ZipRecruiter

Log In

1

Contract Pipe Insulation Jobs (NOW HIRING)

Facility Services Inc.

HVAC Mechanic

San Diego, CA · On-site

$24.35 - $58.28/hr

Wraps pipe in insulation batting and secure them in place with cement or wire bands. * Replace ... the contract in which the employee is working. Physical Requirements: The physical demands ...

Taurus Industrial Group

Be Seen First

Civil Supervisor

Pasadena, TX · On-site

This includes preparing cost estimates, budgets, and work schedules, interpreting contracts and ... pipe and structural steel fabrication, rotating equipment maintenance and repairs, full-service ...

Taurus Industrial Group

Be Seen First

Civil Supervisor

Pasadena, TX · On-site

This includes preparing cost estimates, budgets, and work schedules, interpreting contracts and ... pipe and structural steel fabrication, rotating equipment maintenance and repairs, full-service ...

Thorpe Plant Services, Inc.

Craftsman

Houston, TX

$22 - $27.75/hr

Measure, cut, thread, bend, and weld pipes using hand tools, machines, and welding equipment ... Coordinate installation with other trades, such as scaffolders, insulators, and corrosion ...

Techlink Systems

Be Seen First

Maintenance Labor/Mechanic/Technician/SS

Lancaster, PA · On-site

$24 - $26/hr

Contract until 02/03/2027 Work Hours: PM (21:00 - 07:00) Job Details Maintenance Mechanic Plant ... Duties may involve pipe fitting; HVAC maintenance; insulating; welding; machining; carpentry ...

New

Thorpe Specialty Services Corporation

Craftsman

Houston, TX · On-site

$22 - $27.75/hr

Measure, cut, thread, bend, and weld pipes using hand tools, machines, and welding equipment ... Coordinate installation with other trades, such as scaffolders, insulators, and corrosion ...

Alutiiq

General Maintenance Worker

Washington, DC

... pipes in insulation, replace defective breaker controls, thermostats, switches, fuses, and ... Must possess valid driver's license Pursuant to Government Contract, you must be a U.S. citizen ...

Alutiiq, LLC

Maintenance Mechanic

Washington, DC · On-site

$57.90/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

... pipes in insulation, replace defective breaker controls, thermostats, switches, fuses, and ... Positions covered by the McNamara O'Hara Service Contract Act (SCA), Davis-Bacon Act (DBA), or a ...

J&J Maintenance

HVAC Mechanic I - SCA

Providence, RI

$33 - $35/hr

Wraps pipes in insulation batting and secure them in place with cement or wire bands. Replace ... THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT ...

Facility Services Management Inc.

HVAC Mechanic

FL

$23.98/hr

Wraps pipe in insulation batting and secure them in place with cement or wire bands. * Replace ... the contract in which the employee is working. Physical Requirements * The physical demands ...

Facility Services Inc.

HVAC Mechanic

FL · On-site

$23.98/hr

Wraps pipe in insulation batting and secure them in place with cement or wire bands. * Replace ... the contract in which the employee is working. Physical Requirements * The physical demands ...

Facility Services Management Inc.

HVAC Mechanic

FL

$23.98/hr

Wraps pipe in insulation batting and secure them in place with cement or wire bands. * Replace ... the contract in which the employee is working. Physical Requirements * The physical demands ...

Deployed Global Solutions, LLC.

Plumber

Perkasie, PA · On-site

$40 - $55/hr

Install various types of insulation including fiberglass, neoprene, rubber, etc., on pipe systems ... Must be able to pass federal contract OCONUS deployment requirements published by the US Government ...

previous page

Showing results 41-60

All JobsContract Pipe Insulation Jobs

Contract Pipe Insulation information

See salary details

$15

$24

$47

How much do contract pipe insulation jobs pay per hour?

As of Aug 15, 2026, the average hourly pay for contract pipe insulation in the United States is $24.74, according to ZipRecruiter salary data. Most workers in this role earn between $19.23 and $25.00 per hour, depending on experience, location, and employer.

Is being a contract pipe insulator a good job?

Contract pipe insulators install insulation on pipes in commercial and industrial settings, often working outdoors or in confined spaces. The job can offer steady employment and competitive wages, especially with experience and certifications, but it may involve physical labor, exposure to weather, and safety risks. Opportunities depend on regional demand and industry growth.

How to become a contract pipe insulator?

To become a contract pipe insulator, you typically need a high school diploma or equivalent, followed by completing an apprenticeship program that combines on-the-job training with classroom instruction. Skills in reading blueprints, understanding insulation materials, and safety procedures are essential, and obtaining relevant certifications can improve job prospects.

What are some typical challenges faced by contract pipe insulation professionals on job sites?

Contract pipe insulation professionals often encounter challenges such as working in cramped or elevated spaces, adhering to strict safety standards, and coordinating schedules with other trades on-site. Managing material delivery and storage can also be difficult, especially on large projects with multiple phases. Additionally, staying up-to-date with evolving insulation technologies and ensuring compliance with environmental and building codes are important aspects of the role. Collaborating effectively with project managers, engineers, and other contractors is key to meeting deadlines and maintaining quality standards.

What is the difference between Contract Pipe Insulation vs Pipe Insulation Installer?

AspectContract Pipe InsulationPipe Insulation Installer
CertificationsOSHA safety training, industry-specific certificationsOSHA safety training, insulation-specific certifications
Work EnvironmentConstruction sites, industrial facilities, commercial buildingsConstruction sites, industrial facilities, commercial buildings
Job RoleOversees insulation projects, manages contracts, coordinates teamsPerforms insulation installation, measures, cuts, and secures insulation materials

Contract Pipe Insulation roles typically involve project management and oversight, while Pipe Insulation Installers focus on the hands-on installation work. Both roles require similar safety certifications and work in comparable environments, but their responsibilities differ in scope and focus.

How much does a contract pipe insulator make?

A contract pipe insulator typically earns between $20 and $35 per hour, depending on experience, location, and project complexity. Salaries can also be influenced by certifications, union membership, and the scope of the work environment.

What is a contract pipe insulation job?

Contract pipe insulation jobs involve the installation, maintenance, or removal of insulation materials around pipes in residential, commercial, or industrial settings. The primary goal is to improve energy efficiency, prevent heat loss or gain, and protect pipes from freezing or condensation. Contractors take on specific projects, often working with builders, facility managers, or directly with property owners. They select appropriate insulation materials, ensure proper installation, and adhere to safety and building codes. These jobs require technical knowledge, physical skill, and attention to detail.

What are the key skills and qualifications needed to thrive as a contract pipe insulation worker?

To thrive as a Contract Pipe Insulation worker, you need a solid understanding of insulation materials, installation techniques, and basic blueprint reading, often supported by a high school diploma or completion of an apprenticeship. Familiarity with hand and power tools, safety equipment, and adherence to OSHA regulations are typically required. Strong attention to detail, problem-solving ability, and teamwork make someone stand out in this position. These skills and qualities are crucial for ensuring safe, efficient, and effective insulation work on various construction or maintenance projects.
More about Contract Pipe Insulation jobs

What cities are hiring for Contract Pipe Insulation jobs?

Cities with the most Contract Pipe Insulation job openings:

What are the most commonly searched types of Pipe Insulation jobs?

The most popular types of Pipe Insulation jobs are:

What states have the most Contract Pipe Insulation jobs?

States with the most job openings for Contract Pipe Insulation jobs include:

What job categories do people searching Contract Pipe Insulation jobs look for?

The top searched job categories for Contract Pipe Insulation jobs are:

Contract Pipe Insulation jobs near you
Infographic showing various Contract Pipe Insulation job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 92% Full Time, 5% Part Time, 1% Contract, and 1% Nights. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $51,463 per year, or $24.7 per hour.

HVAC Mechanic

Facility Services Inc.

San Diego, CA • On-site

$24.35 - $58.28/hr

Full-time

Posted 19 days ago

Job description

Job Summary
HVAC Mechanic will perform heating, ventilations, and air-conditioning mechanic installation, perform preventive maintenance and repairs environmental-control systems and equipment. Identifying maintenance risks on equipment. Diagnose electrical and mechanical faults for HVAC systems. Clean, adjust and repair systems, and perform warranty services.
Responsibilities include the following. Other duties may be assigned.
  • Installs, services and repairs electric, electronic, pneumatic and direct digital environmental control systems in office buildings and other commercial establishments, utilizing knowledge of refrigeration theory, pipefitting and structural layout.
  • Mounts compressor and condenser units on platform or floor, using hand tools and following blueprints or engineering specifications.
  • Fabricates, assembles and installs ductwork and chassis parts, using portable metalworking tools and welding equipment. Installs evaporator unit in chassis or in air duct system and medical refrigerators.
  • Cuts and bends tubing and pipe using proper tools. Joins tubing or pipes using sleeves, couplings or unions and solders joints using torch, forming complete circuit for refrigerant. Installs expansion and discharge valve in circuit.
  • Connects motors, compressors, temperature controls, humidity controls and circulating ventilation fans to control panels and connects control panels to power source. Installs air and water filters in completed installation.
  • Perform pressure tests on systems using nitrogen gas and checks joints/filling connections using gauges and soap and water solution prior to the installation of refrigerant.
  • Observes pressure and vacuum gauges and adjusts controls to insure proper operation.
  • Wraps pipe in insulation batting and secure them in place with cement or wire bands.
  • Replace defective breaker controls and installs units using electrician's hand tools and test equipment.
  • May install, repair and service air conditioners, package A/C & chillers ranging up to 400-ton cooling capacity in commercial facilities.

Education and/or Work Experience Requirements
  • High School Diploma or General Education Degree (GED).
  • Must possess a valid driver's license, insurable driving record.
  • The ability to read and write English.
  • Must be able to pass a company drug screen and background check.
  • Must possess or be able to obtain a NACI (National Agency Check with Inquiries).
  • All state or federal license requirements; or any licenses or certificates that may be required by the contract in which the employee is working.

Physical Requirements:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to continually bend, squat, kneel, lift, twist, climb, reach, stand and walk; to use hands for repetitive pushing, pulling, and single grasp motion; and to frequently lift and carry objects weighing up to 50 pounds and to move objects in excess of 50 pounds, and travel by company vehicle to work location or to other destinations as required.
Pay Range: $24.35 - $58.28 per hour

Apply