See your next become the map to now, where everyone gets there cleaner, faster, and smarter. As an ... Skills & Abilities Expert Knowledge of computer assisted design and drafting (CADD) 3D and 4D ...
See your next become the map to now, where everyone gets there cleaner, faster, and smarter. As an ... Skills & Abilities Expert Knowledge of computer assisted design and drafting (CADD) 3D and 4D ...
As Survey Technician 4 , you will support licensed surveyors on a wide range of field and office tasks--including topographic and boundary surveys, legal descriptions, mapping, 3D scanning, and other ...
New
As Survey Technician 4 , you will support licensed surveyors on a wide range of field and office tasks--including topographic and boundary surveys, legal descriptions, mapping, 3D scanning, and other ...
New
Professional Land Surveyor 1
Reno, NV · On-site
As a Professional Land Surveyor , you'll work on a dynamic mix of projects-conducting topographic and boundary surveys, preparing legal descriptions, supporting mapping and 3D scanning, and ...
New
Professional Land Surveyor 1
Reno, NV · On-site
As a Professional Land Surveyor , you'll work on a dynamic mix of projects-conducting topographic and boundary surveys, preparing legal descriptions, supporting mapping and 3D scanning, and ...
New
As a Professional Land Surveyor , you'll work on a dynamic mix of projects--conducting topographic and boundary surveys, preparing legal descriptions, supporting mapping and 3D scanning, and ...
New
As a Professional Land Surveyor , you'll work on a dynamic mix of projects--conducting topographic and boundary surveys, preparing legal descriptions, supporting mapping and 3D scanning, and ...
New
3D Mapping information
See Reno, NV salary details
$19.65 - $24.08
8% of jobs
$26.98 is the 25th percentile. Wages below this are outliers.
$24.08 - $28.50
25% of jobs
$28.50 - $32.92
14% of jobs
The median wage is $34.15 / hr.
$32.92 - $37.35
9% of jobs
$37.35 - $41.77
6% of jobs
$41.77 - $46.19
8% of jobs
$47.30 is the 75th percentile. Wages above this are outliers.
$46.19 - $50.62
14% of jobs
$50.62 - $55.04
2% of jobs
$55.04 - $59.46
3% of jobs
$59.46 - $63.89
6% of jobs
$63.89 - $68.31
3% of jobs
$19
$39
$68
How much do 3d mapping jobs pay per hour?
As of Jul 14, 2026, the average hourly pay for 3d mapping in Reno, NV is $39.34, according to ZipRecruiter salary data. Most workers in this role earn between $27.07 and $48.41 per hour, depending on experience, location, and employer.
How to become a mapping specialist?
To become a mapping specialist, individuals typically need a background in geospatial sciences, geography, or related fields, along with proficiency in GIS software such as ArcGIS or QGIS. Gaining experience through internships, certifications, or training in remote sensing, 3D modeling, and cartography can enhance qualifications for this role.
What is the highest salary for mapping?
The highest salaries for 3D mapping professionals can reach over $100,000 annually, especially for experienced specialists working in advanced industries such as GIS, urban planning, or virtual reality. Senior roles with specialized skills in software like LiDAR, photogrammetry, or 3D modeling tools tend to command higher pay. Salary levels depend on experience, location, and industry demand.
What are the key skills and qualifications needed to thrive in the 3D Mapping position, and why are they important?
To thrive in 3D Mapping, you need strong spatial analysis, geospatial data interpretation, and technical drawing skills, often supported by a degree in geography, geomatics, or a related field. Proficiency with mapping software such as ArcGIS, AutoCAD, or 3D modeling tools, as well as certifications in GIS or remote sensing, is typically required. Attention to detail, problem-solving abilities, and effective communication are valuable soft skills in this role. These skills ensure accurate geospatial representations and efficient collaboration with engineering, planning, and technical teams.
What does a 3D Mapping job involve?
A 3D Mapping job involves creating three-dimensional representations of environments using specialized software and data sources like LiDAR, photogrammetry, or satellite imagery. Professionals in this field work in industries such as urban planning, autonomous vehicles, gaming, and geospatial analysis. Their tasks may include data collection, processing, visualization, and integration of 3D models into real-world applications. Strong knowledge of GIS, CAD, and 3D rendering tools is often required.
What are the typical daily tasks and team collaborations involved in a 3D Mapping role?
Professionals in 3D Mapping spend their days collecting, processing, and analyzing spatial data to create accurate three-dimensional models for a variety of industries, such as urban planning, construction, or environmental management. You’ll often work with cutting-edge technologies like LiDAR, drones, and GIS software, and collaborate closely with surveyors, engineers, and project managers to ensure project goals are met. Teamwork is essential, as 3D mappers provide critical visualizations and data that inform decision making across departments. Additionally, you may be responsible for troubleshooting data discrepancies, updating models as new information becomes available, and presenting your findings to stakeholders. This dynamic environment provides opportunities to broaden your technical expertise and take on increasing responsibilities over time.
Are cartographers still in demand?
Cartographers, including those involved in 3D mapping, continue to be in demand as geographic information systems (GIS) and digital mapping technologies expand across industries such as urban planning, environmental management, and navigation. Skills in GIS software, spatial analysis, and data visualization are valuable for these roles, which often require technical certifications and proficiency with tools like ArcGIS or QGIS.
What are popular job titles related to 3D Mapping jobs in Reno, NV? For 3D Mapping jobs in Reno, NV, the most frequently searched job titles are:
What job categories do people searching 3D Mapping jobs in Reno, NV look for? The top searched job categories for 3D Mapping jobs in Reno, NV are:
CDM Smith rating
9.1
Based on 18 frontline employees who took The Breakroom Quiz
25th of 368 rated engineering
Job description
Company Overview
Job Description
Roads less traveled? More like roads reimagined. The needs of transportation are calling. We're a team of trailblazers designing sustainable, connected journeys for a world on the move. Develop groundbreaking ideas that revolutionize how we travel. See your next become the map to now, where everyone gets there cleaner, faster, and smarter. As an integral member of this team, you will contribute to CDM Smith's success by:ResponsibilitiesWorking as a Task Leader supporting site design projects nationwide.Managing technical aspects, ensuring accuracy, and driving the technical vision of projects.Ensuring compliance with regulations and that firm policies are followedConducting site inspections, proposal creation, and client meetingsMentoring junior staff, offering technical guidance, and supervising their workDeveloping project design criteria, alignments, grading plans, utility and drainage plans, construction plans, construction specifications, and cost estimatesWriting of technical reportsSite grading and drainageUtility coordinationUtility design (water, sewer, etc.)Paving and gradingErosion control and stormwater managementGreen Infrastructure and Geotechnical considerationsCompleting Hydrologic and Hydraulic analysis of drainage systems and design of stormwater managementDelivering site design projects from initiation through final design
Qualifications
Bachelor's degree in Civil, Environmental, or Mechanical Engineering or related discipline. Certification as an Engineer in Training (EIT) or passing the Fundamentals of Engineering (FE) exam in states where an EIT is not obtainable (within 18 months of hire or promotion or transfer). 5 years of related experience. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Equivalent additional directly related experience will be considered in lieu of a degree.
Skills & Abilities
Expert Knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices. Expert Knowledge of engineer principles of design. Expert Knowledge of Microsoft business software (excel, word, etc.). Excellent verbal and written communications skills.#LI-HYBRID
Amount of Travel Required
10% or less
EEO Statement
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith Inc. and its divisions and subsidiaries are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, physical or mental disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
Background Check and Drug Testing Information
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
Massachusetts Applicants
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
Pay Range Min
USD $78,645.00
Pay Range Max
USD $129,750.00
Visa Sponsorship Available
No-We will not support sponsorship in the United States, i.e. H-1B or TN Visas for this positionQualifications:Bachelor's degree in Civil, Environmental, or Mechanical Engineering or related discipline. Certification as an Engineer in Training (EIT) or passing the Fundamentals of Engineering (FE) exam in states where an EIT is not obtainable (within 18 months of hire or promotion or transfer). 5 years of related experience. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Equivalent additional directly related experience will be considered in lieu of a degree.Education:UNAVAILABLEEmployment Type: UNAVAILABLE
Check out this video and find out why our team loves to work here!
Join Us! CDM Smith – where amazing career journeys unfold.
Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it’s a priority that the company takes good care of you and your family.
Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world.
Job Description
Roads less traveled? More like roads reimagined. The needs of transportation are calling. We're a team of trailblazers designing sustainable, connected journeys for a world on the move. Develop groundbreaking ideas that revolutionize how we travel. See your next become the map to now, where everyone gets there cleaner, faster, and smarter. As an integral member of this team, you will contribute to CDM Smith's success by:ResponsibilitiesWorking as a Task Leader supporting site design projects nationwide.Managing technical aspects, ensuring accuracy, and driving the technical vision of projects.Ensuring compliance with regulations and that firm policies are followedConducting site inspections, proposal creation, and client meetingsMentoring junior staff, offering technical guidance, and supervising their workDeveloping project design criteria, alignments, grading plans, utility and drainage plans, construction plans, construction specifications, and cost estimatesWriting of technical reportsSite grading and drainageUtility coordinationUtility design (water, sewer, etc.)Paving and gradingErosion control and stormwater managementGreen Infrastructure and Geotechnical considerationsCompleting Hydrologic and Hydraulic analysis of drainage systems and design of stormwater managementDelivering site design projects from initiation through final design
Qualifications
Bachelor's degree in Civil, Environmental, or Mechanical Engineering or related discipline. Certification as an Engineer in Training (EIT) or passing the Fundamentals of Engineering (FE) exam in states where an EIT is not obtainable (within 18 months of hire or promotion or transfer). 5 years of related experience. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Equivalent additional directly related experience will be considered in lieu of a degree.
Skills & Abilities
Expert Knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices. Expert Knowledge of engineer principles of design. Expert Knowledge of Microsoft business software (excel, word, etc.). Excellent verbal and written communications skills.#LI-HYBRID
Amount of Travel Required
10% or less
EEO Statement
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith Inc. and its divisions and subsidiaries are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, physical or mental disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
Background Check and Drug Testing Information
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
Massachusetts Applicants
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
Pay Range Min
USD $78,645.00
Pay Range Max
USD $129,750.00
Visa Sponsorship Available
No-We will not support sponsorship in the United States, i.e. H-1B or TN Visas for this positionQualifications:Bachelor's degree in Civil, Environmental, or Mechanical Engineering or related discipline. Certification as an Engineer in Training (EIT) or passing the Fundamentals of Engineering (FE) exam in states where an EIT is not obtainable (within 18 months of hire or promotion or transfer). 5 years of related experience. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Equivalent additional directly related experience will be considered in lieu of a degree.Education:UNAVAILABLEEmployment Type: UNAVAILABLE
What CDM Smith employees say
Pay
Benefits
Hours and flexibility
Workplace
Get the full story on Breakroom
About CDM Smith
Sourced by ZipRecruiter
CDM Smith is a distinguished name in the engineering and construction industry, providing insightful consulting, designing, and execution services. Based in Boston, Massachusetts, US, this full-service engineering and construction firm was founded in 1947 and has been contributing to the national and global infrastructure ever since. Serving across diverse sectors like transportation, environment, water, energy, and facilities, they have built a reputation for excellence. The company firmly stands on its mission of delivering lasting, superior solutions to the world's complex challenges, thereby ensuring their clients create a transformative impact.
Industry
Civil engineering construction
Company size
5,001 - 10,000 Employees
Headquarters location
Cambridge, MA, US
Year founded
1947