCI Metasys, Schneider EcoStruxure, or similar.
  • Advanced protocol and network knowledge, including BACnet traffic analysis, Modbus auditing, gateway integrations, IP subnet design, VLAN segmentation awareness, cybersecurity fundamentals, firewall coordination, credentials, and remote access configuration.
  • Demonstrated ability to supervise field teams, coordinate trades, communicate technical positions clearly, and resolve issues while maintaining documentation and schedule discipline.
  • Working knowledge of AEC industry processes and construction documents, including CSI MasterFormat concepts, RFIs, submittals, plans, specifications, controls submittals, and equipment submittals.
  • Ability to own site records, redlines, QA/QC documentation, commissioning documentation, issue tracking, MOPs, and turnover readiness in partnership with the Project Manager.

Experience:
  • Experience leading on-site commissioning activities, supervising technician teams, coordinating installation subcontractors, and managing technical readiness for BMS/DDC projects.
  • Experience resolving complex hardware, software, database, network, sequence, and system performance issues in active construction or operational environments.
  • Experience reviewing and approving QC, Cx, redline, commissioning, issue tracking, MOP, and turnover documentation for completeness and accuracy.
  • Experience collaborating with project managers, engineers, architects, commissioning agents, TAB contractors, IT teams, clients, vendors, and trade partners to resolve technical and coordination issues

Physical Requirements:
  • Ability to travel frequently to job sites by car or plane, up to 85%
  • Ability to stand, walk, and move throughout job sites for extended periods
  • Ability to climb ladders, stairs, and lifts as required
  • Ability to bend, kneel, crouch, and work in tight or confined spaces
  • Ability to lift, carry, and maneuver equipment and materials up to 50 pounds
  • Manual dexterity to handle tools, wiring, and small components
  • Ability to work at heights and in varying indoor and outdoor conditions
  • Ability to wear and work in personal protective equipment when required (hard hat, vest, safety glasses, gloves, and safety-toed boots)
  • Visual keenness to read schematics, labels, and digital displays
  • Ability to visually identify and differentiate wires by assigned color
  • Ability to hear and respond to alarms, equipment sounds, and verbal instructions
  • Capability to safely operate hand and power tools

Divcon does not accept unsolicited resumes from agencies. Agencies must have a signed agreement in place prior to submitting any candidate. Unsolicited resumes will be considered the property of Divcon, and no fees will be paid.
About Us:
Headquartered in Dallas, Texas, Divcon delivers fully integrated automation solutions nationwide that optimize performance, energy efficiency, and reliability across HVAC, lighting, power monitoring, and mission-critical systems. Leveraging advanced technologies - including Allen-Bradley PLCs, Ignition SCADA, and Delta DDC systems - we combine deep technical expertise with field-tested execution to deliver precise, scalable, and high-performance solutions.

Apply