ZipRecruiter

Log In

1

Apprentice Instrument Tubing Fitter Jobs (NOW HIRING)

Catapult Solutions Group

Instrument Fitter

Amarillo, TX

$32 - $38/hr

Familiarity with instrumentation tubing, manifolds, and process connections * OSHA 30 certification ... Completion of a formal apprenticeship program or equivalent trade school training a plus, but not ...

Anduril Industries

Pipe Fitter/Welder

Santa Ana, CA

$26 - $32/hr

Measure, cut, bevel, bend, and fit pipe and tubing, from small-bore instrument tubing to large ... Completion of apprenticeship, vocational program, or UA journeyman pipefitter certification

Danos, LLC

Instrument Fitter 1

Gray, LA · On-site

Proper installation of tubing, tube tray, fittings, bracketing systems and instrument valves per installation details. * Running single line and group line tubing with no instruction. * Fitting up of ...

Danos, LLC

Instrument Fitter 1

Gray, LA · On-site

Proper installation of tubing, tube tray, fittings, bracketing systems and instrument valves per installation details. * Running single line and group line tubing with no instruction. * Fitting up of ...

Danos, LLC

Instrument Fitter 1

Gray, LA · On-site

Proper installation of tubing, tube tray, fittings, bracketing systems and instrument valves per installation details. * Running single line and group line tubing with no instruction. * Fitting up of ...

ANDURIL INDUSTRIES

Pipe Fitter/Welder

Santa Ana, CA · On-site

$68K - $90K/yr

Measure, cut, bevel, bend, and fit pipe and tubing, from small-bore instrument tubing to large ... Completion of apprenticeship, vocational program, or UA journeyman pipefitter certification

Anduril Industries

Pipe Fitter/Welder

Santa Ana, CA · On-site

$68K - $90K/yr

Measure, cut, bevel, bend, and fit pipe and tubing, from small-bore instrument tubing to large ... Completion of apprenticeship, vocational program, or UA journeyman pipefitter certification

ISC Constructors

Instrument Fitter

Geismar, LA · On-site

We are looking for positive, energetic Instrument Fitters with a wide variety of abilities to ... Able to use mechanical and hydraulic powered tubing benders, weld fittings, and pipe specifications ...

next page

Showing results 1-20

All JobsApprentice Instrument Tubing Fitter Jobs

Apprentice Instrument Tubing Fitter information

See salary details

$14

$28

$76

How much do apprentice instrument tubing fitter jobs pay per hour?

As of Jul 16, 2026, the average hourly pay for apprentice instrument tubing fitter in the United States is $28.79, according to ZipRecruiter salary data. Most workers in this role earn between $20.67 and $29.33 per hour, depending on experience, location, and employer.

What is the salary of pipe fitter?

The salary of an apprentice instrument tubing fitter, which is similar to a pipe fitter, typically ranges from SAR 3,000 to SAR 6,000 per month depending on experience, location, and employer. Experienced pipe fitters can earn higher wages, especially with specialized skills and certifications in industrial or construction settings.

How to get into pipe fitting with no experience?

To become an apprentice instrument tubing fitter with no experience, start by gaining basic knowledge of plumbing and piping systems through online courses or technical schools. Seek entry-level positions or apprenticeships that provide on-the-job training, and obtain relevant certifications such as OSHA safety training to improve your chances of being hired.

What are the duties of a pipefitter?

A pipefitter's duties include installing, assembling, and maintaining piping systems used for water, gas, and other fluids in industrial, commercial, or residential settings. They read blueprints, measure and cut pipes, and use tools such as wrenches and welding equipment. The role often requires knowledge of safety standards and may involve working in confined or elevated spaces.

What are the key skills and qualifications needed to thrive as an Apprentice Instrument Tubing Fitter, and why are they important?

To thrive as an Apprentice Instrument Tubing Fitter, you need a basic understanding of mechanical systems, good manual dexterity, and usually a high school diploma or equivalent. Familiarity with hand and power tools, blueprint reading, and safety certifications such as OSHA or CSCS are commonly required. Attention to detail, problem-solving skills, and effective teamwork are essential soft skills in this role. These abilities are crucial for ensuring precise and safe installation of instrumentation tubing in industrial settings.

How to get into instrumentation as an electrician?

To become an apprentice instrument tubing fitter, an electrician should gain experience in electrical systems and instrumentation, often through technical training or apprenticeships. Developing skills in piping, tubing, and calibration, along with obtaining relevant certifications such as OSHA safety training, can improve job prospects in instrumentation environments.

What are Apprentice Instrument Tubing Fitters?

Apprentice Instrument Tubing Fitters are entry-level workers learning to install, maintain, and repair the small-diameter tubing used in industrial instrumentation systems. They work under the supervision of experienced fitters to develop skills in reading technical drawings, cutting and bending tubes, and ensuring leak-free connections. This role is critical in industries like oil and gas, petrochemicals, and manufacturing, where accurate instrumentation is essential for safety and process control. Apprenticeships typically combine hands-on training with classroom instruction to prepare individuals for a full career as an instrument tubing fitter.

What are some typical challenges faced by an Apprentice Instrument Tubing Fitter, and how can they be overcome?

Apprentice Instrument Tubing Fitters often encounter challenges such as working in confined spaces, interpreting complex piping diagrams, and maintaining high precision during installation. To overcome these challenges, apprentices should prioritize safety training, seek mentorship from experienced fitters, and practice reading technical schematics. Building strong communication skills is also essential, as the role frequently involves collaborating with engineers, supervisors, and other tradespeople to ensure installations meet project specifications.

What is the difference between Apprentice Instrument Tubing Fitter vs Apprentice Pipefitter?

AspectApprentice Instrument Tubing FitterApprentice Pipefitter
CertificationsBasic safety and technical training, industry-specific certificationsBasic safety, welding, and pipefitting certifications
Work EnvironmentIndustrial plants, manufacturing facilities, oil & gas sitesRefineries, chemical plants, construction sites
Job FocusInstalling and maintaining instrument tubing and control systemsAssembling, installing, and repairing piping systems
Common UsageIndustry-specific, focused on instrumentationBroader piping and plumbing applications

While both roles involve working with piping systems, Apprentice Instrument Tubing Fitters specialize in installing and maintaining instrument tubing and control systems, whereas Apprentice Pipefitters focus on general piping installation and repair. The certifications, work environments, and industry applications overlap but differ in technical focus.

What cities are hiring for Apprentice Instrument Tubing Fitter jobs? Cities with the most Apprentice Instrument Tubing Fitter job openings:
What are the most commonly searched types of Instrument Tubing Fitter jobs? The most popular types of Instrument Tubing Fitter jobs are:
What states have the most Apprentice Instrument Tubing Fitter jobs? States with the most job openings for Apprentice Instrument Tubing Fitter jobs include:
Apprentice Instrument Tubing Fitter jobs near you
Tubing / Instrument Fitter

Tubing / Instrument Fitter

VersaTech Automation Services

Harvey, LA

Full-time

Re-posted 5 days ago

Job description

Installation of pneumatic and hydraulic systems, emergency shutdown systems and equipment under minimal supervision.

  • Layout, measure, fabricate and install tubing tray.
  • Layout, measure, bend, cut, thread, ream and fit hard pipe systems.
  • Install single line and group tubing and fittings.
  • Able to layout and install pneumatic and hydraulic panels and end devices.
  • Demolition of tubing and end devices.
  • Knowledge of industry and American Petroleum Institute standards.
  • Able to read relevant construction drawings.
  • Knowledge of pneumatic and hydraulic control logic.
  • Proficient in the use of tools of the trade.
  • Able to recognize and avoid safety hazards and dangers
  • All above functions performed with minimal supervision.

Apply