ZipRecruiter

Log In

1

Cold Heading Jobs in Rochester, MI (NOW HIRING)

MNP

Cold Header Operator

Utica, MI · On-site

$20 - $28/hr

... heading, rolling, heat treating, plating, coating, packaging, and distributing. Employees at MNP ... About the role of a Cold Header Operator : Bolt makers, header operators, and roller operators are ...

MNP

Cold Header Operator

Utica, MI · On-site

... heading, rolling, heat treating, plating, coating, packaging, and distributing. Employees at MNP ... About the role of a Cold Header Operator : Bolt makers, header operators, and roller operators are ...

MNP

Cold Header Operator

Utica, MI · On-site

$20 - $28/hr

... heading, rolling, heat treating, plating, coating, packaging, and distributing. Employees at MNP ... About the role of a Cold Header Operator : Bolt makers, header operators, and roller operators are ...

PennEngineering

Die Repair

Waterford, MI · On-site

High School Diploma * 3 years of cold heading experience or die assembly/repair experience Skills & Competencies * Able to read and understand too prints and tool assembly prints. * Ability to ...

Synerfac Technical Staffing

Die Repair

Waterford, MI

$26 - $31/hr

High school diploma * 3+ years of cold heading experience or die assembly/repair experience * Must be able to work Monday to Friday 6am to 4pm * Able to read and understand prints and disassembler ...

fontana

Header Operator III

Sterling Heights, MI

Operating understanding of cold heading machines. * Set up and operate Formax 34's, 44's, 54's. * Remove and Install Punch & Die Packs, Transfer, and Dies as needed (Rough In Changeover). * Set-up ...

fontana

Header Operator I

Sterling Heights, MI · On-site

Operating understanding of cold heading machines. * Set up and operate Formax 34's, 44's, 54's. * Remove and Install Punch & Die Packs, Transfer, and Dies as needed (Rough In Changeover). * Set-up ...

Fontana

Header Operator I

Sterling Heights, MI · On-site

Operating understanding of cold heading machines. * Set up and operate Formax 34's, 44's, 54's. * Remove and Install Punch & Die Packs, Transfer, and Dies as needed (Rough In Changeover). * Set-up ...

Fontana

Header Operator III

Sterling Heights, MI · On-site

Operating understanding of cold heading machines. * Set up and operate Formax 34's, 44's, 54's. * Remove and Install Punch & Die Packs, Transfer, and Dies as needed (Rough In Changeover). * Set-up ...

Aampower

Heavy Press Operator

Royal Oak, MI

$15.50 - $20/hr

While not required, prior experience in forging, metal forming processes, machine repair/maintenance, or cold heading is preferred. Candidates must be able to manage a fast paced schedule that ...

MNP

Cold Header Operator Trainee

Madison Heights, MI · On-site

$20/hr

... heading, rolling, heat treating, plating, coating, packaging, and distributing. Employees at MNP ... and become qualified Cold Header or Thread Roller Operators. Experienced header and roller ...

MNP

Cold Header Operator Trainee

Utica, MI · On-site

$20/hr

... heading, rolling, heat treating, plating, coating, packaging, and distributing. Employees at MNP ... and become qualified Cold Header or Thread Roller Operators. Experienced header and roller ...

MNP

Machine Operator Trainee

Madison Heights, MI · On-site

$20/hr

... heading, rolling, heat treating, plating, coating, packaging, and distributing. Employees at MNP ... and become qualified Cold Header or Thread Roller Operators. Experienced header and roller ...

MNP

Machine Operator Trainee

Madison Heights, MI · On-site

$15 - $18.25/hr

... heading, rolling, heat treating, plating, coating, packaging, and distributing. Employees at MNP ... and become qualified Cold Header or Thread Roller Operators. Experienced header and roller ...

next page

Showing results 1-20

All JobsCold Heading JobsCold Heading Jobs in Rochester, MI

Cold Heading information

See Rochester, MI salary details

$15

$25

$47

How much do cold heading jobs pay per hour?

As of Jul 26, 2026, the average hourly pay for cold heading in Rochester, MI is $25.99, according to ZipRecruiter salary data. Most workers in this role earn between $19.71 and $28.56 per hour, depending on experience, location, and employer.

What types of products and materials will I typically work with as a Cold Heading operator?

As a Cold Heading operator, you’ll typically work with metal wire or rods made of materials like steel, brass, or aluminum to produce fasteners such as bolts, screws, rivets, and pins. Your day-to-day tasks involve setting up and running cold heading machines, inspecting finished components, and performing routine maintenance. The fast-paced manufacturing environment often requires collaboration with quality control staff, maintenance teams, and supervisors to ensure products meet specifications. This role provides exposure to a variety of metal-forming techniques, which can lay a solid foundation for advancing into supervisory, quality assurance, or technical specialist roles over time.

What jobs will no longer exist in 2030?

Cold heading jobs, which involve shaping metal parts using mechanical presses, are likely to decline due to automation and advances in manufacturing technology. Many tasks currently performed manually or with basic machinery are expected to be replaced by robotic systems and computer-controlled processes by 2030.

Did the US lose 33,000 jobs in June?

As a cold heading operator, employment data such as job losses are typically reported by government agencies like the Bureau of Labor Statistics. There was a reported loss of approximately 33,000 jobs in June across various sectors, but this figure is not specific to cold heading or manufacturing roles. Job market fluctuations can impact manufacturing employment, including cold heading positions, depending on economic conditions.

What are the key skills and qualifications needed to thrive in the Cold Heading position, and why are they important?

To thrive in Cold Heading, you need strong mechanical aptitude, attention to detail, and experience with metalworking or machine operation, often acquired through vocational training or on-the-job experience. Familiarity with cold heading machines, measuring instruments such as micrometers and calipers, and safety protocols is typically required. Strong problem-solving skills, teamwork, and effective communication help you adapt to production demands and collaborate efficiently with colleagues. These skills ensure high-quality output, minimize machine downtime, and support a safe, efficient manufacturing environment.

What jobs pay 4000 a week without a degree?

Cold heading is a manufacturing process used in metalworking to produce fasteners and small metal parts, typically requiring specialized machinery and skills. While some skilled trades or sales roles in certain industries can pay around $4,000 weekly without a degree, most high-paying jobs in manufacturing or technical fields often require experience, certifications, or on-the-job training. High earnings without a degree are more common in sales, entrepreneurship, or skilled trades rather than specific manufacturing roles like cold heading.

What is a Cold Heading job?

A Cold Heading job involves operating machinery that shapes metal parts without using heat, typically for manufacturing fasteners like bolts, screws, and rivets. Workers feed metal wire or rods into specialized machines that apply high-pressure forces to form the desired shape. This role requires mechanical skills, attention to detail, and the ability to troubleshoot machine issues. Cold heading is a crucial process in mass production, ensuring strong and precise metal components.

What jobs pay $700 a day?

In manufacturing, a skilled cold heading operator can earn around $700 per day, especially with overtime or experience. High-paying roles in specialized trades, such as certain construction or technical positions, may also reach this daily rate, often requiring specific skills, certifications, or experience. These jobs typically involve manual labor, technical expertise, or working in industrial environments.
What job categories do people searching Cold Heading jobs in Rochester, MI look for? The top searched job categories for Cold Heading jobs in Rochester, MI are:
What cities near Rochester, MI are hiring for Cold Heading jobs? Cities near Rochester, MI with the most Cold Heading job openings:
Cold Heading jobs near you
Infographic showing various Cold Heading job openings in Rochester, MI as of July 2026, with employment types broken down into 50% Full Time, and 50% Nights. Highlights an 100% In-person job distribution, with an average salary of $54,059 per year, or $26 per hour.
Cold Header Operator

Cold Header Operator

mCubed Staffing, LLC

Madison Heights, MI • On-site

$25 - $29/hr

Other

Posted 8 days ago

Job description

We are seeking a Cold Header Operator for our 2nd shift operation. This individual will be responsible for operating and monitoring multi-station cold heading equipment, including Sacma and National machines, to produce quality fasteners and components while maintaining production standards and safety requirements. Setup experience is a plus but not required.

5% shift premium for pay as well.

Responsibilities

  • Operate and monitor Sacma and National cold heading machines to produce parts according to specifications and production schedules.
  • Perform routine quality checks using gauges and measuring tools to ensure parts meet customer requirements.
  • Load material, make minor adjustments, troubleshoot basic issues, and maintain a clean and safe work area.
  • Complete production documentation and communicate equipment or quality concerns to supervisors and maintenance personnel.
  • Follow all safety procedures and company policies while meeting productivity goals.

Qualifications

  • Previous experience operating cold heading equipment, preferably Sacma or National machines.
  • Ability to read work instructions and use basic measuring instruments.
  • Mechanical aptitude and ability to troubleshoot minor machine issues.
  • Setup experience on cold headers is highly desirable but not required.
  • Ability to work independently on 2nd shift and lift up to 50 pounds.

Preferred Experience

  • Experience with multi-die cold heading machines.
  • Knowledge of fastener manufacturing processes and quality standards.
  • Ability to perform machine setups and changeovers.