ZipRecruiter

Log In

Htsg

14 jobs near Columbus, OH

HTSG

Safety Specialist -1 - O - STY10

Sparks, NV · On-site

$35 - $40/hr

Location: Sparks, Nevada Compensation: $35.00-$40.00 | Per Diem: $4,515 | W2 Full Time | Benefits: Health, Vision, Dental and other voluntary benefits Position Overview The Safety Specialist serves ...

HTSG

Field Engineer (E&I)

Burlington, TX · On-site

$10K - $13K/mo

Position Overview The QA/QC Field Engineer - Electrical & Controls role is an owner-level field position within Halo Technical Solutions Global's quality and commissioning support team. This role is ...

HTSG

Field Engineer (E&I)

Burlington, TX · On-site

Position Overview The QA/QC Field Engineer - Electrical & Controls role is an owner-level field position within Halo Technical Solutions Global's quality and commissioning support team. This role is ...

HTSG

Field Engineer (E&I)

Burlington, TX · On-site

Position Overview The QA/QC Field Engineer - Electrical & Controls role is an owner-level field position within Halo Technical Solutions Global's quality and commissioning support team. This role is ...

HTSG

QC Manager - Mechanical

Chesterfield, VA · On-site

$60 - $67/hr

Position Title: QA/QC Manager - Mechanical Location: Richmond, VA Compensation: $60-$67 per hour | Per Diem: $4,515 | Hourly W2 Full Time | OT after 40 hours | Benefits: Health, Vision, Dental ...

HTSG

Project Engineer - 1 - O - SPC13

Clarksville, TN · On-site

$45 - $50/hr

Project Engineer - 1 Position Title: Project Engineer - 1 Location: Clarksville, TN Compensation: | $45-$50 an hour, Per Diem: $4,515 | Hourly W2 Full Time | OT after 40 hours | Benefits: Health ...

HTSG

Controls Project Manager

Burlington, TX · On-site

Position Overview We are seeking a Controls Project Manager with strong controls, project management, and design engineering experience to support a data center project in Burlington, TX. This role ...

HTSG

Project Engineer

Sparks, NV · On-site

$48.24/hr

Location: Sparks, NV Compensation: $48.24 per hour | Per Diem: $4,515 | Hourly W2 Full Time | OT after 40 hours | Benefits: Health, Vision, Dental Position Overview The Project Engineer role is a ...

HTSG

Inspector 1 - O - SPC13

Clarksville, TN · On-site

$45 - $50/hr

Position Title: Inspector - 1 Location: Clarksville, TN Compensation: $45-$50 an hour | Per Diem: $4,515 | Hourly W2 Full Time | OT after 40 hours | Benefits: Health, Vision, Dental | Position ...

HTSG

Electrical QC Inspector Level 2

Sparks, NV · On-site

Key Responsibilities Advanced Inspection Activities: Perform complex electrical and multi-trade inspections independently Conduct pre-installation, in-progress, and final inspections across all ...

HTSG

Field Engineer (Mechanical)

Burlington, TX · On-site

$10K - $13K/mo

Position Overview The Mechanical Field Engineer serves as the Owner's Representative in the field, supporting quality, commissioning, and construction execution activities on large-scale industrial ...

HTSG

Construction Safety Manager

Sparks, NV · On-site

$35/hr

Construction Safety Manager (EHS) Location: Sparks, NV - On Site Employment Type: Full-Time | W2 Pay: $35 per hour (OT after 40 hours) Per Diem: $4,515 per month Benefits: Health, Dental, Vision, and ...

HTSG

Inspector - 2 - O - SPC13

Clarksville, TN · On-site

$50 - $55/hr

Position Title: Inspector - 2 Location: Clarksville, TN Compensation: $50-$55 an hour | Per Diem: $4,515 | Hourly W2 Full Time | OT after 40 hours | Benefits: Health, Vision, Dental | Position ...

HTSG

Electrical QAQC Manager - TN

Clarksville, TN · On-site

$65.03/hr

QA/QC Manager - Electrical Position Title: QA/QC Manager - Electrical Location: Clarksville, TN Compensation: $65.03 per hour | Per Diem: $4,515 | Hourly W2 Full Time | OT after 40 hours | Benefits:

Safety Specialist -1 - O - STY10

HTSG

Sparks, NV • On-site

$35 - $40/hr

Full-time

Medical, Dental, Vision

Posted 12 days ago

Job description

Location: Sparks, Nevada
Compensation: $35.00-$40.00 | Per Diem: $4,515 | W2 Full Time | Benefits: Health, Vision, Dental and other voluntary benefits
Position Overview
The Safety Specialist serves as an on-the-ground guardian of the company's safety culture by maintaining a safe, compliant, and well-organized job site. This role not only enforces safety regulations but also encourages teams to take ownership of safe work practices. Through daily inspections, training, incident prevention, and collaboration with project leadership, the Safety Specialist helps protect employees, prevent accidents, and ensure projects meet the highest safety standards while remaining on schedule and incident-free.
Key Responsibilities
  • Conduct daily site safety inspections, audits, and field observations
  • Identify, document, communicate, and help correct potential safety hazards
  • Ensure compliance with OSHA, NFPA 70E, project requirements, and company safety policies
  • Lead safety briefings, toolbox talks, and training sessions
  • Provide training and guidance on Lockout/Tagout, trench safety, electrical hazards, and other site-specific risks
  • Assist the Safety Department Manager with incident and near-miss investigations
  • Prepare investigation reports and recommend corrective actions for safety non-compliance
  • Work with foremen, managers, supervisors, and project managers to resolve safety concerns
  • Integrate safety requirements into each phase of project operations
  • Maintain accurate safety documentation, permits, inspection logs, and compliance records
  • Verify the proper use and condition of personal protective equipment
  • Respond to on-site medical emergencies and provide First Aid, CPR, or AED support
  • Reinforce safe work practices and promote a proactive safety culture across the job site

Required Experience & Qualifications
  • 1-3+ years of construction safety experience
  • Strong knowledge of federal, state, and local safety regulations
  • OSHA 30-Hour Construction Safety and Health Certification
  • First Aid, CPR, and AED Certification through the American Heart Association
  • NFPA 70E Electrical Safety in the Workplace Certification
  • Lockout/Tagout (LOTO) training
  • Trench Awareness training
  • Strong communication, training, and field decision-making skills
  • Ability to work effectively with employees, supervisors, and project leadership
  • Ability to identify hazards and enforce safety standards in real time
  • Proactive, solutions-focused approach to preventing workplace incidents
  • Commitment to safety, accountability, and quality

Preferred Qualifications (Optional)
  • Associate degree, trade school education, technical certification, or related field experience
  • Experience working on data center, mission-critical, industrial, or large-scale construction projects
  • Experience analyzing safety data and trends to support continuous improvement
  • Experience conducting incident investigations and developing corrective action plan

About Halo Technical Solutions Global
Halo Technical Solutions Global is a technical consulting and project support firm focused on quality assurance, quality control, and commissioning for complex industrial and infrastructure projects. The company partners closely with project teams to deliver clear processes, practical solutions, and improved visibility across all phases of execution.
Halo provides turnkey QA/QC and commissioning management, BIM-driven 3D/4D execution, logistics coordination, LiDAR scanning and drone deployment, vendor and project management, and general staff augmentation. Their approach emphasizes asset-level clarity, from early design and asset tagging through scheduling, completions management, and system-level execution.
By integrating assets into digital platforms such as Autodesk Construction Cloud and leveraging analytics through tools like Power BI, Halo enables teams to execute, monitor, and optimize performance with transparency and control. The company's implementation strategy is built around understanding stakeholder pain points, identifying gaps, developing site-specific solutions, and delivering comprehensive training to support long-term success.
Halo Technical Solutions Global's mission is to support project teams with structured, data-driven execution that aligns with owner requirements and drives confident, efficient project delivery.
The pay range for this role is:
35 - 40 USD per hour (US National)

Apply