ZipRecruiter

Log In

1

Ccst Jobs in Texas (NOW HIRING)

ON.energy

Principal Product Controls Engineer

Houston, TX

$79K - $103K/yr

ISA CAP/CCST, Rockwell, Siemens, Schneider or similar * Experience withBESS, SCADA, EMS, Safety Systems or utility-scale infrastructure * Background in energy, utility, or data center environments

VIVA USA INC

NOC Technician

Allen, TX · On-site

Network+, Cisco CCST/CCNA. ITIL Certification. Experience with AWS Cloud surveillance. Key Responsibilities Network monitoring and response. Technical support. Outage support. Top Contributions ...

FST Technical Services

I&C Electrical Inspector

Taylor, TX · On-site

$35 - $52/hr

Electrical Inspector certification (e.g., ICC, IAEI) or Instrumentation Technician certification (e.g., ISA CCST, NICET). * OSHA 10/30 certification or equivalent safety training. * Experience with ...

FST Technical Services

I&C Electrical Inspector

Taylor, TX · On-site

$35 - $52/hr

Electrical Inspector certification (e.g., ICC, IAEI) or Instrumentation Technician certification (e.g., ISA CCST, NICET). * OSHA 10/30 certification or equivalent safety training. * Experience with ...

Zachry Group

Safety Facilitator

TX · On-site

Must have CCST. * Previous maintenance/TAR experience preferred. * Must be able to meet all physical requirements. * Must be able to work at heights in excess of 300 ft. * Must have all required ...

INEOS

Technician-I&E

Alvin, TX · On-site

... CCST) Program or equivalent certification. AND All applicants MUST be able to acquire a TWIC card Our culture is one of honesty and integrity with an emphasis on safety, health and environmental ...

Ineos

Technician-I&E

Alvin, TX · On-site

... CCST) Program or equivalent certification. AND All applicants MUST be able to acquire a TWIC card Our culture is one of honesty and integrity with an emphasis on safety, health and environmental ...

tra

ICS Automation Analyst II

Huntsville, TX · On-site

CERTIFICATES, LICENSES, REGISTRATIONS • Valid driver's license. • ISA CCST (Certified Control Systems Technician) Analyst Level II required or equivalent. • Additional certifications such as ...

Ineos

Maintenance I&E Technician

Stratton, TX · On-site

$22.25 - $28.50/hr

... CCST) Program or equivalent certification. AND * All applicants MUST be able to acquire a TWIC card Our culture is one of honesty and integrity with an emphasis on safety, health and environmental ...

next page

Showing results 1-20

All JobsCcst JobsCcst Jobs in Texas

Ccst information

See Texas salary details

$26.1K

$56.7K

$84.8K

How much do ccst jobs pay per year?

As of Aug 15, 2026, the average yearly pay for ccst in Texas is $56,677.00, according to ZipRecruiter salary data. Most workers in this role earn between $45,700.00 and $64,300.00 per year, depending on experience, location, and employer.

What does a CCST do?

A CCST is primarily responsible for installing, maintaining, calibrating, and troubleshooting control systems and instrumentation within industrial plants or facilities. Each day may involve inspecting equipment, conducting preventive maintenance, interpreting technical drawings, and responding to system alerts or production issues. Additionally, CCSTs often collaborate with engineers, operators, and other technicians to implement upgrades or resolve process problems. Staying organized, safety-conscious, and responsive is key to effectively balancing urgent repairs with regular system checks.

What is a CCST?

A CCST (Certified Control Systems Technician) job involves installing, maintaining, troubleshooting, and calibrating automation and control systems in industries like manufacturing, energy, and pharmaceuticals. CCSTs work with instruments that measure and control process variables such as temperature, pressure, and flow. They ensure these systems operate efficiently and accurately to maintain safety and production quality. Certification from the ISA (International Society of Automation) is commonly pursued to demonstrate expertise in this field.

What are the key skills and qualifications needed to thrive as a CCST?

To excel as a Certified Control Systems Technician (CCST), you typically need strong knowledge of industrial automation, instrumentation, process control, and troubleshooting, supported by an associate’s degree or technical training. Proficiency with Programmable Logic Controllers (PLCs), Distributed Control Systems (DCS), and CCST certification from ISA are often required. Teamwork, problem-solving, attention to detail, and effective communication help CCSTs succeed in dynamic industrial environments. These skills ensure reliable system performance and safety while minimizing downtime in operations.

What are the most commonly searched types of Ccst jobs in Texas?

The most popular types of Ccst jobs in Texas are:

What are popular job titles related to Ccst jobs in Texas?

For Ccst jobs in Texas, the most frequently searched job titles are:

What job categories do people searching Ccst jobs in Texas look for?

The top searched job categories for Ccst jobs in Texas are:

What cities in Texas are hiring for Ccst jobs?

Cities in Texas with the most Ccst job openings:

Ccst jobs near you
Infographic showing various Ccst job openings in Texas as of August 2026, with employment types broken down into 67% Full Time, and 33% Contract. Highlights an 100% In-person job distribution, with an average salary of $56,677 per year, or $27.2 per hour.

HVAC Instrumentation Technician - Austin Industrial (Taylor, TX)

Austin Industries

Taylor, TX • On-site

$37K - $43K/yr

Full-time

Posted 26 days ago

Austin Industries rating

7.2

Company rating: 7.2 out of 10

Based on 57 frontline employees who took The Breakroom Quiz

46th of 80 rated construction

Job description

HVAC Instrumentation Technician
The Journey Level Senior Technician is responsible for performing technical tasks in support of the operation and maintenance of utility systems, Fab support equipment, building maintenance or chemical and gas delivery equipment. Activities include support in execution of construction, design and specification documentation, the startup and operation of facilities, mechanical, chemical, waste and electrical systems. In addition, performs preventive maintenance and repair as required while logging equipment inefficiencies. Requires compliance with all health, safety and environmental management system guidelines.
  • Troubleshooting: Responds to All Equipment and asset failures to support expedited return to service
  • Technical Leader: Contributes to the development of business practices and techniques
  • Coaching: Coaches Junior Level Technicians on the expectations of work execution Quality and Safety
  • Innovator: Makes recommendations for new technologies and innovative system improvements in support of both in house and capital projects
  • Commissioning: Ensures all project installations meet site specifications and are aligned with process spec
  • Training: Contributes to training development that supports Technician skill growth
  • QA/QC: Constantly monitors overall PM execution and reports back to Supervisor

Essential Responsibilities
  • Receives some direction from Master Technician/TRs/Supervisors to prioritize non-routine daily tasks and/or projects.
  • Supports execution of new assignment/projects based on the need of the department.
  • Must have expert understanding of equipment/processes.
  • Should demonstrate a deep level adaptability and the ability to change priorities based on the business needs.
  • May provide mentoring to Junior Level Technicians.
  • Has advanced understanding of SOPs.
  • Works on high priority assignment that require a considerable amount of judgment and initiative.
  • Completes tasks in innovative and effective ways.

  • Performs Advanced Preventative/Corrective Maintenance: Tasked with completing PM/CPM improvement projects.
  • Identifies areas of business process improvement opportunities and provides input as to which improvement projects need to be pursued.
  • Troubleshoots complex issues that lower level technicians are unable to resolve.
  • Decides which type of maintenance is needed, selects parts for replacement.
  • Reviews and submits vendor invoices and payments.
  • Coaches and train trains lower level technicians as needed.
  • Networks with Master Tech, Operations, Engineering and controls to successfully facilitate completion of all activities assigned.
  • May attend meetings to provide pass down for oncoming shifts.
  • May participate on cross-functional teams.
  • May conduct routine inspections and investigations.
  • Interprets complex data from equipment, processes etc.
  • Applies knowledge of relevant best practices, state and local code in area of expertise.
  • Regular attendance and timeliness is required per departmental guidelines.
  • Intermediate knowledge of relevant code regulations and ability to work independently within the broad scope of an objective.
  • May require the ability to maintain a state license or certification as necessary (i.e., Journeyman License or CCST).
  • Applicants must be legally able to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of employment visa for this position.

Favorable Certs
  • CCST Level I/II
  • NCCER+
  • Electrical License

Training/School
  • HS Diploma or GED
  • Trade School Diploma or Cert of Comp

Equipment Specific Training Certificates
Physical, Mental & Environmental Requirements
Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of this position.
Employees must be able to sit, stand, walk, climb, balance, stoop, kneel, crouch, crawl, reach, and use hands and fingers to perform assigned duties. Positions may require lifting, carrying, pushing, or pulling up to 50 pounds, working at elevations, on uneven surfaces, or in confined spaces. Employees must possess sufficient visual, hearing, communication, and motor skills to safely perform job responsibilities.
Employees must be able to read, comprehend, and follow safety procedures, work instructions, and company policies; exercise sound judgment; solve problems; maintain attention to detail; effectively manage stress; and adapt to changing priorities in a fast-paced work environment.
Work may be performed in industrial and construction environments with exposure to weather conditions, temperature extremes, noise, dust, fumes, moving equipment, vibration, and other site-specific hazards. Employees must be able to wear required personal protective equipment (PPE) and meet all customer, site, regulatory, medical, and fitness-for-duty requirements applicable to the position.
Must be able to perform all job duties while maintaining a constant commitment to safety, quality, and productivity expectations.
Austin Industrial is an Equal Opportunity Employer.
See the "Know Your Rights" poster available in English and Spanish.
No Third-Party Inquiries Please
This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (i.e., payment must be required pursuant to the terms of a written agreement).
Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company.
Accessibility Note
If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at (877) 831-1217.
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights notice from the Department of Labor.

What Austin Industries employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply