ZipRecruiter

Log In

1

Certified Welding Inspector Contract Jobs in Decatur, AL

Blue Origin

Aerospace Welding

Huntsville, AL

$35.25 - $48.50/hr

Perform second party verifications and hardware inspections to engineering models, drawings ... Industry certification, trade school training and/or degree in related field. * 3+ years of ...

Pae

Aerospace Welding Engineer, Senior (SME1)

Huntsville, AL · On-site

$35.25 - $48.50/hr

... contract to the NASA MSFC Engineering Directorate. The primary focus of this position is ... Direct and coordinate technical personnel in performing inspections to ensure workers' compliance ...

Blue Origin, LLC

Pipe Welder II

Huntsville, AL · On-site

$25.50 - $31.50/hr

... inspector * Setting up and maintaining GTAW welding equipment - selecting correct filler wire ... Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of ...

Blue Origin

Pipe Welder II

Huntsville, AL

$25.50 - $31.50/hr

... inspector * Setting up and maintaining GTAW welding equipment - selecting correct filler wire ... Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of ...

Blue Origin

Pipe Welder - C Shift (All Levels)

Huntsville, AL

$25.50 - $31.50/hr

Performing visual self-inspection of completed welds against workmanship standards; identifying and ... AWS D17.1 awareness or entry-level GTAW certification on any material group * Exposure to welding ...

Blue Origin

Manual Welding - Rocket Engines

Huntsville, AL

$35.25 - $48.50/hr

Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of ... vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials ...

New

United Launch Alliance

Weld Engineer 1

Decatur, AL · On-site

$32 - $44/hr

... inspections, supporting weld tool design, and implementing weld process improvements. * Experience ... Experience training and certifying technicians in friction stir welding (FSW), resistance spot ...

United Launch Alliance

Weld Engineer 1

Decatur, AL · On-site

$32 - $44/hr

... inspections, supporting weld tool design, and implementing weld process improvements. * Experience ... Experience training and certifying technicians in friction stir welding (FSW), resistance spot ...

Simtechinc

Welder II, Mid-Level

Huntsville, AL · On-site

$55 - $75/hr

... DoD contract requirements. This position involves performing GTAW and GMAW welding processes ... Currently or previously held certification to AWS and DoD standards. * Proficient in GTAW (TIG) and ...

Hardy

Pipe Welder

Huntsville, AL

$26.25 - $32.25/hr

Conduct visual inspections of completed welds; correct deficiencies as needed. Maintain proper ... Preferred AWS welding certification (or ability to pass weld test). Experience in industrial ...

Hardy Corp

Pipe Welder

Huntsville, AL · On-site

$26.25 - $32.25/hr

Preferred · AWS welding certification (or ability to pass weld test). · Experience in industrial ... control and inspection requirements on federal job sites. WORKING CONDITIONS: · Jobsite ...

Hardy Corp

Pipe Welder

Huntsville, AL · On-site

$26.25 - $32.25/hr

Preferred · AWS welding certification (or ability to pass weld test). · Experience in industrial ... control and inspection requirements on federal job sites. WORKING CONDITIONS: · Jobsite ...

previous pagenext page

Showing results 21-40

All JobsCertified Welding Inspector Contract JobsCertified Welding Inspector Contract Jobs in Decatur, AL

Certified Welding Inspector Contract information

See Decatur, AL salary details

$14

$29

$42

How much do certified welding inspector contract jobs pay per hour?

As of Sep 5, 2026, the average hourly pay for certified welding inspector contract in Decatur, AL is $29.97, according to ZipRecruiter salary data. Most workers in this role earn between $25.48 and $34.47 per hour, depending on experience, location, and employer.

What is a certified welding inspector contract?

A Certified Welding Inspector (CWI) contract position involves hiring a qualified professional on a temporary or project-specific basis to inspect and ensure the quality of welding work according to specific codes and standards. CWIs are responsible for examining welds, reviewing procedures, documenting compliance, and sometimes training other workers. Contract CWIs may work for construction companies, fabrication plants, or inspection agencies, and their assignments can range in duration from short-term projects to longer contracts, depending on the employer's needs.

What are the key skills and qualifications needed to thrive as a certified welding inspector on a contract basis?

To excel as a Certified Welding Inspector (CWI), you need a thorough understanding of welding processes, codes, and standards, validated by AWS CWI certification and relevant technical education. Familiarity with inspection tools, nondestructive testing (NDT) methods, and reporting systems is essential. Attention to detail, integrity, and strong communication skills help you effectively document findings and coordinate with project teams. These competencies ensure weld quality, safety compliance, and successful project delivery in demanding contract environments.

What are some common challenges faced by certified welding inspectors working on contract assignments?

Certified Welding Inspectors on contract often encounter challenges such as adapting quickly to new project sites and varying company standards. They must efficiently interpret different welding codes and procedures for each assignment, and frequently balance multiple tasks like documentation, site inspections, and quality assurance. Additionally, contract roles may require managing tight deadlines and building effective communication with diverse teams, including welders, engineers, and project managers. These challenges can be rewarding, offering exposure to a wide range of industries and opportunities to develop specialized expertise.

What is the difference between Certified Welding Inspector Contract vs Certified Welding Inspector?

AspectCertified Welding Inspector ContractCertified Welding Inspector
CertificationsRequires AWS CWI certificationRequires AWS CWI certification
Work EnvironmentTemporary or project-based inspections, often on-sitePermanent or long-term inspections, on-site or office-based
Employer UsageHired by companies or contractors for specific projectsEmployed directly by companies or agencies

The main difference is that a Certified Welding Inspector Contract typically works on a temporary, project-specific basis, while a Certified Welding Inspector may have a permanent position. Both roles require the same certification but differ in employment type and work setup.

Are certified welding inspectors in demand?

Certified welding inspectors are in high demand across industries such as construction, manufacturing, and energy due to the need for quality assurance and safety compliance. Their expertise in welding codes, inspection tools, and certifications makes them valuable for ensuring structural integrity and regulatory adherence.

What can I do with a Certified Welding Inspector Contract certification?

A Certified Welding Inspector (CWI) contract allows individuals to perform quality inspections of welded structures, ensure compliance with industry standards, and verify weld integrity. CWIs often work in construction, manufacturing, and fabrication environments, using tools like ultrasonic and radiographic testing, and may be involved in overseeing welding processes and documenting inspection results.

What are the most commonly searched types of Certified Welding Inspector jobs in Decatur, AL?

The most popular types of Certified Welding Inspector jobs in Decatur, AL are:

What are popular job titles related to Certified Welding Inspector Contract jobs in Decatur, AL?

For Certified Welding Inspector Contract jobs in Decatur, AL, the most frequently searched job titles are:

What job categories do people searching Certified Welding Inspector Contract jobs in Decatur, AL look for?

The top searched job categories for Certified Welding Inspector Contract jobs in Decatur, AL are:

Certified Welding Inspector Contract jobs near you
Infographic showing various Certified Welding Inspector Contract job openings in Decatur, AL as of August 2026, with employment types broken down into 3% As Needed, 76% Full Time, 15% Part Time, and 6% Contract. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution, with an average salary of $62,333 per year, or $30 per hour.

Welder

Science and Engineering Services, LLC

Huntsville, AL

$18.50 - $24.50/hr

Full-time

Re-posted 23 days ago

Job description

Overview

The Welder performs welding on aircraft and ground support equipment while following Welding Procedures Specifications (WPS).

Responsibilities
  • Performs fusion welding on aircraft and ground support equipment to a qualified Welding Procedures Specification (WPS).
  • Performs structural fusion welding on parts and components per the requirements of specifications as prescribed by Engineering Drawings and Work Orders
  • Reads and understands engineering drawings and welding symbols, fabricates manufacture-welded parts from engineering drawing without direct supervision
  • Performs fusion welding and torch brazing for ground support equipment, ensuring the procedure is completed per the requirements of the national welding and brazing codes and specifications.
  • Welds a wide variety of materials such as aluminum, magnesium, alloyed and low alloy steel, stainless steel and nickel alloy steels.
  • The incumbent is required to have knowledge of the materials to select the correct filler materials and shielding gas when generating the Weld Procedure Specification (WPS)
  • Required to produce flight critical welds
  • The Welder determines the sequence of welding in order to prevent or reduce the amount of warp to the weld.
  • Designs and fabricates weld holding fixtures as necessary to perform individual welding projects
  • Performs pre-heat and post weld stress relief operations
  • Maintains weld records
  • The incumbent may perform duties as a Qualified Weld Inspector by inspecting own welds and those of less qualified welders
  • May perform duties such as training and re-certification in the various welding processes
  • Performs other duties as assigned
Qualifications

Education:

  • High School Diploma or GED required
  • Technical or Military school preferred

Experience:

  • at least two years of Welding-related experience required

Any combination of education/experience may be substituted for job requirements at the recommendation of the hiring manager and approval of the COO or higher.

Employment Type: FULL_TIME

Apply