ZipRecruiter

Log In

Idler

60 Idler Full Time Jobs Hiring Near You

Precision Pulley and Idler

Plant Utility

Humboldt, IA · On-site

Precision Pulley & Idler (PPI) Location: Humboldt, IA - On-site Shift: 1st F LSA: Non - Exempt Grade: 2 Job Status: Full Time Travel Required: 0% Revision Date: December 2024 Reports To: Supervisor ...

Precision Pulley and Idler

Shaft Install Tech

Pella, IA · On-site

Precision Pulley & Idler (PPI) Location: Pella, IA - On-site Shift: 1st F LSA: Non-Exempt Grade: 1 Job Status: Full-Time Travel Required: 0-5% Revision Date: February 7, 2022 Reports To: Production ...

Precision Pulley and Idler

Utility

Corning, IA · On-site

Precision Pulley & Idler (PPI) Location: Corning, IA - On-site Shift: 1st F LSA: Non - Exempt Grade: 1 Job Status: Full-Time Travel Required: 0% Revision Date: February 8, 2024 Reports To: Production ...

Precision Pulley and Idler

Shipping Utility

Lenox, IA · On-site

$13.50 - $16.25/hr

Precision Pulley and Idler (PPI) Location: Lenox, Iowa - On-site Shift: 1st F LSA: Non-Exempt Hourly Grade: 1 Job Status: Full-Time Travel Required: 0% Revision Date: April 11, 2024 Reports To:

Precision Pulley and Idler

Painter / Shipper

Pella, IA · On-site

$16.75 - $20.25/hr

Precision Pulley & Idler (PPI) Location: Pella, IA - On-site Shift : 1st F LSA: Non - Exempt Grade: 1 Job Status: Full-Time Travel Required: 0% Revision Date: November 2024 Reports To: Supervisor ...

New

Croell, Inc.

Mechanic

La Crosse, WI · On-site

This is a full-time position that requires overtime through peak season, reports to the Territory ... Repair tires, wheels, wheel bearings, idler wheels, idler bearings, and oil seals. * Replaces ...

Croell, Inc.

Heavy Equipment & Diesel Mechanic

New Hampton, IA · On-site

$22 - $30.50/hr

This is a full-time position that requires overtime, hours M-F 7:00am-5:00pm. This position reports ... Repair tires, wheels, wheel bearings, idler wheels, idler bearings, and oil seals. * Replaces ...

Precision Pulley and Idler

Press Operator (Rubber)

Lenox, IA · On-site

$14 - $18.25/hr

Precision Pulley and Idler Location: Lenox, IA - On-site Shift: 1st Salary Grade: 1 F LSA: Non-Exempt Physical Grade: 2 Job Status: Full-Time Travel Required: 0% Revision Date: September 20, 2024 ...

Precision Pulley and Idler

Press Operator

Lenox, IA · On-site

$14 - $18.25/hr

Precision Pulley and Idler Location: Lenox, IA - On-site Shift: 1st Salary Grade: 1 F LSA: Non-Exempt Physical Grade: 2 Job Status: Full-Time Travel Required: 0% Revision Date: September 20, 2024 ...

New

Precision Pulley and Idler

Machine Operator

Lenox, IA · On-site

$14.25 - $17/hr

Precision Pulley and Idler (PPI) Location: Lenox, IA - On-site Shift: 1st S alary Grade: 1 F LSA: Non-Exempt Physical Grade: 2 Job Status: Full-Time Travel Required: N/A Revision Date: October 9, ...

New

Precision Pulley and Idler

Painter

Lenox, IA · On-site

$15.50 - $21/hr

Precision Pulley & Idler (PPI) Location: Lenox, IA - On-site Shift: 1st F LSA: Non - Exempt Grade: 1 Job Status: Full Time Travel Required: 0% Revision Date: May 19, 2025 Reports To: Production ...

Precision Pulley and Idler

CNC Specialist

Corning, IA · On-site

Precision Pulley and Idler Location: Corning, Iowa - On-site Shift: 1st Salary Grade: 2 F LSA: Non-Exempt Physical Grade: 2 Job Status: Full-Time Travel Required: N/A Reports To: Production ...

Precision Pulley and Idler

Shafter

Corning, IA · On-site

Precision Pulley and Idler (PPI) Location: Corning, IA - On-site Shift: 1st Salary Grade: 1 F LSA: Non - Exempt Physical Grade: 2 Job Status: Full Time Travel Required: 0% Revision Date: September 13 ...

New

next page

Showing results 1-20

All JobsIdler JobsIdler Full Time Jobs

Idler Jobs Information

Infographic showing various Full Time job openings at Idler in the United States as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% Physical job distribution.

Plant Utility

Precision Pulley and Idler

Humboldt, IA • On-site

Full-time

Re-posted 24 days ago

Job description

Job Title: Plant Utility

Division: Precision Pulley & Idler (PPI)

Location: Humboldt, IA - On-site

Shift: 1st

FLSA: Non-Exempt

Grade: 2

Job Status: Full Time

Travel Required: 0%

Revision Date: December 2024

Reports To: Supervisor


PURPOSE OF POSITION

The Plant Utility is responsible for performing a variety of tasks and duties across the plant to support production and operational needs. This role ensures the efficient production of parts and components that meet company and customer specifications while providing flexible assistance wherever needed to maintain workflow and meet business objectives.

ESSENTIAL DUTIES AND RESPONSIBILITIES

The following duties are normal for this position. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned.

The employee owner’s tasks and responsibilities may include:

  • Flexibly supporting operations across the plant by performing assignments and tasks in various areas as directed by lead or supervisor to meet evolving business needs.
  • Collaborating with team members, leads, and supervisors to ensure production goals are achieved.
  • Operating various machines, including lathes and mills, to produce precision components according to specifications.
  • Setting up machines by installing fixtures, tooling, workpieces, and setting machine parameters (e.g., speeds, feeds, and offsets).
  • Troubleshooting machine issues, altering programs or machine settings to ensure efficient and accurate operations.
  • Inspecting and measuring finished products using precision instruments such as calipers, micrometers, and gauges to ensure they meet specifications.
  • Making necessary adjustments to machinery to improve product quality or production efficiency.
  • Performing routine maintenance on machines, including cleaning, lubrication, and part replacement, to ensure the longevity of the equipment.
  • Identifying and resolve mechanical or technical issues with machines to minimize downtime.
  • Communicating machine performance, production issues, or potential improvements to management.
  • Machining components to the proper dimensions and tolerances.
  • Using and understanding various paperwork including schedules, prints, and tech standards.
  • Comprehending and following directions from supervisor.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Proven ability to shift between tasks and work areas as operational needs arise.
  • Demonstrated problem-solving skills and a proactive approach to supporting team goals.
  • Strong communication skills to effectively interact with team members, leads, and supervisors.
  • Be able to demonstrate proficiency in reviewing and understanding electronic or written blueprints and/or specifications.
  • Must be able to work independently to complete work in a timely manner.
  • Demonstrates the ability to work effectively within a team environment.
  • Strong critical thinking, and problem-solving abilities are required
  • Must to be able to read and interpret blueprints.
  • Effectively communicate and understand job instructions both verbally and written.
  • Ability to perform basic mathematical computations.
  • Possess knowledge of machine tools.
  • Ability to take accurate measurements, which may include but are not limited to using tools such as tape measures, calipers, and micrometers.
  • Demonstrate regular, consistent attendance.

EDUCATION – EXPERIENCE – COMPUTER SKILLS

  • High school diploma or a general education degree (GED); or
  • One to three months related experience and/or training; or
  • Equivalent combination of education and experience.


TRAINING – CERTIFICATIONS – LICENSES

  • Forklift License
  • Continually participating in additional training related to the job.

COMPETENCIES

To perform this position successfully, individual should demonstrate the following work competencies:

  • Safety and Security - Observes safety and security procedures; Uses equipment properly.
  • Problem Solving - Identifies and resolves issues in a timely manner.
  • Communication Skills – Speaks clearly, listens and receives clarification, respond to questions.
  • Dependability - Follows instructions, responds to management direction, and takes responsibility.
  • Quality Assurance - Demonstrates accuracy and thoroughness.
  • Ethics/Professionalism - Treats people with respect; Works ethically and with integrity.
  • Organizational Support - Follows policies and procedures.
  • Judgment - Exhibits sound and accurate judgment.


PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this position, the employee:

  • Must be able to regularly sit, kneel, crouch, crawl, and/or stoop/bend.
  • Must be able to regularly use hands and arms.
  • Must be able to regularly stand and walk.
  • Must be able to occasionally lift and/or move up to 50 pounds.
  • Must be able to frequently lift and/or move up to 25 pounds.
  • Specific vision abilities required by this job include close (clear at 20 inches or less), distance (clear at 20 feet or more), color (ability to identify and distinguish colors), peripheral vision, depth perception and the ability to adjust focus.
  • Specific hearing abilities required for this job include the ability to hear equipment alarms and the ability to hear instructions from others.

ENVIRONMENTAL ADAPTABILITY

  • The noise level in the work environment is usually LOUD.
  • Frequently exposed to wet or humid conditions(non-weather), work near moving mechanical parts, fumes, or airborne particles, toxic or caustic chemicals, and vibration.
  • Occasionally exposed to outdoor weather conditions, and risk of electrical shock.
  • Steel-toe safety shoes, safety glasses, and hearing protection.


Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.


Precision, Inc. is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, The Employer will provide reasonable accommodations to qualified individuals with disabilities and encourages prospective employees and incumbents to discuss potential accommodations with Precision, Inc.