ZipRecruiter

Log In

1

Certified Welding Inspector Jobs in Decatur, AL (NOW HIRING)

Blue Origin

Aerospace Welding

Huntsville, AL

$35.25 - $48.50/hr

Perform second party verifications and hardware inspections to engineering models, drawings ... Industry certification, trade school training and/or degree in related field. * 3+ years of ...

Blue Origin, LLC

Pipe Welder II

Huntsville, AL · On-site

$25.50 - $31.50/hr

... inspector * Setting up and maintaining GTAW welding equipment - selecting correct filler wire ... Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of ...

Blue Origin

Pipe Welder II

Huntsville, AL · On-site

$25.50 - $31.50/hr

... inspector * Setting up and maintaining GTAW welding equipment - selecting correct filler wire ... Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of ...

Blue Origin

Pipe Welder - C Shift (All Levels)

Huntsville, AL · On-site

$25.50 - $31.50/hr

Performing visual self-inspection of completed welds against workmanship standards; identifying and ... AWS D17.1 awareness or entry-level GTAW certification on any material group * Exposure to welding ...

Blue Origin

Manual Welding - Rocket Engines

Huntsville, AL · On-site

$35.25 - $48.50/hr

Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of ... vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials ...

United Launch Alliance

Weld Engineer 1

Decatur, AL · On-site

$32 - $44/hr

... inspections, supporting weld tool design, and implementing weld process improvements. * Experience ... Experience training and certifying technicians in friction stir welding (FSW), resistance spot ...

United Launch Alliance

Weld Engineer 1

Decatur, AL · On-site

$32 - $44/hr

... inspections, supporting weld tool design, and implementing weld process improvements. * Experience ... Experience training and certifying technicians in friction stir welding (FSW), resistance spot ...

Hardy

Pipe Welder

Huntsville, AL · On-site

$26.25 - $32.25/hr

Conduct visual inspections of completed welds; correct deficiencies as needed. Maintain proper ... Preferred AWS welding certification (or ability to pass weld test). Experience in industrial ...

Hardy Corp

Pipe Welder

Huntsville, AL · On-site

$26.25 - $32.25/hr

Preferred · AWS welding certification (or ability to pass weld test). · Experience in industrial ... control and inspection requirements on federal job sites. WORKING CONDITIONS: · Jobsite ...

Hardy Corp

Pipe Welder

Huntsville, AL · On-site

$26.25 - $32.25/hr

Preferred • AWS welding certification (or ability to pass weld test). • Experience in ... control and inspection requirements on federal job sites. WORKING CONDITIONS: • Jobsite ...

Topre America Corporation

Quality Inspector

Cullman, AL · On-site

$20.33 - $22.38/hr

Quality checks including SME, LMI, and visual inspection. * Assists in containment of suspect ... and weld assemblies. By applying these core technologies, we now supply a variety of high ...

Red-D-Arc

Welder technician

Huntsville, AL · On-site

$18.50 - $24.50/hr

Ability to inspect, troubleshoot, and perform basic repairs on welding equipment, generators, and ... Relevant welding certifications (e.g., AWS or equivalent) are beneficial. * Ability to work on-site ...

BASF Catalysts

DOT-FAA Fabricator 1

Huntsville, AL · On-site

$25 - $35/hr

Ability to perform basic visual weld inspections. * Ability to read and translate prints, drawings ... Preferred experience or previous weld certifications of AWS D17.1 standards. * Preferred experience ...

previous pagenext page

Showing results 21-40

All JobsCertified Welding Inspector JobsCertified Welding Inspector Jobs in Decatur, AL

Certified Welding Inspector information

See Decatur, AL salary details

$14

$29

$42

How much do certified welding inspector jobs pay per hour?

As of Sep 13, 2026, the average hourly pay for certified welding inspector in Decatur, AL is $29.97, according to ZipRecruiter salary data. Most workers in this role earn between $25.48 and $34.47 per hour, depending on experience, location, and employer.

What is a certified welding inspector?

A Certified Welding Inspector (CWI) is a professional who is trained and certified to inspect welds and ensure they meet specific codes, standards, and safety requirements. CWIs play a crucial role in industries such as construction, manufacturing, and shipbuilding by verifying the quality and integrity of welded structures. They are responsible for conducting visual inspections, reviewing documents, performing tests, and documenting their findings. Achieving CWI certification typically requires passing a comprehensive exam and meeting experience or education requirements. This certification is widely recognized and valued in the welding industry.

What does a certified welding inspector do?

Metal structures, such as steel fences and pipelines, are constructed through a welding process. A Certified Welding Inspector, or CWI, ensures that these structures are welded properly. The CWI checks the structure for defects, uses specialized stress equipment to test for durability, and performs re-inspections.

What are the key skills and qualifications needed to thrive as a certified welding inspector?

To thrive as a Certified Welding Inspector, you need a strong understanding of welding processes, metallurgy, blueprint reading, and quality assurance, typically validated by an AWS CWI certification. Familiarity with inspection tools like calipers, micrometers, and non-destructive testing (NDT) equipment is also essential. Attention to detail, strong communication, and problem-solving skills are important soft skills for accurately documenting findings and collaborating with teams. These competencies ensure weld quality, compliance with safety standards, and the integrity of structures in various industries.

What are some common challenges certified welding inspectors face in maintaining quality standards on job sites?

Certified Welding Inspectors often encounter challenges such as balancing tight project deadlines with thorough inspection processes, communicating technical requirements to both welders and management, and ensuring compliance with complex codes and standards. They must also address discrepancies in welding practices and documentation, sometimes under pressure from production demands. Effective inspectors rely on strong attention to detail and interpersonal skills to maintain safety and quality while fostering teamwork across departments.

What is the difference between Certified Welding Inspector vs Welding Inspector?

CriteriaCertified Welding InspectorWelding Inspector
CertificationsAWS CWI certification requiredMay not require certification, but often preferred
Work EnvironmentInspecting welds in manufacturing, construction, and industrial settingsPerforming visual inspections, quality checks, and documentation
Industry UsageCommonly employed in industries requiring certified weld qualityUsed broadly in various welding-related roles, sometimes without certification

The main difference is that a Certified Welding Inspector holds an AWS CWI certification, indicating a higher level of qualification and expertise. While both roles involve inspecting welds, the Certified Welding Inspector is recognized for meeting specific certification standards, making them more suitable for compliance and quality assurance in regulated industries.

Are certified welding inspectors in demand?

Certified welding inspectors are in high demand across industries such as construction, manufacturing, and energy due to the need for quality control and safety compliance. Their expertise in welding codes, inspection techniques, and certifications like AWS CWI make them valuable for ensuring structural integrity and regulatory adherence.

How long does it take to become a Certified Welding Inspector?

Becoming a Certified Welding Inspector (CWI) typically requires completing a combination of education, work experience, and passing the AWS CWI exam. The process can take from several months to a few years, depending on prior experience and training, with many candidates preparing through specialized courses and gaining at least 3-4 years of welding-related work experience before certification.

How much can you make if you have a Certified Welding Inspector?

A Certified Welding Inspector typically earns between $50,000 and $80,000 annually, depending on experience, location, and industry. Senior inspectors or those working in high-demand sectors can earn higher salaries, especially with additional certifications or specialized skills.
More about Certified Welding Inspector jobs

What are the most commonly searched types of Certified Welding Inspector jobs in Decatur, AL?

The most popular types of Certified Welding Inspector jobs in Decatur, AL are:

What are popular job titles related to Certified Welding Inspector jobs in Decatur, AL?

For Certified Welding Inspector jobs in Decatur, AL, the most frequently searched job titles are:

What job categories do people searching Certified Welding Inspector jobs in Decatur, AL look for?

The top searched job categories for Certified Welding Inspector jobs in Decatur, AL are:

What cities near Decatur, AL are hiring for Certified Welding Inspector jobs?

Cities near Decatur, AL with the most Certified Welding Inspector job openings:

Certified Welding Inspector jobs near you
Infographic showing various Certified Welding Inspector job openings in Decatur, AL as of September 2026, with employment types broken down into 2% As Needed, 72% Full Time, 20% Part Time, and 6% Contract. Highlights an 95% Physical, 1% Hybrid, and 4% Remote job distribution, with an average salary of $62,333 per year, or $30 per hour.

Welder

Huntsville, AL • On-site

Science and Engineering Services, LLC
See more jobs at Science and Engineering Services, LLCexternal

$18.50 - $24.50/hr

Full-time

This job post has expired 3 days ago. Applications are no longer accepted.

Job description

Overview
The Welder performs welding on aircraft and ground support equipment while following Welding Procedures Specifications (WPS).
Responsibilities
  • Performs fusion welding on aircraft and ground support equipment to a qualified Welding Procedures Specification (WPS).
  • Performs structural fusion welding on parts and components per the requirements of specifications as prescribed by Engineering Drawings and Work Orders
  • Reads and understands engineering drawings and welding symbols, fabricates manufacture-welded parts from engineering drawing without direct supervision
  • Performs fusion welding and torch brazing for ground support equipment, ensuring the procedure is completed per the requirements of the national welding and brazing codes and specifications.
  • Welds a wide variety of materials such as aluminum, magnesium, alloyed and low alloy steel, stainless steel and nickel alloy steels.
  • The incumbent is required to have knowledge of the materials to select the correct filler materials and shielding gas when generating the Weld Procedure Specification (WPS)
  • Required to produce flight critical welds
  • The Welder determines the sequence of welding in order to prevent or reduce the amount of warp to the weld.
  • Designs and fabricates weld holding fixtures as necessary to perform individual welding projects
  • Performs pre-heat and post weld stress relief operations
  • Maintains weld records
  • The incumbent may perform duties as a Qualified Weld Inspector by inspecting own welds and those of less qualified welders
  • May perform duties such as training and re-certification in the various welding processes
  • Performs other duties as assigned

Qualifications
Education:
  • High School Diploma or GED required
  • Technical or Military school preferred

Experience:
  • at least two years of Welding-related experience required

Any combination of education/experience may be substituted for job requirements at the recommendation of the hiring manager and approval of the COO or higher.

Apply