ZipRecruiter

Log In

1

Cable Contract Jobs in Oregon (NOW HIRING)

Lorven technologies

L2 Technician

Hillsboro, OR · On-site

Fully onsite. Hillsboro, OR Contract Role Top Skills: Advanced Hardware Troubleshooting & GPU ... Temporarily rack, stack, and cable servers or switches to enable remote access by network ...

Lorven Technologies

L2 Technician

Hillsboro, OR · On-site

Fully onsite. Hillsboro, OR Contract Role Top Skills: Advanced Hardware Troubleshooting & GPU ... including cable replacement or re-routing, optics replacement on server and switch ports, and ...

Wachter, Inc.

CCTV Project Technician

Portland, OR · On-site

$25 - $35/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

This role requires running low-voltage cabling, bending conduit, reading blueprints, and ... Ensure all systems satisfy customer contracts and meet local, state, and federal codes. * Team ...

Wachter, Inc.

CCTV Project Technician

Portland, OR · On-site

$25 - $35/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

This role requires running low-voltage cabling, bending conduit, reading blueprints, and ... Ensure all systems satisfy customer contracts and meet local, state, and federal codes. * Team ...

TEKsystems

L3 Data Center Technician

Hermiston, OR

$35/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Responsibilities * Install, route, terminate, label, and test copper and fiber optic cabling ... Contract position based out of Hermiston, OR. Pay and Benefits The pay range for this position is ...

TEKsystems

L2 Data Center Technician

Hermiston, OR

$30/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Responsibilities * Install, route, terminate, label, and test copper and fiber optic cabling ... Contract position based out of Hermiston, OR. Pay and Benefits The pay range for this position is ...

TEKsystems

L2 Data Center Technician

Happy Valley, OR

$30/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Responsibilities * Install, route, terminate, label, and test copper and fiber optic cabling ... Contract position based out of Portland, OR. Pay and Benefits The pay range for this position is ...

TEKsystems

L3 Data Center Technician

Hermiston, OR

$35/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Responsibilities * Install, route, terminate, label, and test copper and fiber optic cabling ... Contract position based out of Hermiston, OR. Pay and Benefits The pay range for this position is ...

Trexon

Outside Sales Representative

OR · On-site +1

We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial ...

previous pagenext page

Showing results 21-40

All JobsCable Contract JobsCable Contract Jobs in Oregon

Cable Contract information

What is a cable contract?

Cable contracts are legally binding agreements between customers and cable service providers that outline the terms and conditions for receiving cable television, internet, or bundled services. These contracts typically specify the length of service, pricing, included channels or services, equipment policies, and early termination fees. Understanding the details of a cable contract is important to avoid unexpected charges or obligations. Customers should always review the agreement thoroughly before signing to ensure it meets their needs and expectations.

What are the key skills and qualifications needed to thrive as a cable contractor, and why are they important?

To thrive as a Cable Contractor, you need expertise in installing, repairing, and maintaining cable systems, often supported by relevant technical certifications or vocational training. Familiarity with cable testing equipment, signal meters, and industry safety standards is typically required. Strong customer service, attention to detail, and problem-solving abilities are vital soft skills in this position. These competencies ensure safe, efficient installations and satisfied customers, which are crucial for success in the cable industry.

What are some common challenges faced by professionals working in cable contract management, and how can they be addressed?

Professionals in cable contract management often encounter challenges such as coordinating with multiple stakeholders, ensuring compliance with regulatory requirements, and keeping track of numerous contract details and deadlines. To address these issues, it’s important to establish clear communication channels with vendors, legal teams, and project managers. Utilizing contract management software, maintaining organized documentation, and staying updated on industry regulations can help streamline processes and minimize errors. Collaborating regularly with technical and operational teams also ensures that contract terms align with project needs.

What is the difference between Cable Contract vs Cable Installer?

AspectCable ContractCable Installer
CredentialsTypically requires a high school diploma, technical training, or certifications in cable installationUsually requires a high school diploma and on-the-job training
Work EnvironmentProject-based, often involving contract work for multiple clients or companiesFieldwork at customer locations, installing and repairing cable systems
Employer & Industry UsageContractors or companies hiring for specific projects in telecommunications or cable servicesTelecom companies, cable providers, or independent contractors

In summary, a Cable Contract typically refers to a contractual agreement for cable installation services, often involving project-based work for various clients. A Cable Installer is a professional who physically installs and repairs cable systems at customer sites. While both roles require similar skills and certifications, the contract role emphasizes project management and client relations, whereas the installer focuses on technical installation tasks.

What are the most commonly searched types of Cable jobs in Oregon?

The most popular types of Cable jobs in Oregon are:

What cities in Oregon are hiring for Cable Contract jobs?

Cities in Oregon with the most Cable Contract job openings:

Cable Contract jobs near you
Infographic showing various Cable Contract job openings in Oregon as of August 2026, with employment types broken down into 1% As Needed, 85% Full Time, 9% Part Time, 4% Contract, and 1% Nights. Highlights an 89% Physical, 3% Hybrid, and 8% Remote job distribution.

NBS IFA Technician

Motion Recruitment Partners, LLC

Hillsboro, OR • On-site

Other

Posted 5 days ago

Job description

Our client is looking for an NBS IFA Technician for a 2-month contract in Hillsboro, OR 97124
Our client is a multibillion-dollar company that provides end-to-end managed services, technology, and consulting to enable the digital workplace for small to enterprise businesses. Join their team to be part of delivering individualized experiences to a diverse range of clients in a collaborative and productive workplace environment.
Contract Duration: 2 Months
Required Skills & Experience
  • Associate or Bachelor's degree or foreign equivalent required from an accredited institution or over three years of progressive experience in the specialty in lieu of every year of education.
  • 4-5 years of combined experience in a Site Support Technician and/or Infrastructure Technician role (or similar experience)
  • Data center experience
  • 3-5 years of experience in racking, stacking, connecting, and providing basic configuration support of networking and/or server hardware.
  • Minimum 4+ years' experience in racking, stacking, connecting, and providing basic configuration support of networking or server devices.
  • Minimum 3-5 years' experience with servers and/or networking data center hardware
  • Minimum 3-5 years' experience with Windows 10/11 and Windows Server 2019/2022 OS installation and troubleshooting
  • Knowledge of computer diagnostics and installation, to include hardware/software troubleshooting and networking
  • Demonstrated experience installing server systems and related components such as networking and storage equipment.
  • Familiarity with the operation and configuration of networking protocols, network card installation, switches, routers and similar components.
  • Ability to work in a fast-paced environment and offer effective solutions under tight deadlines
  • Strong problem-solving and root cause analysis skills
  • Capable of lifting 1U and 2U rack-mounted servers up to 35 pounds and familiar with the use of pallet jacks, lifts, and general data center safety procedures
    Rack new servers and un-rack/remove old servers experience
  • Cable install & De-install / good wire management
  • May be required to walk/sit/stand/crawl/kneel for extended periods.
  • Ability to climb ladders and work from heights.
  • Effective communication skills with ability to follow written instructions for hardware and software configurations
  • Maintain a safe work environment with strict inventory control processes
  • Ability to work in hot enclosed environments for short time spans required (i.e. data center hot isles)
  • Cleanroom experience is preferred
Data center Networking competencies:
  • Proven ability to Install cable pathways, conveyances (i.e., ladder, trays, support systems)
  • Knowledge of terminology pertaining to installation & service of cabling infrastructure for telecom, data, security, and wireless systems.
  • Mechanical aptitude with the ability to read cable matrix blueprints, mechanical, and or electrical requirement documents.
  • Complete physical cables installations and removal of cable components, TOR (top of rack) switches, pathway systems (cable tray), move equipment, network gear and related communications infrastructure hardware and materials.
Experience in the following:
  • Structured Network Cabling
    • Copper: Cat5, Cat5e, Cat6, Connector Types RJ45
    • Fiber: Multimode, Single Mode, Connector Types - ST, SC, LC
  • WIFI H/W
    • Wireless LAN Controllers
    • Wireless Access Points
  • Networking
    • IP Addressing, Layer 2 VLAN etc.
  • Experienced in Ethernet Switching H/W
    • Chassis, Supervisor, Line Cards, Power Supplies etc.
    • Transceiver Types - SX, LX, SR, LR etc.
  • Cable Troubleshooting Knowledge / Experience (use of similar tools such as)
    • Fluke Testers: Copper - Wire Map, Link Test etc., Fiber - OTDR Testing
    • Fluke A
  • Data center Server/Client competencies:
    • Intermediate experience with Windows 2016/2022 installation and configuration including:
    • features need to know
    • Roles/features
    • Disk management
    • User administration
    • OS troubleshooting to identify build issues
    • Adding SAN drives/MPIO
    • Network management
  • Intermediate experience with server hardware DL360/380 Gen8, Gen9, Gen10 and BL460 Gen8, Gen9, Gen10
    • Experience troubleshooting memory, disk, array controller battery, HBA, FlexLOM issues
    • Raid configuration/ logical drives
    • iLO configuration
  • Servers and C7000 enclosures
    • Onboard Administrator
  • vSphere 6.5/7.0 vCenter experience
  • Microsoft failover cluster knowledge and installation experience
  • Microsoft NLB cluster knowledge and installation experience
What You Will Be Doing Daily Responsibilities
  • Participate in Hardware Rack & Stack installation of both Network and Server equipment, cable management, and installation of required Fiber and Copper Patch leads, providing console access to Remote Team for configuration if required and testing connectivity after installation and configuration.
  • Will be part of the onsite team maintaining the network environment in support of physical touch (Smart Hands) support of incidents and/or Requests.
  • Provide Incident & Service Request support by working with remote Level 2/3 teams to assist in resolving outages or providing new services for customers.
  • Provide Incident & Service Request support by working with remote Level 2/3 teams to assist in resolving outages or providing new services for customers and Network data center physical touch
  • Perform installation and service of low-voltage category cabling, fiber optic cabling, communications cabling, communication equipment, and other various low-voltage-related systems such as Category 5, Enhanced Category 5, Category 6 and 7, and Fiber Optic cabling.
  • Assist with material control to ensure all required materials are available to complete the daily work.
  • Ensure quality and safety guidelines are followed.
  • Ensure ticketed requests are assigned, communicated, and addressed within customer SLA.
  • Perform quality evaluation, diagnose, troubleshoot cabling systems, and perform replacement/repairs as necessary.
  • Provide support in assisting data center teams and data center managers in accomplishing daily infrastructure new landings within SLA.
    Server data center physical touch
Data Center Maintenance
  • Proactive walkthrough for failed hardware
  • Physical audit of supported systems
  • Proper disposal of hardware and media following Client guidelines
  • Management of Incident & Request Tickets Assigned to Queues
  • Validate server(s)/task is under our service responsibility
  • Contact customer for information/request downtime etc.
  • Diagnose problem - order parts as required
  • Repair/replace/configure as required within scope
  • Complete paperwork
Landings
  • Validate server(s) landing requirements
  • Contact customer as required for information
  • Physical land of hardware in correct location
  • Build to proper configuration requirements per customer provided cut sheet
  • Request tasks from required groups for additional services
  • Monitor tasks for completion or problems and escalate to appropriate parties to resolve
  • Update Asset Tracking System with server name, location, and owner
  • Complete paperwork
Decoms
  • Validate server is under our service responsibility
  • Inform customers of decom prior to removal
  • Request decom tasks from required groups to remove server(s) from their services
  • Validate that dependent services have been halted
  • Power off and remove server(s)
  • Dispose of hardware as requested by owner
  • Back Up/BAR Support
General responsibilities include:
  • Escalate unresolved issues to Tier 2 or 3 specialist or Client BaR contacts.
  • Coordinate tasks with other company contractors.
  • Physical installation of backup hardware.
  • Install operating system on backup server hardware.
  • Maintain Client-required training.
Media Management
  • Eject tapes from tape libraries in accordance with disaster recovery targets.
  • Prepare and ship tapes to offsite storage vendor.
  • Receive tapes from offsite storage vendor.
  • Load tape libraries with tapes for Scratch Pool; new, returned, expired, recalled for on-demand restores.
  • Perform post-tape load processes on tape libraries.
  • Recall tapes from offsite storage vendor.
  • Manage on-site surplus tape inventory.
  • Manage the tape lifecycle using backup and library software, and any third-party tools.
  • Dispose of damaged or EOL tapes in accordance with Client Information Security policies.
  • Monitor and respond to media errors and tape alerts from backup software and tape libraries.

Applicants must be currently authorized to work in the US on a full-time basis now and in the future.

Apply