ZipRecruiter

Log In

1

Cat Jobs in Raleigh, NC (NOW HIRING)

Morgan Corp.

Soil Stabilization Mixer

Raleigh, NC

$15 - $19.50/hr

The Mixer Operators are responsible for the safe and efficient operation of a stabilization mixer (Wirtgen 240i, 250i or CAT RM400, RM500) used in construction, moisture conditioning, lime ...

Comforted Canine

Dog Sitter

Raleigh, NC · On-site

$25/hr

The Comforted Kitty is looking for reliable, responsible pet lovers to provide in-home dog or cat sitting visits and dog walking while clients are away. This is a flexible, part-time independent ...

Comforted Canine

Dog Sitter

Durham, NC · On-site

$25/hr

The Comforted Kitty is looking for reliable, responsible pet lovers to provide in-home dog or cat sitting visits and dog walking while clients are away. This is a flexible, part-time independent ...

Infojini Inc

Cable Technician

Raleigh, NC

$19.50 - $24.75/hr

Termination and testing of Cat 5/6 network cabling as well as fiber optic cabling. * Responsible for installation of network switches and related network equipment. * Knowledge of troubleshooting ...

Pet Supplies Plus

Store Manager

Durham, NC

Overview Does your cat wear sunglasses? Does your dog have more sweaters than you? If you're the leader of the pack and enjoy providing products and services that enrich pets' lives, then come work ...

Pet Supplies Plus

Store Manager

Durham, NC

Does your cat wear sunglasses? Does your dog have more sweaters than you? If you're the leader of the pack and enjoy providing products and services that enrich pets' lives, then come work in our ...

Pet Supplies Plus

Store Manager

Durham, NC · On-site

Overview Does your cat wear sunglasses? Does your dog have more sweaters than you? If you're the leader of the pack and enjoy providing products and services that enrich pets' lives, then come work ...

WakeMed

Travel CT Technologist- $85 Per Hour

Raleigh, NC · On-site

$85/hr

Overview The Imaging Services department has the state-of-the-art computerized tomography equipment and the CAT Scan Technologists provides quality images of designated portions of the body under the ...

previous pagenext page

Showing results 21-40

All JobsCat JobsCat Jobs in Raleigh, NC

Cat information

What are some careers that involve cats?

Careers involving cats include veterinary technician, animal shelter worker, cat behaviorist, and professional pet groomer. These roles often require knowledge of feline health, behavior, and handling, and may involve working in clinics, shelters, or private settings.

Invalid job title: 'Cat' is not a recognized real-world professional occupation.

Please provide a valid job title for an actual professional occupation to receive a relevant FAQ.

What is the difference between Cat vs Dog?

AspectCatDog
Required CredentialsNone specific, basic animal care knowledgeBasic animal care knowledge, sometimes certifications for training
Work EnvironmentIndoor or outdoor, independentIndoor, outdoor, social
Industry UsagePet care, animal shelter, veterinary supportPet care, service industry, therapy roles

Both cats and dogs are common pets requiring basic animal care skills. Cats tend to be more independent and suited for indoor environments, while dogs often need more social interaction and outdoor activity. Their roles overlap in pet care and animal support industries, but their care needs and behaviors differ significantly.

What are popular job titles related to Cat jobs in Raleigh, NC? For Cat jobs in Raleigh, NC, the most frequently searched job titles are:
What job categories do people searching Cat jobs in Raleigh, NC look for? The top searched job categories for Cat jobs in Raleigh, NC are:
What cities near Raleigh, NC are hiring for Cat jobs? Cities near Raleigh, NC with the most Cat job openings:
Cat jobs near you
Infographic showing various Cat job openings in Raleigh, NC as of August 2026, with employment types broken down into 73% Full Time, 16% Part Time, and 11% Contract. Highlights an 100% In-person job distribution.

Master Technician - Senior Start Up

Gregory Poole Equipment Company

Garner, NC • On-site

Part-time

Re-posted 19 days ago

Job description

Primary Function
The Master Technician- Senior Start Up will commission, program, optimize small and large CAT generator systems and integrate them with site power infrastructure, including ATS, switchgear, paralleling equipment, and SCADA/controls systems. The role will be the technical authority onsite for initial start-up, functional testing, system programming, troubleshooting, and customer turnover. It requires an expert in CAT controls and power system operation who can ensure systems operate safely, reliably, and in compliance with NEC, NFPA 70/70E/110, IEEE, and Caterpillar commissioning standards.
Essential Duties
Generator Commissioning & CAT Controls
  • Perform full initial start-up on Caterpillar generator sets from 10 kW to multi-megawatt units
  • Program, configure, and troubleshoot all Caterpillar control platforms, including EMCP 2/3/4 series, Cat Digital Genset Controllers, paralleling controls (MCP, LSM), and CANbus/Modbus components
  • Validate and adjust governor/AVR parameters, load sharing, kVAR/PF controls, droop/isochronous settings, and paralleling logic
  • Run complete load bank tests (resistive/reactive), step tests, waveform analysis, and transient response testing
  • Ensure all programming aligns with Caterpillar commissioning standards and site design documents

Automatic Transfer Switch (ATS) Start-Up, Testing & Troubleshooting
  • Perform full initial start-up, functionality testing, and troubleshooting for Caterpillar, ASCO, Eaton, Zenith, ABB, and other ATS manufacturers.
  • Verify voltage/frequency sensing, time delays, transfer/retransfer logic, and contact/interlock verification
  • Test closed-transition/open-transition operation and verify proper communication with CAT generator controls
  • Document all ATS test data and ensure compliance with NFPA 110 Level 1/Level 2 requirements

Switchgear Integration (LV/MV)
  • Possess extensive knowledge of switchgear components, protective devices, interlocking schemes, and control wiring
  • Perform I/O verification, point-to-point checks, and sequence-of-operations testing
  • Troubleshoot breaker circuits, sync check circuits, PT/CT circuits, and protection elements
  • Validate paralleling with gensets and utility and confirm relay configurations
  • Coordinate with engineering on settings and coordination studies

Troubleshooting & System Optimization
  • Diagnose issues involving mechanical, electrical, controls, and network communication layers
  • Perform root-cause analysis on sync failures, load sharing imbalance, nuisance trips, communication faults, and power quality problems
  • Adjust CAT controller parameters to ensure stable and reliable performance

Safety, Documentation & Project Execution
  • Lead on-site safety (NFPA 70E, arc flash boundaries, LOTO, JHAs)
  • Maintain documentation: commissioning reports, as-builts, redlines, test results
  • Provide end-user training on CAT generator and controls operation
  • Coordinate with engineers, electricians, utilities, contractors, and inspectors

Minimum Requirements
Education
High School graduate; technical college graduate preferred.
Work Experience
  • 5-7+ years' experience with generator packages, switchgear, and Automatic Transfer Switches (3+ years as a high level GPEC EPG Master Technician performer for all internal candidates).
  • Experience in diagnosing and repairing diesel and gas engine failures.

Physical
  • Must be able to periodically lift and handle 75 lbs. in a safe manner.

Other
  • Former Caterpillar (CAT) dealership or OEM experience is highly preferred.
  • Experience with Caterpillar Electronic Technician Software is a plus.
  • Must be well versed in the electrical and mechanical aspects of power generation.
  • Must have knowledge of Generator and Utility Paralleling, PLC's, Electronic Engine Governors, Remote Monitoring Systems, Industrial Controls, and other Power Distribution equipment.
  • Proficient with various types of electronic test equipment such as Oscilloscopes, Digital Voltage Meters, Phasing Indication Meters, Harmonic Distortion Meters, and Load Banks (resistive/reactive).
  • Must be able to understand electronic diagrams and schematics
  • Possess or immediately obtain related mechanical/electrical hand tools that meet required company standards.
  • Must have a valid state driver's license with an acceptable driving record.
  • Must be able to drive a company vehicle daily and periodically take overnight business trips.
  • Must have advanced PC skills preferably with MS Excel, Word, Outlook and other Windows based programs.
  • Excellent customer service and communication skills are required.

Gregory Poole Equipment Company is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Apply