ZipRecruiter

Log In

1

Welder Direct Jobs in Rochester, NY (NOW HIRING)

Fermilab

Thermal-Fluids Mechanical Engineer

Batavia, NY

$88K - $116K/yr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Occasionally direct the activities of co-op engineering students and interns on their projects ... Knowledge of welding and brazing practices (e.g., TIG, MIG and torch brazing) as related to ...

Service Experts

Plumber III

Rochester, NY · On-site

$100K/yr

Weld, solder, or join pipes using approved methods. * Clean up job sites and ensure proper disposal ... Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately * Reports ...

HP Hood

Maintenance Mechanic - Nights - 12-Hour Shifts

Batavia, NY · On-site

$35.42 - $37.12/hr

  • Medical

  • Dental

  • Vision

  • Retirement

Ability to use hand tools including, lathes, drill presses, saws, welding equipment, calibration ... Performs any and all duties as directed by Supervision. Education and Experience: * GED or High ...

City of Rochester, NY

Master Automotive Technician

Rochester, NY · On-site

$57K - $79K/yr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

... direct), and parts and materials used; * Performs emergency road repairs, off-site repairs, and ... Performs minor cutting & welding; * Leads, directs, and trains other Mechanics or Auto Aides.

CoolSys

Commercial Journeyman Refrigeration

Rochester, NY · On-site

$24 - $40/hr

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Provides the required installation of pipe hangers as directed by the foreman. * Provides construction support by welding and slip hosing copper pipes, and assists the foreman as needed on the job.

Tractor Supply Company

TM Receiver

Geneseo, NY · On-site

$15.50 - $19.50/hr

  • Medical

  • Dental

  • Vision

  • Life

Receive Direct POs, Mixing Center freight, Bulk Center freight, and DC receiving transfers ... Retail experience and/or farming, ranching, pet/equine, or welding knowledge is strongly preferred.

Service Experts

Plumber III

Rochester, NY · On-site

$100K/yr

Weld, solder, or join pipes using approved methods. * Clean up job sites and ensure proper disposal ... Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately * Reports ...

Tractor Supply Company

TM Receiver

Geneseo, NY

$15.50 - $19.50/hr

  • Medical

  • Dental

  • Vision

  • Life

Receive Direct POs, Mixing Center freight, Bulk Center freight, and DC receiving transfers ... Retail experience and/or farming, ranching, pet/equine, or welding knowledge is strongly preferred.

City of Rochester, NY

Master Truck Technician

Rochester, NY · On-site

$62K - $86K/yr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

... direct), and parts and materials used; * Performs emergency road repairs, off-site repairs, and ... Performs minor cutting & welding; * Repairs hydraulic systems; * Leads, directs, and trains other ...

Precise Tool & Manufacturing Inc.

PROCESS ENGINEER

Rochester, NY · On-site

$29 - $43/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

JOB SUMMARY Under the direct supervision of the Engineering Manager, the Process Engineer is ... treat, welding, plating and painting. * Attention to detail. * Customer focus. * Analytical and ...

CRH

Plant Operator

Rochester, NY · On-site

$30.20 - $32.20/hr

  • Medical

  • Dental

  • Retirement

  • PTO

... directed * Perform general labor, housekeeping, and other duties as needed to support plant ... Ability to safely perform welding and cutting using oxygen-acetylene equipment * Ability to operate ...

CRH

Plant Operator

Rochester, NY

$30.20 - $32.20/hr

  • Medical

  • Dental

  • Retirement

  • PTO

... directed * Perform general labor, housekeeping, and other duties as needed to support plant ... Ability to safely perform welding and cutting using oxygen-acetylene equipment * Ability to operate ...

previous page

Showing results 41-60

All JobsWelder Direct JobsWelder Direct Jobs in Rochester, NY

Welder Direct information

See Rochester, NY salary details

$13

$21

$30

How much do welder direct jobs pay per hour?

As of Aug 16, 2026, the average hourly pay for welder direct in Rochester, NY is $21.96, according to ZipRecruiter salary data. Most workers in this role earn between $18.51 and $24.42 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a Welder Direct?

To thrive as a Welder Direct, you need proficiency in welding techniques, blueprint reading, and a high school diploma or equivalent, often complemented by welding certifications such as AWS. Familiarity with welding equipment, safety protocols, and fabrication tools is typically required. Attention to detail, problem-solving, and strong hand-eye coordination are vital soft skills that help ensure precision and quality. These skills are essential for producing safe, reliable welds and meeting industry standards in various fabrication and construction projects.

What is a Welder Direct?

Welder Direct jobs refer to positions where welders are hired directly by a company, rather than through a staffing agency or third-party contractor. These jobs typically involve fabricating, joining, and repairing metal parts using welding equipment in industries such as construction, manufacturing, or automotive. Direct hire positions often offer better job security, company benefits, and opportunities for career advancement compared to temporary or contracted roles. Welders in these roles are expected to have relevant certifications, experience, and a strong understanding of safety protocols.

What are some common safety challenges welders face on the job and how are they addressed in a typical work environment?

Welders often encounter safety challenges such as exposure to intense heat, fumes, and ultraviolet light, as well as the risk of burns or electric shock. Most employers address these risks by providing comprehensive safety training, enforcing the use of personal protective equipment (PPE) like helmets, gloves, and respirators, and maintaining strict safety protocols in the work area. Regular equipment inspections and adherence to OSHA guidelines are also standard practices to minimize hazards and ensure a safe working environment for all team members.

What is the difference between Welder Direct vs Welder Apprentice?

AspectWelder DirectWelder Apprentice
CertificationsTypically requires AWS or ASME certificationsMay be in training, with limited certifications
Work EnvironmentActive in manufacturing, construction, or repair sitesUnder supervision, learning on the job
Job ResponsibilitiesPerforms welding tasks independentlyAssists experienced welders, learning techniques

Welder Directs are fully qualified professionals performing welding tasks independently, while Welder Apprentices are in training, gaining skills under supervision. The main differences lie in certification levels, independence, and experience. Both roles are essential in the industry, but Welder Directs have more responsibility and autonomy.

What are popular job titles related to Welder Direct jobs in Rochester, NY?

For Welder Direct jobs in Rochester, NY, the most frequently searched job titles are:

What job categories do people searching Welder Direct jobs in Rochester, NY look for?

The top searched job categories for Welder Direct jobs in Rochester, NY are:

What cities near Rochester, NY are hiring for Welder Direct jobs?

Cities near Rochester, NY with the most Welder Direct job openings:

Welder Direct jobs near you

Thermal-Fluids Mechanical Engineer

Fermilab

Batavia, NY

$88K - $116K/yr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 29 days ago

Fermilab rating

9.1

Company rating: 9.1 out of 10

Based on 9 frontline employees who took The Breakroom Quiz

11th of 120 rated laboratories

Job description

The expected hiring range for this position is:

$88,800.00-$116,900.00.

Please note that the pay range information is a general guideline only. The pay offered to a selected candidate will be determined based on factors such the scope and responsibilities of the position, qualifications of the selected candidate, business considerations, internal equity, and external market pay for comparable jobs.

This position is not eligible for referral bonus program and sponsorship assistance.
This position is eligible for relocation assistance.
About the Role:
The Mechanical Support Department of the Accelerator Division within Fermilab is seeking a Mechanical Thermal Fluids Engineer. Under general directions, this individual will be responsible for planning, researching, and developing large/ major engineering projects. They will lead and contribute to areas such as design, procurement, manufacture, installation, testing, and initial operation of thermal systems in compliance with all applicable local, state, and federal regulations, requirements, and standards, and all Department of Energy (DOE) orders. Responsibilities will also include the estimation of manpower, work scheduling, coordinating and directing or managing technicians and other engineers as assigned. Will review progress and evaluate results.What your day-to-day as a Thermal Fluids Mechanical Engineer at Fermilab will look like:
  • Utilize fundamental mechanical engineering concepts and principles to complete assignments and develop familiarization with the Laboratory's method of project engineering, from the design stage through review, procurement, fabrication, installation, test, and operation.
  • Perform mechanical design, analysis, specification, and construction of fluid cooling piping systems that support the operation of the accelerator complex, including the temperature control of beamline components such as magnets, collimators, RF cavities, beam instrumentation, high-powered targets, kickers, and associated beam components.
  • Participate in and lead efforts related to thermal-fluid system design, piping system fluid flow analysis, and heat transfer analysis.
  • Learn the operations of existing accelerator fluids systems and provide operations engineering support by troubleshooting system issues and designing upgrades to existing systems to improve their reliability.
  • Participate in the design of compressible and incompressible thermal fluids systems to support the accelerator.
  • Write fabrication specifications that involve welding, brazing, bonding, and soldering techniques with materials such as aluminum, stainless steels, copper, brass, PVC, CPVC, PVDF etc.
  • Work in a team environment and under the supervision of a senior engineer.
  • Be responsible for directing the activities of drafters, designers, technicians, and skilled trades on their projects.
  • Occasionally direct the activities of co-op engineering students and interns on their projects.
  • Communicate with outside vendors, contractors, and fabricators verbally and through written specifications and engineering drawings.
  • Abide by and be responsible for performing all duties in accordance with all environmental, health and safety regulations and practices pertinent to this position.
Skills and Attributes for Success:
  • Bachelor's in an applicable Engineering discipline from an ABET accredited institution with 4+ years of engineering experience, or a Master's or PhD in an applicable Engineering discipline from an ABET accredited institution with 2+ years of engineering experience.

Applicable Knowledge, Skills and Abilities Required:
  • Demonstrated ability to communicate expectations clearly using verbal and written practices with customers / stakeholders, and with team members.
  • Demonstrated ability to work effectively under the requirements of schedules and shifting priorities.
  • Demonstrated ability to perform fluid mechanics, thermodynamics, heat transfer, piping network calculations, and engineering mechanics calculations including statics, stress, strain, and deflection.
  • Basic understanding of electrical engineering concepts such as current, voltages, resistance, frequencies, and speed requirements.
  • Demonstrated ability to create and read mechanical drawings, including piping and instrumentation diagrams (P&ID) and process piping flow schematics.
  • Demonstrated ability in performing mass and energy balance calculation on various hydraulic and heat transfer components.
  • Demonstrated ability in performing heat transfer calculations to size heat exchangers.
  • Demonstrated knowledge of machine shop practices and techniques.
  • Demonstrated knowledge of piping flexibility analysis is desirable.
  • Must have strong computing skills including preparing and documenting engineering calculations, creating 3D models and 2D drawings using CAD software data presentation, and project management activities (cost estimates, schedules).
  • Familiarity of CAD software for the creation of piping fluid flow network systems is a plus.
  • Demonstrated ability to creatively solve engineering problems and troubleshoot operational issues.
  • Knowledge of welding and brazing practices (e.g., TIG, MIG and torch brazing) as related to manufacturing and fabrication of piping is desirable.
  • Knowledge of materials, metallurgy, and radiation damage of materials is desirable.
  • Knowledge of codes and standards such as ASME, AISC, CGI, API and ANSI/ASME pressure vessel and piping codes is desirable.
  • Use of geometric dimensioning and tolerancing on drawings per ASME Y14.5 is desirable.
  • Skills or experience in AFT Fathom, AFT Arrow, and ANSYS Workbench are desirable.
  • Skills or experience in AutoCAD Plant are desirable.

Work Arrangement:
Please note that the described work arrangement is subject to change based on business needs and is not guaranteed to be final.

  • Onsite: This is an onsite role, and the candidate must be able to work from our Batavia office.

Benefits/Perks:

Fermilab offers a competitive and comprehensive benefits program, including:

  • Medical, Dental, Vision and Flexible Spending Accounts

  • Paid time off

  • Life insurance

  • Short and Long-term disability insurance

  • Retirement benefits

  • Onsite day care

Why Fermilab:
Fermilab is America's premier laboratory for particle physics and accelerator research, funded by the U.S. Department of Energy. We support discovery science experiments in Illinois and locations around the world, including deep underground mines in South Dakota and Canada, mountaintops in Arizona and Chile, CERN in Europe and the South Pole.

Pre-Employment Screening:


Drug-Free Workplace & Pre-Employment Screening

Fermilab is dedicated to fostering a safe, productive and drug-free environment. An offer of employment is contingent upon the successful completion of a background check and drug screening.

HSPD-12

In accordance with Homeland Security Presidential Directive 12 (HSPD-12) new employees are required to obtain and maintain a HSPD-12 Personal Identity Verification (PIV) Credential. To obtain this credential, new employees must successfully complete and pass a federal background check investigation. This investigation includes a declaration of illegal drug activities, including use, supply, possession, or manufacture. This includes marijuana and cannabis derivatives, which are still considered illegal under federal law, regardless of state laws. Failure to obtain or maintain such government access authorization could result in the withdrawal of a job offer or future termination of employment.

Foreign Government Sponsored Activities

Fermilab employees, and certain guest researchers and contractors, are subject to particular restrictions related to participation in Foreign Government Sponsored or Affiliated Activities, as defined and detailed in United States Department of Energy Order 486.1A. Such individuals will be asked to disclose any participation for review by Fermilab's Office of General Counsel.

REAL-ID Requirement for access to Fermilab Campus
Fermilab requires all members of the public to produce a REAL-ID, or equivalent, to access the Fermilab Campus for interviews or career events. A list of acceptable forms of ID can be found here: https://get-connected.fnal.gov/wp-content/uploads/2021/09/REALID-Documents.pdf. If a candidate is selected for an interview but does not possess any of the equivalent documents, we may schedule a virtual interview.

Equal Opportunity Statement

Fermilab is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories.

What Fermilab employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply