ZipRecruiter

Log In

1

Weekend Wind Turbine Rigger Jobs in Virginia (NOW HIRING)

TreeServe LLC

Climber

Fairfax, VA · On-site

$20 - $35/hr

The Climber performs advanced aerial tree care operations, including climbing, pruning, rigging ... Work schedule may include early mornings, evenings, and occasional weekends based on project needs.

Vantage Aviation FCI

Maintenance Supervisor

Richmond, VA · On-site

$80K - $100K/yr

... and turbine maintenance services are all within our scope of capability and expertise. Vantage ... Must be able to work flexible schedules, including evenings, weekends, holidays, and on-call shifts ...

Vantage Aviation FCI

Maintenance Supervisor

Richmond, VA

$80K - $100K/yr

... and turbine maintenance services are all within our scope of capability and expertise. Vantage ... Must be able to work flexible schedules, including evenings, weekends, holidays, and on-call shifts ...

Vantage Aviation

Maintenance Supervisor

Richmond, VA · On-site

$80K - $100K/yr

... and turbine maintenance services are all within our scope of capability and expertise. Vantage ... Must be able to work flexible schedules, including evenings, weekends, holidays, and on-call shifts ...

Vantage Aviation

Maintenance Supervisor

Richmond, VA · On-site

$80K - $100K/yr

... and turbine maintenance services are all within our scope of capability and expertise. Vantage ... Must be able to work flexible schedules, including evenings, weekends, holidays, and on-call shifts ...

Pike Corporation

Foreman-Transmission (AEP)

Abingdon, VA · On-site

$55.66 - $58/hr

Proficient in all aspects of heavy lifting and rigging. * Operate and maintain bucket trucks ... Work outdoors in varying environmental conditions, including extreme heat, cold, rain, wind, and ...

Sunbelt Rentals

Road Mechanic-Level 2

Chatham, VA · On-site

$25.71 - $35.35/hr

An understanding of safe rigging and lifting practices to perform large component removal and ... wind or excessive temperatures and/or night and weekend work. All duties must be performed ...

Sunbelt Rentals, Inc.

Road Mechanic-Level 2

Chatham, VA · On-site

$25.71 - $35.35/hr

An understanding of safe rigging and lifting practices to perform large component removal and ... wind or excessive temperatures and/or night and weekend work. All duties must be performed ...

Sunbelt Rentals

Road Mechanic-Level 2

Chatham, VA · On-site

$25.71 - $35.35/hr

An understanding of safe rigging and lifting practices to perform large component removal and ... wind or excessive temperatures and/or night and weekend work. All duties must be performed ...

All JobsWind Turbine Rigger JobsWeekend Wind Turbine Rigger JobsWeekend Wind Turbine Rigger Jobs in Virginia

Weekend Wind Turbine Rigger information

What is the difference between Weekend Wind Turbine Rigger vs Wind Turbine Technician?

AspectWeekend Wind Turbine RiggerWind Turbine Technician
CertificationsOSHA safety training, rigging certificationsOSHA safety training, electrical and mechanical certifications
Work EnvironmentConstruction sites, outdoor turbine installationsOperational turbines, maintenance sites
Job FocusAssembling and installing turbine componentsMaintaining, troubleshooting, repairing turbines

Weekend Wind Turbine Riggers primarily focus on assembling and installing turbines during scheduled work hours, often on construction sites. Wind Turbine Technicians handle ongoing maintenance and repairs once turbines are operational. While both roles require safety certifications and work outdoors, their responsibilities differ in installation versus maintenance tasks.

What are the most commonly searched types of Wind Turbine Rigger jobs in Virginia?

The most popular types of Wind Turbine Rigger jobs in Virginia are:

What cities in Virginia are hiring for Weekend Wind Turbine Rigger jobs?

Cities in Virginia with the most Weekend Wind Turbine Rigger job openings:

Weekend Wind Turbine Rigger jobs near you

PUMP MECHANIC

Electric Motor & Contracting

Chesapeake, VA • On-site

Full-time

Medical, Dental, Vision

Re-posted 6 days ago

Job description

Electric Motor & Contracting Company, Inc., founded in 1960, is one of the largest independently owned repair facilities for electrical rotating machinery, pumps, and switchgear in the United States. We are conveniently located in Hampton Roads, Virginia, just miles from Virginia Beach and Norfolk.
Our company prides itself on:

  • Maintaining a clean, state-of-the-art facility
  • Providing quality service to our customers
  • Employing and retaining great people
  • Our shop is AIR CONDITIONED!!!


We are currently seeking a Pump Mechanic.
Job Summary

The Pump Mechanic is responsible for the disassembly, mechanical inspection, troubleshooting, and re-assembly of all types, sizes, and configurations of pumps and blowers to include Submersible Pumps, Close-Coupled Pumps, End Suction Radial Pumps, Vertical Turbine Pumps, Axial Split Case Pumps, and Centrifugal Pumps/Blowers.

This position reports directly to the shop foreman/assistant foreman and has no supervisory responsibilities.

Job Requirements:

Education, Experience, and Knowledge

  • High School Diploma or Certificate from applicable trade/technical school, combined with 5+ years in the rotating machinery industry. Qualified individuals with 10+ years of hands-on experience in lieu of trade school certification will be eligible for consideration.
  • Basic 3 phase electrical knowledge and familiarity with standard electrical testing equipment, to include: megohmmeters, multimeters, ammeters, winding resistance meters, Low/High Voltage Test Panels, etc. (Will train qualified candidates on electrical parameters if necessary).
  • Demonstrated hands-on experience with vertical turbine pumps, including installation, operation, troubleshooting, and maintenance.
  • Strong working knowledge of vertical turbine pump design, components, and performance characteristics.
  • Ability to diagnose and resolve mechanical and hydraulic issues specific to vertical turbine systems.
  • Ability to accurately and effectively use typical mechanical measuring equipment to include Inside/Outside Micrometers, vernier calipers, depth gauges, steel rulers, etc. (typical measuring equipment utilized daily in a machine shop environment).
  • Accurately and effectively read, understand, and interpret pump specific technical manuals, component drawings and sketches, follow industry standards and practices, interpret, and follow customer specifications/requirements and company policies/procedures.
  • Ability to solve complex problems with clear analytical thought, considering multiple factors and tradeoffs.

Job Duties

  • Disassemble, troubleshoot, and reassemble various types of motor-driven pumps and blowers.
  • Effectively clean and prepare mechanical/electrical components for inspection using typical shop equipment to include sandblasters, cabinet blasters, dip tanks, steam wash pits, bake ovens, etc.
  • Examine parts for defects, such as eccentricities, rubs, wear, excessive damage, etc.
  • Perform detailed mechanical and visual component inspections to determine root cause of failure, documenting all relevant ‘As-Found’ data (register fits, internal bores, outer diameters, etc.) on applicable forms.
  • Recommend disposition on company job cards and Customer spec sheets.
  • Perform service calls for emergency breakdowns, if necessary.
  • Safely oversee lifting/ rigging of all equipment, weighing upwards of 25 tons.
  • Lead and mentor less experienced mechanics throughout each phase of the repair process.
  • Balance rotating assemblies to an industry standard of 4W/N, utilizing all shop balancing equipment.
  • Perform hydrostatic pressure testing on refurbished pumps, prior to shipment back to customer.
  • Perform criteria acceptance testing on close coupled pump motors, submersible pump motors, etc.

Qualified candidates must:

  • Provide own tools and basic measuring equipment (Large/Specialty tooling and electrical testing equipment is provided by the company).
  • Have excellent verbal and written communication skills.
  • Be willing and able to maintain availability and dependability, as this position requires a flexible work schedule, to include extended hours, nights, and weekends, when required (Overtime).
  • Must be physically able to safely operate equipment, able to lift and carry up to 50 pounds, and capable of standing/stooping/kneeling for long periods of time.
  • We are a service industry on call to our customers 24/7/265. To meet our customers’ needs, employees must be able to work overtime as needed, including extending hours outside of the assigned shift. This also includes weekends/holidays.
  • Must be a good communicator, have a positive attitude, able to follow written and verbal instructions.

NOTE: This position requires drug and background screening.

Why Join Electric Motor & Contracting Co., Inc.?

  • Competitive salary based on experience.
  • Comprehensive health, dental, and vision benefits.
  • A supportive and safety-conscious work environment.
  • Career growth opportunities within the company.
  • Access to ongoing training and professional development.

How to Apply:

If you’re interested in joining our team, please click the “Apply” button at the bottom of this posting and complete the application. You may also submit your resume and salary requirements to jobs@emc-co.com. For more information, visit www.emc-co.com or call (757) 487-2121.

Electric Motor & Contracting Co., Inc. is an equal-opportunity employer. We encourage candidates from all backgrounds to apply.

Apply