ZipRecruiter

Log In

1

Coating Inspection Jobs in California (NOW HIRING)

Atln

Lead Coating Engineer

Richmond, CA · On-site

$101 - $178/hr

The Optical Coating Engineer leads the technical team and drives the design, development, and ... deposition, inspection, and characterization. The engineer also serves as the Process Owner ...

TEKBERRY

Quality Engineering Specialist

Santa Rosa, CA · On-site

$31 - $39/hr

Analyze manufacturing, coating, inspection, testing, and SPC data to identify trends and recommend process, equipment, and quality improvements. * Support product testing, troubleshooting, product ...

Tekberry

Quality Engineering Specialist

Santa Rosa, CA · On-site

$31 - $39/hr

Analyze manufacturing, coating, inspection, testing, and SPC data to identify trends and recommend process, equipment, and quality improvements. * Support product testing, troubleshooting, product ...

Lead Staffing

Paint Supervisor

Vallejo, CA · On-site

Partner with QA inspectors and client representatives during formal coating inspections. Candidate Qualifications Required * High School Diploma or GED. * 5+ years of journeyman-level marine or ...

L3 Harris

Quality Control Inspector Level C

San Diego, CA · On-site

$52K - $97K/yr

Verify process specification requirements. (e.g. conformal coating inspection). Required Qualifications (one of the following along with Secret Clearance): * High School Diploma or equivalent and a ...

L3 Harris

Quality Control Inspector Level C

San Diego, CA · On-site

$52K - $97K/yr

Verify process specification requirements. (e.g. conformal coating inspection). Required Qualifications (one of the following along with Secret Clearance): * High School Diploma or equivalent and a ...

L3 Harris

Quality Control Inspector Level C

San Diego, CA · On-site

$52K - $97K/yr

Verify process specification requirements. (e.g. conformal coating inspection). Required Qualifications (one of the following along with Secret Clearance): * High School Diploma or equivalent and a ...

L3 Harris

Quality Control Inspector Level C

Encinitas, CA · On-site

$52K - $97K/yr

Verify process specification requirements. (e.g. conformal coating inspection). Required Qualifications (one of the following along with Secret Clearance): * High School Diploma or equivalent and a ...

L3 Harris

Quality Control Inspector Level C

San Diego, CA · On-site

$52K - $97K/yr

Verify process specification requirements. (e.g. conformal coating inspection). Required Qualifications (one of the following along with Secret Clearance): * High School Diploma or equivalent and a ...

Emerald Technologies

Final Inspector - Level 2

Brea, CA · On-site

$23 - $24/hr

Also, inspection experience in the electronics manufacturing services (EMS)/printed circuit board ... Perform conformal coating inspections under both black light and white light to validate coverage ...

L3 Harris

Quality Control Inspector Level C

San Diego, CA · On-site

$52K - $97K/yr

Verify process specification requirements. (e.g. conformal coating inspection). Required Qualifications (one of the following along with Secret Clearance): * High School Diploma or equivalent and a ...

LEAD Staffing

Paint Supervisor

Vallejo, CA

Partner with QA inspectors and client representatives during formal coating inspections. Candidate Qualifications Required * High School Diploma or GED. * 5+ years of journeyman-level marine or ...

L3 Harris

Quality Control Inspector Level C

San Diego, CA · On-site

$52K - $97K/yr

Verify process specification requirements. (e.g. conformal coating inspection). Required Qualifications (one of the following along with Secret Clearance): * High School Diploma or equivalent and a ...

L3 Harris

Quality Control Inspector Level C

San Diego, CA · On-site

$52K - $97K/yr

Verify process specification requirements. (e.g. conformal coating inspection). Required Qualifications (one of the following along with Secret Clearance): * High School Diploma or equivalent and a ...

L3 Harris

Quality Control Inspector Level C

Del Mar, CA · On-site

$52K - $97K/yr

Verify process specification requirements. (e.g. conformal coating inspection). Required Qualifications (one of the following along with Secret Clearance): * High School Diploma or equivalent and a ...

previous page

Showing results 41-60

All JobsCoating Inspection JobsCoating Inspection Jobs in California

Coating Inspection information

What is coating inspection?

Coating inspection is the process of assessing protective coatings applied to surfaces such as steel or concrete to ensure they meet specified standards and provide adequate protection against corrosion and other environmental factors. Inspectors use a variety of tools and techniques to examine surface preparation, coating thickness, adhesion, and overall application quality. This process is critical in industries like oil and gas, construction, and manufacturing to extend the lifespan of structures and equipment, maintain safety, and comply with industry regulations.

What are the key skills and qualifications needed to thrive as a coating inspector, and why are they important?

To thrive as a Coating Inspector, you need a solid understanding of coating application methods, surface preparation standards, and common industry specifications, often supported by certifications like NACE or SSPC. Familiarity with inspection tools such as dry film thickness gauges, holiday detectors, and documentation systems is crucial. Attention to detail, strong observational skills, and effective communication help ensure accurate reporting and collaboration with project teams. These skills are vital for maintaining quality standards, ensuring compliance, and preventing costly failures in coating projects.

What are some common challenges faced by coating inspectors during large-scale projects, and how can they be addressed?

Coating inspectors often encounter challenges such as working in difficult environmental conditions, coordinating with multiple contractors, and ensuring strict adherence to project specifications. Managing varying surface preparation standards and overcoming communication gaps between the inspection team and applicators are also common. These challenges can be addressed by staying up-to-date with industry standards, maintaining clear documentation, and fostering strong communication with all project stakeholders to ensure high-quality and compliant results.

What is the difference between Coating Inspection vs NDT (Non-Destructive Testing)?

AspectCoating InspectionNDT (Non-Destructive Testing)
CertificationsSSPC, NACE, AWS coatings certificationsASNT, AWS NDT certifications
Work EnvironmentIndustrial sites, construction, manufacturingIndustrial, aerospace, oil & gas, manufacturing
Primary FocusAssessing coating quality, thickness, adhesionDetecting flaws, cracks, or defects without damage

Coating Inspection primarily involves evaluating the quality and application of protective coatings, focusing on thickness, adhesion, and surface preparation. NDT, on the other hand, involves testing materials for internal or surface flaws without causing damage. While both roles require specialized certifications and are used in industrial settings, they serve different purposes: coating inspectors ensure coatings are properly applied, whereas NDT technicians detect hidden defects in materials.

How much do coating inspectors make in the US?

Coating inspectors in the US typically earn between $40,000 and $70,000 annually, depending on experience, certifications, and location. Entry-level inspectors may start around $35,000, while experienced professionals with certifications like NACE or SSPC can earn over $80,000. The job often requires knowledge of inspection tools and safety protocols.

How to become a coating inspection?

To become a coating inspector, typically one needs a high school diploma or equivalent, along with specialized training in coating technologies and inspection methods. Certification such as the NACE CIP (Coating Inspector Program) or SSPC certifications are often required or preferred, and gaining experience in surface preparation, coating application, and quality control is valuable. Strong attention to detail, knowledge of safety standards, and familiarity with inspection tools are essential for success in this role.

Is coating inspection a stressful job?

Coating inspection can be stressful due to the need for precision and attention to detail when assessing surface quality and adherence to standards. Inspectors often work in challenging environments, such as outdoors or at heights, and must meet strict deadlines, which can contribute to job-related stress. However, the role also offers clear procedures and training to help manage workload and expectations.

What are popular job titles related to Coating Inspection jobs in California?

For Coating Inspection jobs in California, the most frequently searched job titles are:

What job categories do people searching Coating Inspection jobs in California look for?

The top searched job categories for Coating Inspection jobs in California are:

What cities in California are hiring for Coating Inspection jobs?

Cities in California with the most Coating Inspection job openings:

Coating Inspection jobs near you
Infographic showing various Coating Inspection job openings in California as of August 2026, with employment types broken down into 82% Full Time, 12% Part Time, 4% Contract, and 2% Nights. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution.

Quality Control Inspector Level C

Harris Geospatial Solutions

San Diego, CA • On-site

$55 - $75/hr

Other

This job post has expired 3 days ago. Applications are no longer accepted.

Job description

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Quality Control Inspector Level C

Job Code: 37827

Job Location: San Diego, CA

Job Schedule: 9/80 (employee's work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off)

Job Description

Responsible for inspecting materials, equipment and assemblies; interpreting manufacturing drawings and specifications; validation of products and documentation for compliance; and preparing items for customers’ acceptance.

Review records for completeness, including Production Order and Engineering Changes.

Inspection support includes CCAs, Modules, Cable inspection as well as test readiness activities and test monitoring.

Essential Functions
  • Inspect per IPC, ESD, Solder, CCA inspection, module, and chassis level inspection experience.
  • Verifying previous operations are completed and accepted.
  • Performed visual inspection of electrical assemblies to standards.
  • Document non-conformances and take photos of discrepancies
  • Visual inspections of hardware using microscopes and magnifying lens. Verify process specification requirements. (e.g. conformal coating inspection).
Required Qualifications

one of the following along with Secret Clearance:

  • High School Diploma or equivalent and a minimum of 6 years of prior relevant experience
  • 2 years post-Secondary/Associates Degree with a minimum of 2 years of prior related experience.
  • Security Clearance required.
Preferred Additional Skills
  • Must be able to interpret/follow documents such as: Drawings, Procedures, Engineering Change (ECO) Production Orders and work instructions.
  • Knowledgeable of assembly practices and requirements.
  • Interface with Engineering, Production, Planning, Quality Engineering and Customers.
  • Experience with J-STD-001 and/or IPC-610 and IPC-620 requirement.
  • Experience in mechanical inspections utilizing inspection tools (calipers, pin gages, etc)
  • Proficient in Microsoft Office Applications
  • Certified to IPC-A-600
  • Certified to IPC-A-610
  • Certified to IPC/WHMA-A-620
  • J-STD-001
  • Experience working in the Inspection department inspecting CCA’s, cable assemblies and complex sub- assemblies.

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

#J-18808-Ljbffr

Apply