ZipRecruiter

Log In

1

Contract Fire Inspector Jobs in Norwalk, CA (NOW HIRING)

Pacificaservices

Mechanical Inspector

Los Angeles, CA · On-site

$131 - $141/hr

... contracts, permits, environmental documents, agreements for work, and may provide construction ... Venting, fire sprinklers, and gas piping * Mechanical ventilation and exhaust * Fire and life ...

City of Montclair, CA

Fire Engineer

Montclair, CA · On-site

$89K - $108K/yr

MFFA The contents of the job bulletin should not be construed as an implied contract. All ... inspection, preventive maintenance and minor repairs of Department apparatus and equipment ...

City of Montclair

Fire Engineer

Montclair, CA · On-site

$89K - $108K/yr

The contents of the job bulletin should not be construed as an implied contract. All information is ... inspection, preventive maintenance and minor repairs of Department apparatus and equipment ...

SummitHR

Mechanical Inspector

Los Angeles, CA · On-site

$70 - $80/hr

... contracts, permits, environmental documents,agreements for work, and may provide construction ... Venting, fire sprinklers, and gas piping* HVAC systems (air handlers, chillers, boilers, ductwork)

SummitHR

Mechanical Inspector

Los Angeles, CA · On-site

$27.25 - $36/hr

... contracts, permits, environmental documents, agreements for work, and may provide construction ... Venting, fire sprinklers, and gas piping • HVAC systems (air handlers, chillers, boilers ...

SummitHR

Mechanical Inspector

Los Angeles, CA · On-site

$70 - $80/hr

... contracts, permits, environmental documents, agreements for work, and may provide construction ... Venting, fire sprinklers, and gas piping • HVAC systems (air handlers, chillers, boilers ...

Rimkus Consulting Group

Fire Investigator

Los Angeles, CA · On-site

$83.30 - $124.90/hr

Employee must be sharp, focused, and alert when conducting site inspections interacting with ... THIS IS SUBJECT TO CHANGE AND DOES NOT CONSTITUTE A CONTRACT FOR EMPLOYMENT OR A GUARANTEE OF ...

next page

Showing results 1-20

All JobsContract Fire Inspector JobsContract Fire Inspector Jobs in Norwalk, CA

Contract Fire Inspector information

See Norwalk, CA salary details

$10

$28

$47

How much do contract fire inspector jobs pay per hour?

As of Sep 5, 2026, the average hourly pay for contract fire inspector in Norwalk, CA is $28.01, according to ZipRecruiter salary data. Most workers in this role earn between $19.42 and $33.70 per hour, depending on experience, location, and employer.

What is a contract fire inspector?

Contract Fire Inspectors are professionals hired on a contractual basis to evaluate buildings and properties for compliance with fire safety codes and regulations. They conduct inspections, review fire prevention systems, and ensure that structures meet legal requirements to minimize fire risks. Unlike government-employed fire inspectors, contract inspectors often work for private companies or as independent consultants, providing services to various clients as needed. Their work plays a critical role in public safety, reducing the likelihood of fires and ensuring proper emergency preparedness.

What are the key skills and qualifications needed to thrive as a contract fire inspector?

To thrive as a Contract Fire Inspector, you need a solid understanding of fire codes, inspection procedures, and building safety regulations, often supported by relevant certifications such as NFPA or ICC Fire Inspector credentials. Familiarity with fire inspection software, digital reporting tools, and standard safety equipment is typically required. Strong attention to detail, communication skills, and the ability to work independently in diverse environments are standout soft skills. These competencies are vital to ensure compliance, mitigate fire risks, and uphold public safety standards during inspections.

What are some common challenges faced by contract fire inspectors when working with multiple clients or facilities?

Contract Fire Inspectors often work with a variety of clients, each with different facility types, fire codes, and operational procedures. A common challenge is staying up-to-date with local and national fire regulations as they vary by jurisdiction and industry. Additionally, contract inspectors must effectively manage their schedules and communication across multiple sites, ensuring thorough documentation and clear feedback to each client. Adaptability and strong organizational skills are essential for addressing unique hazards and compliance requirements at each location.

What is the difference between Contract Fire Inspector vs Fire Marshal?

AspectContract Fire InspectorFire Marshal
CertificationsFire Inspector Certification, OSHAFire Inspector Certification, Fire Prevention Officer Certification
Work EnvironmentTemporary or project-based inspections, on-site evaluationsLeadership role, overseeing fire safety programs citywide or regionally
Employer & IndustryPrivate contractors, construction sites, inspection agenciesGovernment agencies, fire departments, municipalities

Contract Fire Inspectors focus on conducting fire safety inspections for specific projects or clients, often on a temporary basis. Fire Marshals hold a broader, leadership role in enforcing fire codes, overseeing fire prevention programs, and managing fire safety policies within communities or organizations. While both roles require similar certifications, their scope, responsibilities, and work environments differ significantly.

What job categories do people searching Contract Fire Inspector jobs in Norwalk, CA look for?

The top searched job categories for Contract Fire Inspector jobs in Norwalk, CA are:

What cities near Norwalk, CA are hiring for Contract Fire Inspector jobs?

Cities near Norwalk, CA with the most Contract Fire Inspector job openings:

Contract Fire Inspector jobs near you
Infographic showing various Contract Fire Inspector job openings in Norwalk, CA as of August 2026, with employment types broken down into 1% As Needed, 85% Full Time, 12% Part Time, and 2% Contract. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $58,255 per year, or $28 per hour.

Mechanical Inspector

Pacificaservices

Los Angeles, CA • On-site

$131 - $141/hr

Other

Posted 4 days ago

Job description

Inspects the construction of a wide variety of airport improvements and utilities projects to ensure conformance to plans, specifications, contracts, permits, environmental documents, agreements for work, and may provide construction inspection support.

Conduct comprehensive daily inspections of mechanical and plumbing systems across building and terminal construction projects, ensuring compliance with applicable codes and project specifications, review and interpret construction documents including blueprints and shop drawings, submittals, RFIs, and change orders.

Demonstrates strong proficiency in preparing comprehensive daily inspection reports that clearly document the WHO, WHAT, WHEN, WHERE, and HOW of all observed construction activities, ensuring accuracy, clarity, and accountability in tracking progress and identifying issues, deficiencies, or safety concerns in a timely manner.

Verify contractor compliance with local and national mechanical and plumbing codes, and LAWA-specific standards.

Track and document time-and-material work, field changes, and job quantities.

Assist in validating contractor progress payment requests based on an approved schedule of values.

Support special inspections and testing activities, coordinating with engineers, contractors, and third‑party agencies as needed.

Perform inspections of Mechanical and Plumbing installations including, but not limited to:
  • Domestic Water and Sewage Systems
  • Venting, fire sprinklers, and gas piping
  • Mechanical ventilation and exhaust
  • Fire and life safety integration (e.g., smoke dampers)
  • Mechanical and plumbing shutdowns, lockout / tagout procedures
  • Commissioning and balancing reports
  • Fire life safety systems including smoke/heat detectors and FM‑200 suppression systems
Hardware/Software Knowledge

Knowledge of Project Management Information Software used for inspection/document control (i.e., Microsoft Office, Outlook, Excel, Word, PM Web, Adobe Pro, Bluebeam, etc.).

Computer proficiency to review and utilize electronic equipment for contract documents efficiently, including change orders, submittals, RFIs, and other inspection documents, with minimal supervision.

  • 3 years or more of experience performing mechanical inspections on large scale Public Works type projects
Professional Licenses & Certifications
  • Current ICC Certification as a Commercial Mechanical Inspector, 30‑hour Cal‑OSHA training prior to assignment. The 30‑Hour training has to have been received within the last 4 years.
Details

Location: Los Angeles, CA

Employment Type: Full‑Time

Salary: $131,000 - $141,000 /per year

Skill Level: Mid‑Senior Level

Share This Job
#J-18808-Ljbffr

Apply