ZipRecruiter

Log In

1

Apprentice Rigger Jobs in Florida (NOW HIRING)

UPerio USA, LLC

Tower Crane Operator

Tallahassee, FL · On-site

Several years of construction experience, preferably with hoisting, rigging or heavy-equipment operations. * Completion of a formal tower crane training program and apprenticeship is highly preferred.

next page

Showing results 1-20

All JobsApprentice Rigger JobsApprentice Rigger Jobs in Florida

Apprentice Rigger information

What are the key skills and qualifications needed to thrive as an Apprentice Rigger, and why are they important?

To thrive as an Apprentice Rigger, you need basic mechanical aptitude, physical fitness, and a high school diploma or equivalent, often supported by safety training certifications. Familiarity with rigging equipment, hand and power tools, and understanding safety systems like OSHA guidelines are commonly required. Strong teamwork, attention to detail, and effective communication help ensure safe and efficient operations on-site. These skills and qualities are crucial for preventing accidents and supporting smooth lifting and assembly tasks in construction and industrial settings.

What are the typical challenges faced by an Apprentice Rigger, and how can they be addressed?

Apprentice Riggers often face challenges such as adapting to physically demanding work, learning proper safety procedures, and understanding how to use a variety of rigging equipment. It's common to work at heights or in adverse weather conditions, so staying vigilant and proactive about safety is essential. Effective communication and teamwork are also crucial, as riggers frequently coordinate with crane operators, engineers, and other trades. Seeking guidance from experienced riggers and participating in ongoing training can help apprentices overcome these challenges and build confidence in their skills.

What is the difference between Apprentice Rigger vs Rigger?

AspectApprentice RiggerRigger
CertificationsBasic safety and rigging certifications, on-the-job trainingAdvanced rigging certifications, experience-based
Work EnvironmentSupervised, training-focused, construction or industrial sitesIndependent, complex rigging tasks, construction, entertainment, or industrial sites
Job ResponsibilitiesAssisting with rigging setup, learning safety protocolsPerforming rigging, setting up heavy equipment, ensuring safety standards

In summary, an Apprentice Rigger is in training, focusing on learning rigging basics under supervision, while a Rigger has more experience and handles complex rigging tasks independently.

What are Apprentice Riggers?

Apprentice Riggers are entry-level workers who assist experienced riggers in setting up and securing heavy loads for lifting, moving, or construction projects. They learn to use ropes, pulleys, cranes, and other equipment to safely lift and transport materials. Apprentice Riggers typically work under supervision while gaining hands-on experience and training in safety protocols, load calculations, and proper rigging techniques. Their role is essential in industries like construction, shipping, and entertainment, where precise and secure handling of heavy objects is required.
What are the most commonly searched types of Rigger jobs in Florida? The most popular types of Rigger jobs in Florida are:
What are popular job titles related to Apprentice Rigger jobs in Florida? For Apprentice Rigger jobs in Florida, the most frequently searched job titles are:
What job categories do people searching Apprentice Rigger jobs in Florida look for? The top searched job categories for Apprentice Rigger jobs in Florida are:
What cities in Florida are hiring for Apprentice Rigger jobs? Cities in Florida with the most Apprentice Rigger job openings:
Apprentice Rigger jobs near you
Outside Machinist III Part Time On Call (SRS)

Outside Machinist III Part Time On Call (SRS)

EPSILON SYSTEMS

Jacksonville, FL

Full-time

Posted 7 days ago

Job description

Epsilon Systems is seeking a part time, on call Outside Machinist III for the Ship Repair Sector located in Mayport, FL.
Summary: Repairs, modifies or overhauls various types of equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.
Responsibilities:
  • Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
  • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.
  • Insures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
  • Strictly adheres to safety, quality standards.
  • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
  • Insures all tools listed on the "Required Tools List" are available for use within two weeks of your employment.
  • Insures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.
  • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
  • Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.
  • Performs as Team Member, cooperating with the efforts of other trades during an installation, modification or repair operations.
  • Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.
  • Performs and/or verifies mechanical alignments.
  • Insures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.
  • Performs installation, repair, overhaul or modification in place or in shop to mechanical systems and components (e.g.; Valves, Actuators, Cylinders, Accumulators, Pumps, Launchers etc.).
  • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
  • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).
  • Assists in rigging when necessary.
  • Other duties as assigned.

Requirements:
  • High school diploma/equivalent/Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard
  • 5 years' experience.
  • Has knowledge of the trade qualifications and performs as a level III Outside Machinist.
  • Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.
  • Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting).
  • Must have the ability to read, understand, interpret and work from blueprints, sketches and specifications.
  • Must have experience in the disassembly, repair, installation, testing and inspection of ship machinery such as, but not limited to, propelling machinery, pumps, valves, launchers, discharge machinery, ventilation equipment, steering gear, evaporators, heaters, condensers, propulsion plants, torpedo tubes, shutter doors, antennae mast mechanical groups.
  • Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators
  • Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment.
  • Must have knowledge of rigging equipment and be able to identify damaged and/or worn equipment. Must be able to lead rigging teams in medium to larger rigging tasks.
  • Assists in rigging evolutions when necessary.
  • Communicates effectively
  • Works independently or in a group. Requires no supervision/oversight.
  • Ability to do basic math, i.e. add, subtract, divide and multiply.
  • Ability to read, write, speak, and comprehend English.
  • Ability to obtain and maintain base access to assigned government/military/private installations.
  • Ability to travel.

Preferred Qualifications
  • Ability to obtain and maintain National Security Clearance Level Secret.

ADA Notations :
  • Requires walking, reaching, sitting and concentration in the presence of occasional noise.
  • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
  • Able to lift, carry and move objects up to 50 lbs in weight.
  • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
  • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
  • Able to perceive and distinguish normal range of colors.
  • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Apply