ZipRecruiter

Log In

1

Weld Inspection Jobs in Wisconsin (NOW HIRING)

TEAM, Inc.

Certified Welding Inspector

Milwaukee, WI · On-site

$26.75 - $36.25/hr

The successful candidate will verify weld quality through visual inspection and nondestructive examination coordination, ensure compliance with applicable codes and standards, and support client QA/Q ...

next page

Showing results 1-20

All JobsWeld Inspection JobsWeld Inspection Jobs in Wisconsin

Weld Inspection information

See Wisconsin salary details

$12

$23

$38

How much do weld inspection jobs pay per hour?

As of Jun 17, 2026, the average hourly pay for weld inspection in Wisconsin is $23.88, according to ZipRecruiter salary data. Most workers in this role earn between $17.84 and $27.74 per hour, depending on experience, location, and employer.

How do I become a weld inspector?

To become a weld inspector, you typically need to complete a high school diploma or equivalent, gain experience in welding or fabrication, and obtain certification such as the AWS Certified Welding Inspector (CWI). Knowledge of welding processes, inspection techniques, and safety standards is essential, and ongoing training may be required to maintain certification.

Can you make $100,000 as a welder?

Welders can earn $100,000 or more annually, especially with advanced skills, certifications, and experience in high-demand industries like oil and gas, aerospace, or construction. Factors such as location, specialization, and the complexity of projects influence earning potential, and some welders work overtime or in hazardous environments that offer higher pay.

What are some common challenges faced by weld inspectors on large construction projects?

Weld inspectors on large construction projects often encounter challenges such as coordinating with multiple teams to schedule inspections without disrupting project timelines, interpreting complex blueprints and welding codes, and ensuring consistent quality across varied environments. They must also document findings thoroughly and communicate effectively with welders and project managers to address any non-conformities. Navigating changing site conditions and maintaining safety standards adds to the complexity, making attention to detail and adaptability crucial for success in this role.

Is welding inspection a good career?

Welding inspection is a stable career that involves examining welds for quality and safety, often requiring certifications such as AWS or ASNT. It offers opportunities in manufacturing, construction, and energy sectors, with a typical schedule involving on-site inspections and the need for attention to detail and technical skills.

How much do welding inspectors make hourly?

Welding inspectors typically earn between $20 and $35 per hour, depending on experience, certifications, and location. Certified inspectors with specialized skills or working in high-demand industries may earn higher wages. The role often requires knowledge of welding codes, inspection tools, and safety standards.

What is weld inspection?

Weld inspection is the process of evaluating welded joints to ensure they meet specific safety, quality, and regulatory standards. Inspectors use visual assessments, measurement tools, and sometimes advanced techniques like ultrasonic or X-ray testing to detect flaws such as cracks, porosity, or incomplete fusion. The goal is to verify that the welds are structurally sound and meet the required specifications. Proper weld inspection helps prevent failures in structures, machinery, and pipelines, ensuring reliability and safety.

What is the difference between Weld Inspection vs NDT Technician?

AspectWeld InspectionNDT Technician
CertificationsASNT Level I/II, AWS Certified Welding Inspector (CWI)ASNT Level I/II, Level III, specific NDT methods certifications
Work EnvironmentConstruction sites, manufacturing plants, oil & gas facilitiesIndustrial, aerospace, power plants, manufacturing
Job FocusInspecting welds for quality, compliance, and safetyPerforming non-destructive testing methods on materials and welds

Weld Inspection primarily involves evaluating weld quality and ensuring compliance with standards, often requiring specific certifications like AWS CWI. NDT Technicians perform various non-destructive testing methods to detect flaws in materials, which may include welds. While both roles require similar certifications and work in industrial environments, Weld Inspectors focus on visual and dimensional assessments of welds, whereas NDT Technicians use specialized testing techniques to assess material integrity.

What are the key skills and qualifications needed to thrive as a Weld Inspector, and why are they important?

To thrive as a Weld Inspector, you need a solid understanding of welding processes, metallurgy, industry codes, and standards, often supported by certifications such as AWS Certified Welding Inspector (CWI). Familiarity with inspection tools like ultrasonic testers, radiographic equipment, and documentation systems is crucial. Attention to detail, analytical thinking, and effective communication are important soft skills for accurately assessing weld quality and reporting findings. These skills ensure weld integrity, safety compliance, and the overall quality of construction or manufacturing projects.
What are popular job titles related to Weld Inspection jobs in Wisconsin? For Weld Inspection jobs in Wisconsin, the most frequently searched job titles are:
What job categories do people searching Weld Inspection jobs in Wisconsin look for? The top searched job categories for Weld Inspection jobs in Wisconsin are:
What cities in Wisconsin are hiring for Weld Inspection jobs? Cities in Wisconsin with the most Weld Inspection job openings:
Weld Inspection jobs near you
CWI Welding Inspector Supervisor

CWI Welding Inspector Supervisor

JARP Industries Inc

Schofield, WI

$30.25 - $41/hr

Other

Medical, Dental, Vision, Life, Retirement, PTO

Posted 28 days ago

Job description

Description

POSITION SUMMARY:

The Certified Welding Inspector (CWI) supervisor carries out tasks as part of the Weld team in support of JARP Operations and JARP Engineering. Frequent and direct interaction with interested parties such as JARP employees, customers and suppliers is required, along with communication across the business. The CWI supervisor will be responsible for welding standards, procedures, instructions, prints and equipment, providing monitoring, measurement and analysis services of weld operations and processes, and assisting in driving improvement methodologies related to weld across the business. Hiring, mentoring and training of new employees.


ESSENTIAL DUTIES AND RESPONSIBILITIES:

1.  Responsible for standards, specifications, techniques, processes, procedures, instructions, forms and other documents related to JARP's welding processes (ex: AWS D1.1, AWS D14.9, ASME IX, OI, WI, SWI, ECT.).

2. Research and development of new technology

3. Budget creation, Adherence and tracking.

4. Cost analysis of designs and cost reductions where possible.

5. Perform return on investments analysis on capital investments.

6. Support Operations in the day-to-day verification and visual inspection (VT) of welded products and of welding processes, to ensure ongoing compliance with all federal, state, and industry welding regulations.

7. Support Engineering in the understanding of customer requirements relating to weld, and in the evaluation of usual, unusual or otherwise complex materials, heating requirements or other material science related to product performance and functionality.

8. Creation of, or prepare, technical reports related to welding as required.

9. Coordinate and perform the continued training and evaluation of all JARP welders to ensure conformance with all related standards, and provide CWI or other American Welding Society (AWS) support and development as necessary to individuals or the business.

10. Day-to-day support in the investigation of JARP customer complaints when required.

11. Support of Root Cause Analysis for instances of nonconformance with products and services involving welded components.

12. Assist with returned / nonconforming product and material as part of JARP's Warranty Evaluation process as required.

13. Overall responsibility for following JARP's internal Quality Management System (QMS) audit program as a member of the Quality team, with specific focus on welding processes and documentation.

14. Manage welding team with Continuous Improvement (CI) projects. 

15. Help Identify nonconformities such as repeat weld related issues with orientation, weld leaks, weld quality. 

16. Manage design of jigs and fixtures as well as designing of fixtures.

17.  Authority of PQR/ WPS welder qualification to AWS D1.1, AWS D 14.9, AWS B2., IX ASME.

18. Maintains basic welding equipment. Schedule maintenance with welding equipment failures, verify calibration of welding equipment.

19. Verifying welding consumables shelf life. 

20. New jobs, first time run inspection and sign off. 

21. Create, manage, and approve change requests for engineering approval.

22. Manage projects (R&D) Development with Engineering.


SUPERVISORY RESPONSBILITIES:

1. Certified Welding Inspectors 1 and 2

2. Robotic Programmers 

3. Weld Leads (indirect)

4. Weld trainers (indirect)

Requirements

EDUCATION AND EXPERIENCE:

1. 5 years minimum cumulative experience in similar or related roles, preferably within a manufacturing or engineering environment (e.g. CWI, Welder, robotic welding, Welding Engineer etc.).

2. 3-5 years supervisory experience 

3. Mentoring and training of individuals and small groups is required.


LICENCES AND CERTIFICATIONS: 

American Welding Society (AWS) - Certified Welding Inspector (CWI) credentials and up to date.


Further areas of study that would be desirable are:

1. AWS Certified welding Supervisor 

2. ASME endorsement 

3. Military welding code Navsea etc...

4. Certified Process Analyst

5. Six Sigma (Yellow / Green belt)

6. Certified Reliability Engineer

7. PT and MT certified to ANSI

8. UT in house testing. 

Other certifications held by the individual will be reviewed for suitability towards successfully performing the role.


QUALIFICATIONS AND SKILLS:

1. Excellent technical drawing and blueprint interpretation skills.

2. Knowledge of PQR/ WPS to AWS D1.1 

3. Working knowledge of NDT/ NDE techniques.

a. Ability to perform magnetic particle inspection (MT) and Dye penetrant testing (PT) to ANSI or obtain within pre-determined time frame. 

4. Good strategic abilities - can understand situations quickly and carry out suitable measures and countermeasures.

5. Strong team working abilities; will not dismiss or rebuff others and can demonstrate the capability to agree or disagree constructively when necessary.

6. Good negotiation skills and the ability to resolve issues by identifying effective courses of action.

7. Goal-oriented, with the ability to self-prioritize effectively.

8. First class communication skills, with the ability to interact appropriately with all levels of the business.

9. Excellent writing, reading, oral and technical presentation skills.

10. Excellent computer literacy, including the ability to adapt quickly to new software, technology and similar.


The following qualification subjects and / or skills (or similar) are not essential to the role but are highly desirable:

1. Quality Management System (QMS) Auditor

2. Working knowledge of mechanical and / or hydraulic systems

3. Technical writing

4. Process analysis

5. CAD

What You'll Love About Working Here

We offer a full, comprehensive benefits package designed to support you and your family, including:

  • Paid Time Off (PTO)
  • 10 paid holidays
  • Medical, dental, and vision insurance
  • HSA and FSA options
  • Company-paid life and AD&D insurance
  • Company-paid Short-term disability (STD)
  • Company-paid Long-term disability  (LTD)
  • Employee Assistance Program (EAP)
  • 401k
  • Benefit eligibility begins on the first day of the month following your hire date 

Apply