ZipRecruiter

Log In

1

Coating Inspector Jobs in Iowa (NOW HIRING)

Dalton Ag Products

Powder Coat/Paint Technician

Lenox, IA · On-site

$14.25 - $17.75/hr

... coating metal parts by sanding, masking, and cleaning * Complete sand-blasting and powder coat operations within a given time frame and according to written and verbal specifications. * Inspect ...

Manatt's

Diesel Mechanic

Camanche, IA · On-site

$23.75 - $31.25/hr

Summary A Technician II works independently and as a team routinely performing DOT inspections ... We specialize in asphalt, concrete, and chipseal coating, with additional expertise in recycle ...

Manatt's

Diesel Mechanic Technician II

Ames, IA · On-site

$24.50 - $32.25/hr

Summary A Technician II works independently and as a team routinely performing DOT inspections ... We specialize in asphalt, concrete, and chipseal coating, with additional expertise in recycle ...

Manatt's

Diesel Mechanic

Ankeny, IA · On-site

$23.75 - $31.25/hr

Summary A Technician II works independently and as a team routinely performing DOT inspections ... We specialize in asphalt, concrete, and chipseal coating, with additional expertise in recycle ...

Manatt's

Diesel Mechanic - Brooklyn Truck Shop

Brooklyn, IA · On-site

$23 - $30.50/hr

Preform troubleshooting and diagnostics of issues found on inspections in a timely manner ... We specialize in asphalt, concrete, and chipseal coating, with additional expertise in recycle ...

CentiMark Corporation

Service Field Supervisor

Des Moines, IA · On-site

$20 - $32/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Responsible for doing pre-job & post-job inspections * Planning jobs for service crews ... TPO, EPDM, BUR, Foam, Metal, Acrylic & Coating Systems * Must have a good working knowledge of ...

CentiMark Corporation

Service Field Supervisor

Grimes, IA · On-site

$20 - $32/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Responsible for doing pre-job & post-job inspections * Planning jobs for service crews ... TPO, EPDM, BUR, Foam, Metal, Acrylic & Coating Systems * Must have a good working knowledge of ...

Manatt's

Diesel Mechanic

Ankeny, IA · On-site

$23.75 - $31.25/hr

Summary A Technician II works independently and as a team routinely performing DOT inspections ... We specialize in asphalt, concrete, and chipseal coating, with additional expertise in recycle ...

NOVAE LLC

Quality Assurance Coordinator

Red Oak, IA · On-site

Inspect raw materials, parts, in-process and finished trailers to ensure compliance with work ... Knowledge of trailer manufacturing processes including Fabrication, Welding, Coating & Assembly.

NOVAE LLC

Quality Assurance Coordinator

Clarinda, IA · On-site

Inspect raw materials, parts, in-process and finished trailers to ensure compliance with work ... Knowledge of trailer manufacturing processes including Fabrication, Welding, Coating & Assembly.

Manatt's

Field Mechanics

Brooklyn, IA · On-site

$23 - $31.25/hr

... inspections, maintenance and repairs issues on semi tractors, trailers, pickups & many other large ... We specialize in asphalt, concrete, and chipseal coating, with additional expertise in recycle ...

Manatt's

Diesel Mechanic Technician II

Ames, IA · On-site

$24.50 - $32.25/hr

Summary A Technician II works independently and as a team routinely performing DOT inspections ... We specialize in asphalt, concrete, and chipseal coating, with additional expertise in recycle ...

previous page

Showing results 41-60

All JobsCoating Inspector JobsCoating Inspector Jobs in Iowa

Coating Inspector information

See Iowa salary details

$16

$30

$54

How much do coating inspector jobs pay per hour?

As of Aug 17, 2026, the average hourly pay for coating inspector in Iowa is $30.76, according to ZipRecruiter salary data. Most workers in this role earn between $20.77 and $36.11 per hour, depending on experience, location, and employer.

What does a coating inspector do?

A Coating Inspector is responsible for evaluating and ensuring the quality and integrity of protective coatings applied to surfaces, such as pipelines, tanks, or structural steel. They inspect surface preparation, application processes, and finished coatings to verify compliance with project specifications and industry standards. Coating Inspectors use various tools to measure thickness, adhesion, and detect any defects or irregularities. Their work helps prevent corrosion, extend the lifespan of assets, and ensure safety and regulatory compliance.

What does a coating inspector do?

A coating inspector checks industrial equipment to ensure protective coatings were correctly applied and minimize corrosion risk. They go through rigorous training to learn how to identify problems in coating applications and to suggest which types of coatings will protect the materials from corroding. Manufacturing plants, roadway projects such as bridges, and other major industries that utilize paint need coating inspectors for quality assurance.

What are the key skills and qualifications needed to thrive as a coating inspector, and why are they important?

To thrive as a Coating Inspector, you need strong knowledge of surface preparation, coating application processes, industry standards, and relevant inspection techniques, often supported by certifications like NACE or SSPC. Familiarity with inspection tools such as dry film thickness gauges, holiday detectors, and documentation software is crucial. Attention to detail, effective communication, and problem-solving abilities are standout soft skills in this field. These competencies ensure coating systems are applied safely and effectively, protecting assets from corrosion and ensuring compliance with project specifications.

What are some common challenges coating inspectors face when working on large-scale construction projects?

Coating Inspectors on large construction sites often encounter challenges such as coordinating with multiple contractors to ensure coating schedules align with project timelines, dealing with varying weather conditions that can impact coating application and curing, and maintaining strict adherence to industry standards while under tight deadlines. Effective communication with project managers, applicators, and quality control teams is essential to address issues quickly and maintain coating integrity. Navigating these challenges requires strong attention to detail, flexibility, and a proactive approach to problem-solving.

What is the difference between Coating Inspector vs NDT Technician?

AspectCoating InspectorNDT Technician
CertificationsSSPC, NACE, AWS certificationsASNT, NAS-410 certifications
Work EnvironmentIndustrial sites, construction, offshoreManufacturing, aerospace, oil & gas
Job FocusSurface preparation, coating application, inspectionMaterial testing, flaw detection, non-destructive testing
Industry UsageConstruction, maintenance, industrial coating projectsManufacturing, aerospace, power generation

While both roles involve inspection and testing, a Coating Inspector specializes in surface coatings, ensuring proper application and quality, whereas an NDT Technician focuses on non-destructive testing methods to detect flaws in materials. Both roles require specific certifications and are vital in industrial and construction sectors, but they serve different inspection purposes.

How much do coating inspectors make in the US?

Coating inspectors in the US typically earn between $40,000 and $70,000 annually, with the median around $55,000. Salaries vary based on experience, certifications, location, and industry, and inspectors often need knowledge of coating standards and inspection tools.

How much do coating inspectors make?

Coating inspectors typically earn between $40,000 and $70,000 annually, depending on experience, certifications, and location. Senior or specialized inspectors with certifications like NACE or SSPC can earn higher salaries, and the job often involves working in industrial or construction environments with safety protocols.

Is coating inspection a stressful job?

Coating inspection can be stressful due to the need for precision, attention to detail, and adherence to safety standards in often challenging environments. Inspectors must identify defects and ensure compliance, which can involve tight deadlines and working in conditions that may be physically demanding or hazardous.
More about Coating Inspector jobs

What are popular job titles related to Coating Inspector jobs in Iowa?

For Coating Inspector jobs in Iowa, the most frequently searched job titles are:

What job categories do people searching Coating Inspector jobs in Iowa look for?

The top searched job categories for Coating Inspector jobs in Iowa are:

What are popular job titles related to Coating Inspector jobs in IA?

For Coating Inspector jobs in IA, the most frequently searched job titles are:

Coating Inspector jobs near you
Infographic showing various Coating Inspector job openings in Iowa as of August 2026, with employment types broken down into 89% Full Time, and 11% Part Time. Highlights an 100% In-person job distribution, with an average salary of $63,987 per year, or $30.8 per hour.

Powder Coat/Paint Technician

Dalton Ag Products

Lenox, IA • On-site

$14.25 - $17.75/hr

Full-time

Posted 14 days ago

Job description

Dalton Ag is a brand forged in America's heartland and proud to be the premier fertilizer application equipment manufacturer since 1996.
As a paint/powder coating technician, you will be responsible for sanding, masking, and cleaning parts in preparation for powder coating operations. Technician is also responsible for performing sand-blasting and powder-coating techniques following written and verbal instructions while maintaining safety and quality standards.
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.
Requirements
Duties and Responsibilities
  • Prepare sandblasting, paint, or powder coating metal parts by sanding, masking, and cleaning
  • Complete sand-blasting and powder coat operations within a given time frame and according to written and verbal specifications.
  • Inspect components during and after processing to ensure quality standards.
  • Assist in maintenance, cleaning, and repair of equipment as assigned.
  • Keep all work areas, including the staging area, clean and organized

• Set up and operate a blast booth or similar equipment
• Load and unload the blast cabinet
• Apply and remove non-skid materials as needed
  • Ability to learn procedures, tasks, and operations through on-site training from a senior member of the staff.
  • Ability to follow both verbal and written instructions.
  • Ability to maintain consistent attendance.
  • Ability to maintain onsistent quality of work performed.

Knowledge, Skills, and Abilities:
• High school diploma or General education degree
• 1 or more years of manufacturing experience preferred
  • Basic computer skills
  • Ability to read, write and use basic math skills
  • Strong mechanical aptitude with the ability to follow precise instructions
  • Ability to communicate effectively with peers, managers and across departments

Physical Expectations:
The physical requirements described here are representative of an employee able to successfully perform the essential functions of the job. Reasonable accommodation will be considered to enable individuals with disabilities.
• Regularly required to stand, walk, and use hands to handle and feel objects, tools, or control
• Occasionally required to reach with hands and arms, stoop, bend, kneel, crouch, or crawl
• Regularly lift and/or move up to ten (10) pounds, frequently lift and/or move up to twenty-five pounds (25), and occasionally lift and/or move up to fifty (50) pounds
Working Conditions:
• Manufacturing environment
• Daily exposure to hot, cold, dusty, noisy environment
• Occasional to frequent outdoor work
• Potential to work at different area workstations to meet production needs
Required Personal Protective Equipment:
• Safety glasses
• Safety-toed shoes
• Hearing protection
• Face shields as needed
• Other PPE as required

Apply