ZipRecruiter

Log In

1

Weekend Investment Casting Jobs (NOW HIRING)

Howmet Aerospace

Production Generalist

Hampton, VA · On-site

$21.07/hr

The ability to work overtime and weekends is required as schedules may vary based on operational ... These openings are with Howmet Aerospace - a world leader in investment casting of super-alloys ...

Howmet Aerospace

IGT FPI Processor

Hampton, VA · On-site

$25.26/hr

The ability to work overtime and weekends is required as schedules may vary based on operational ... This opening is with Howmet Aerospace - a world leader in investment casting of superalloys ...

MPI Systems

Field Service Engineer

Poughkeepsie, NY · On-site +1

$38 - $42/hr

Customer-site work may include weekend stays and travel at varying times to meet customer needs ... Work is focused on Investment Casting applications, including wax room injection, assembly, and ...

Howmet Aerospace

IGT FPI Processor

Hampton, VA · On-site

$25.26/hr

This opening is with Howmet Aerospace - a world leader in investment casting of superalloys ... The ability to work overtime and weekends is required as schedules may vary based on operational ...

Howmet Aerospace

Production Generalist

Hampton, VA · On-site

$21.07/hr

These openings are with Howmet Aerospace - a world leader in investment casting of super-alloys ... The ability to work overtime and weekends is required as schedules may vary based on operational ...

Howmet Aerospace

IGT FPI Processor

Hampton, VA · On-site

$25.26/hr

This opening is with Howmet Aerospace - a world leader in investment casting of superalloys ... The ability to work overtime and weekends is required as schedules may vary based on operational ...

Howmet Aerospace

HSC Monoshell Operator

Hampton, VA · On-site

$23.41/hr

The ability to work overtime and weekends is required as schedules may vary based on operational ... This opening is with Howmet Aerospace - a world leader in investment casting of superalloys ...

NOV, Inc.

Foundry Worker

Marble Falls, TX · On-site

$15.25 - $19.75/hr

Prior experience or familiarity with the investment casting (lost wax) process preferred JOB REQUIREMENTS * Must be willing and able to work overtime as needed, including weekdays, weekends, and ...

National Oilwell Varco

Foundry Worker

Marble Falls, TX

$15.25 - $19.75/hr

Prior experience or familiarity with the investment casting (lost wax) process preferred JOB REQUIREMENTS * Must be willing and able to work overtime as needed, including weekdays, weekends, and ...

NOV, Inc.

Foundry Worker

Marble Falls, TX · On-site

$15.25 - $19.75/hr

Prior experience or familiarity with the investment casting (lost wax) process preferred JOB REQUIREMENTS * Must be willing and able to work overtime as needed, including weekdays, weekends, and ...

Howmet Aerospace

Production Generalist

Hampton, VA

$21.07/hr

These openings are with Howmet Aerospace - a world leader in investment casting of super-alloys ... The ability to work overtime and weekends is required as schedules may vary based on operational ...

Magna

Process Engineer - Casting

Birmingham, AL

We invest in our employees, providing them with the support and resources they need to succeed. As ... Provide support for three shifts and weekend production schedule as required by management

Magna

Process Engineer - Casting

Birmingham, AL · On-site

We invest in our employees, providing them with the support and resources they need to succeed. As ... Provide support for three shifts and weekend production schedule as required by management

previous page

Showing results 41-60

All Jobsinvestment casting Jobsweekend JobsWeekend Investment Casting Jobs

Weekend Investment Casting information

See salary details

$5

$18

$33

How much do weekend investment casting jobs pay per hour?

As of Sep 6, 2026, the average hourly pay for weekend investment casting in the United States is $18.94, according to ZipRecruiter salary data. Most workers in this role earn between $15.38 and $17.79 per hour, depending on experience, location, and employer.

What cities are hiring for Weekend Investment Casting jobs?

Cities with the most Weekend Investment Casting job openings:

What are the most commonly searched types of Investment Casting jobs?

The most popular types of Investment Casting jobs are:

What states have the most Weekend Investment Casting jobs?

States with the most job openings for Weekend Investment Casting jobs include:

Weekend Investment Casting jobs near you

Sr. Manufacturing Engineer, Blades and Vanes

SpaceX

Bastrop, TX • On-site

$90K - $123K/yr

Full-time

Posted 4 days ago

SpaceX rating

8.7

Company rating: 8.7 out of 10

Based on 152 frontline employees who took The Breakroom Quiz

16th of 72 rated aerospace companies

Job description

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
SR. MANUFACTURING ENGINEER, BLADES AND VANES
Working directly in the materials engineering group, this position owns equipment installation, commissioning, and process development for selected areas the blades and vanes investment casting line, from ceramic cores through wax, shell, and cast. A counterpart owns post-cast operations (shell removal through coating). Experience in any cores-through-cast area is welcome. The role starts with commissioning, then transitions to process ownership in the area where the engineer is strongest, always with a strong equipment foundation.
RESPONSIBILITIES:
  • Lead commissioning, Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), supplier management, and customization of pre-cast equipment, including VIM furnaces, ceramic and wax injection machines, shell dip lines, and thermal systems (kilns, dewax autoclaves, burnout and preheat furnaces).
  • Coordinate supplier-defined facilities and services: power, water, waste, controls, network, connectivity, and MES.
  • After commissioning, take process ownership of assigned cores-through-cast operations, drive production-ready capability, and own cost, rate, yield, and quality.
  • Specify, design, and implement tools, fixtures, process aids, and additional equipment to hit rate, quality, and yield targets.
  • Develop and maintain work instructions, process specifications, PFMEAs, control plans, and change-control documentation.
  • Own EHS and process safety for assigned equipment, including high-temperature, vacuum, pressure, and chemical operations.
  • Troubleshoot equipment and process issues on the floor; lead root-cause analysis and implement robust corrections.
  • Collaborate with Materials, Design, Quality, Facilities, Controls, Production, Maintenance/Reliability, and EHS, including technicians and operators.
  • Lead technical projects and mentor junior engineers and technicians; provide technical guidance and promote skill growth and team cohesion. Senior individual-contributor role, not a people-manager position.

BASIC QUALIFICATIONS:
  • Bachelor's degree in mechanical, manufacturing, industrial, electrical, chemical, materials science, or other engineering discipline.
  • 5+ years of equipment, manufacturing, or process engineering, including hands-on installation, commissioning, FAT/SAT, and supplier management.

PREFERRED SKILLS AND EXPERIENCE:
  • Experience in at least one major area of investment casting or a closely related high-temperature/precision process, and the ability to learn the full cores-through-cast flow.
  • Strong mechanical aptitude with working knowledge of electrical, controls, automation, and facilities. Able to support or transition into maintenance and reliability for assigned equipment.
  • Works independently, delivers under tight schedules, and communicates effectively with suppliers, technicians, and cross-functional partners.
  • Direct experience with VIM furnaces, ceramic/wax injection, kilns/ovens, autoclaves, dip lines, core leachers, HIP, heat treat, AGVs, or related process equipment.
  • Breadth across mechanical, electrical, materials, controls, and automation.
  • Experience integrating equipment with MES and plant networks.
  • Lean/Six Sigma or equivalent structured problem-solving.
  • Prior mentoring of engineers and technicians, or technical leadership of project teams.
  • Aerospace, energy, or other high-reliability casting or precision manufacturing.
  • Hands-on maintenance, reliability, or equipment-sustainment experience.

ADDITIONAL REQUIREMENTS:
  • Travel approximately 15% for equipment commissioning and FATs; extended hours or weekends as required during commissioning and ramp.
  • Ability to lift up to 25Ibs unassisted.
  • Standing/walking for long periods of time.
  • Willingness to work long hours and weekends as necessary to accommodate manufacturing and test campaigns.

ITAR REQUIREMENTS:
  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

What SpaceX employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

SpaceX logo

About SpaceX

Sourced by ZipRecruiter

Industry

Aerospace product and parts manufacturing, data services, guided missile and space vehicle manufacturing and satellite telecommunications

Company size

1,001 - 5,000 Employees

Headquarters location

Hawthorne, CA, US

View All SpaceX Jobs

Apply