ZipRecruiter

Log In

1

Window And Door Installer Jobs in Riverside, CA (NOW HIRING)

International Window

Window & Door Fabricator

Corona, CA · On-site

$17/hr

They are competent in IGU fitting, weathersealing, and hardware installation, with a sound understanding of Cal/OSHA shop floor safety requirements. Summary/Objective: A Window & Door Fabricator is ...

ATI Restoration

National Project Manager

Anaheim, CA · On-site +1

This includes, but is not limited to the following activities: reading plans or instructions, finish carpentry, framing, hanging crown moldings, installing board ups, installing window/door casings ...

ATI Restoration

National Project Manager

Anaheim, CA · On-site +1

This includes, but is not limited to the following activities: reading plans or instructions, finish carpentry, framing, hanging crown moldings, installing board ups, installing window/door casings ...

Glidewell Dental

Construction Laborer II

Irvine, CA

$24.74 - $27/hr

Installs framed doors and windows. Identifies and fixes door/window issues. * Painting: Paint with attention to detail with little to no rework. * T-bar: Install T-bar ceilings, and has knowledge of ...

KPS PowerHome

Be Seen First

Alarm / Smart Home Outside Sales - Residential

Corona, CA · On-site

$50K - $100K/yr

... installation requirements. Responsibilities include confirming locations for: * Keypads * Motion detectors * Door and window sensors * Glass break detectors * Smoke detectors * Smart home devices

next page

Showing results 1-20

All JobsWindow And Door Installer JobsWindow And Door Installer Jobs in Riverside, CA

Window And Door Installer information

See Riverside, CA salary details

$13

$33

$104

How much do window and door installer jobs pay per hour?

As of Aug 11, 2026, the average hourly pay for window and door installer in Riverside, CA is $33.78, according to ZipRecruiter salary data. Most workers in this role earn between $20.05 and $33.12 per hour, depending on experience, location, and employer.

How much do window and door installers make?

Window and door installers in general earn a median annual wage of around $45,000 to $55,000, depending on experience, location, and employer. In some regions, wages can range from $30,000 for entry-level positions to over $70,000 for experienced installers or those with specialized skills. Factors such as certifications, tools proficiency, and working conditions influence earnings.

What is the difference between Window And Door Installer vs Glass Installer?

AspectWindow And Door InstallerGlass Installer
CredentialsHigh school diploma, on-the-job training, possibly certifications in installationHigh school diploma, specialized training or apprenticeship in glass handling
Work EnvironmentConstruction sites, residential and commercial buildingsManufacturing facilities, construction sites, or repair settings
Industry UsageCommonly employed by contractors, remodeling companies, or window/door suppliersEmployed by glass companies, glaziers, or construction firms

Both roles involve working with glass and building components, but Window And Door Installers focus on installing entire window and door units, while Glass Installers specialize in handling and installing glass panels or panes. The roles often overlap but differ mainly in scope and specific skills required.

What does a window and door installer do?

A Window and Door Installer is responsible for fitting, repairing, and replacing windows and doors in residential or commercial properties. They measure openings, remove old units, prepare the area, and install new windows and doors, ensuring they are properly sealed and function correctly. Installers work with a variety of materials, such as wood, aluminum, vinyl, and fiberglass. They also ensure installations meet building codes and safety standards, and may provide advice on maintenance or energy efficiency. Good customer service and attention to detail are important in this role.

What are some common challenges faced by window and door installers on the job, and how can they be managed?

Window and door installers often encounter challenges such as dealing with unexpected structural issues, weather conditions, or working in tight or awkward spaces. To manage these challenges, it’s important to thoroughly assess each job site before starting, use proper safety equipment, and communicate closely with homeowners or contractors about any unforeseen complications. Many teams work in pairs or small groups for efficiency and safety, which also helps with troubleshooting on-site issues quickly. Continuous training on new installation techniques and building codes can further help installers adapt to evolving industry standards.

What qualifications do I need to be a window and door installer?

To become a window and door installer, you typically need a high school diploma or equivalent, along with experience in construction or carpentry. Some employers prefer candidates with knowledge of tools, safety procedures, and the ability to read blueprints; certifications in OSHA safety standards can also be beneficial.

What are the key skills and qualifications needed to thrive as a window and door installer?

To thrive as a Window and Door Installer, you need strong carpentry skills, attention to detail, and experience with measuring and fitting, often supported by a high school diploma or equivalent and on-the-job training. Familiarity with power tools, hand tools, and occasionally certifications in construction safety practices (like OSHA) are typically required. Excellent problem-solving abilities, customer service skills, and reliability help installers stand out in this role. These competencies ensure precise installations, safety on job sites, and high levels of customer satisfaction.

What does a window and door installer do?

As a window and door installer, you travel to homes and businesses to remove old windows, doors, and frames, and replace them with new ones. Your duties include working with power tools, sealing fittings, taking accurate measurements, fixing units, transporting supplies, and cleaning up the job site. Installation of doors and windows, climbing ladders to complete jobs, and communicating with the customer are also your responsibility. You work with wooden doors, aluminum doors, and windows of all grades. Window and door installers work on new buildings and repair issues from previous installations that were done incorrectly or are damaged.

Is being a window and door installer hard?

Being a window and door installer involves physical labor, working at heights, and using tools like drills and saws. The job requires attention to detail, safety awareness, and sometimes working in varying weather conditions, but it can be learned through training and experience.
More about Window And Door Installer jobs
What cities near Riverside, CA are hiring for Window And Door Installer jobs? Cities near Riverside, CA with the most Window And Door Installer job openings:
Window And Door Installer jobs near you
Infographic showing various Window And Door Installer job openings in Riverside, CA as of August 2026, with employment types broken down into 36% Full Time, 61% Part Time, and 3% Contract. Highlights an 97% Physical, and 3% Remote job distribution, with an average salary of $70,272 per year, or $33.8 per hour.

Window & Door Fabricator

International Window

Corona, CA • On-site

$17/hr

Full-time

Medical, Dental, Vision, PTO

Re-posted 29 days ago

Job description

A Window & Door Fabricator cuts, assembles, and finishes aluminum frame components into completed window and door units using shop floor machinery, working accurately from technical drawings and job orders. They are competent in IGU fitting, weathersealing, and hardware installation, with a sound understanding of Cal/OSHA shop floor safety requirements.

Job Description

Summary/Objective: A Window & Door Fabricator is committed to producing quality window and door units by cutting, assembling, and finishing aluminum fenestration products to exact specifications. The Fabricator seeks to contribute precision craftsmanship and a team-focused work ethic on the shop floor.

Essential Functions:

  • Fasten frame components to produce window and door frames
  • Fit and install glazing units, gaskets, seals, and weather strips into fabricated frames
  • Install hardware including handles, hinges, locking mechanisms
  • Assemble and square frames, ensuring correct tolerances and alignment throughout
  • Operate routing, drilling, and crimping machinery in accordance with production schedules
  • Inspect finished units against job sheets, technical drawings, and customer specifications
  • Carry out visual and dimensional checks at each stage of fabrication
  • Identify and report defects, non-conformances, or material issues to the supervisor
  • Maintain accurate production records and labelling of completed units
  • Work as part of a production team to meet daily output targets and delivery schedules
  • Communicate effectively with team leaders, supervisors, and colleagues

Skills, Experience & Qualifications

  • Ability to read and work from technical drawings and work orders
  • Practical experience operating workshop machinery (saws, routers, welders, crimpers)
  • Strong attention to detail with a commitment to producing high-quality work
  • Good understanding of health and safety practices on a manufacturing shop floor
  • Ability to work efficiently both independently and as part of a team
  • Physical fitness to stand for extended periods, lift components, and work in a manufacturing environment

Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this role. Duties, responsibilities and activities may change at any time with or without notice.

Work Environment: This is a hands-on, shop floor role in an active manufacturing environment. The successful candidate will be expected to work within a busy production facility, with exposure to noise, dust, and machinery typical of a glazing fabrication setting. Appropriate PPE will be provided. This job operates out of the plant in Corona, CA.

Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This role is mainly executed on the plant floor. The employee will be exposed to heavy machinery, moving equipment, and varying temperature conditions. The noise level in the work environment may eventually be loud. PPE must be worn in designated areas. No travel is expected for this position.

Job Type: Full-time

Benefits:

  • 401(k)
  • Dental insurance
  • Health insurance
  • Paid time off and holidays
  • Vision insurance
  • Overtime opportunities

Schedule:

  • 8 hour a day, Monday thru Friday

Company Description

International Window is a long-time Manufacturer in the window & door industry. We offer a wide array of products both in aluminum and vinyl. We have authorized dealers that have remained loyal customers for 30 + years and we continue to grow.