ZipRecruiter

Log In

1

Visual Dimensional Inspector Jobs in Philadelphia, PA

DRYTECH INC

Quality Inspector

Cookstown, NJ · On-site

$19 - $25/hr

Perform dimensional and visual inspections using precision measurement equipment such as calipers, micrometers, gauges, scales, fixtures, and other inspection and test equipment . * Operate ...

GWYNEDD

Quality Inspector

North Wales, PA

Conduct dimensional and visual inspections using precision measurement tools (calipers, micrometers, height gauges, pin gauges, etc.) * Apply AQL and sampling plans as required for incoming ...

TheMasonGroup

Maintenance Mechanic

Willow Grove, PA

$24.75 - $31.75/hr

Proficiency in visual and dimensional inspection of associated parts. * Ability to work independently and efficiently. * Advanced troubleshooting skills for equipment and systems. * Basic knowledge ...

Consolidated Machine & Tool

First Article Inspector

NJ · On-site

$20 - $40/hr

Performing visual and dimensional inspections on incoming, in-process, and finished parts * Reviewing drawings, specifications, and technical documents to ensure compliance * Preparing and ...

GWYNEDD

Quality Inspector

North Wales, PA

$20 - $22/hr

Conduct dimensional and visual inspections using precision measurement tools (calipers, micrometers, height gauges, pin gauges, etc.) * Apply AQL and sampling plans as required for incoming ...

Cadrex Southampton

Quality Inspector III

Southampton, PA · On-site

$25 - $32/hr

Visual inspection of product according to customer requirements * Perform first piece, in-process ... Participate in internal process audits including dimensional workmanship and documentation ...

Eaton

Quality Inspector - 1st Shift

Glenolden, PA · On-site

$24/hr

Responsibilities include dimensional and visual inspections using precision measuring instruments such as calipers, micrometers, optical comparators, and other precision inspection equipment. The ...

Eaton

Quality Inspector - 1st Shift

Glenolden, PA · On-site

$24/hr

Responsibilities include dimensional and visual inspections using precision measuring instruments such as calipers, micrometers, optical comparators, and other precision inspection equipment. The ...

previous pagenext page

Showing results 21-40

All JobsVisual Dimensional Inspector JobsVisual Dimensional Inspector Jobs in Philadelphia, PA

Visual Dimensional Inspector information

See Philadelphia, PA salary details

$17

$22

$31

How much do visual dimensional inspector jobs pay per hour?

As of Sep 2, 2026, the average hourly pay for visual dimensional inspector in Philadelphia, PA is $22.90, according to ZipRecruiter salary data. Most workers in this role earn between $20.62 and $23.75 per hour, depending on experience, location, and employer.

What is a visual dimensional inspector?

A Visual Dimensional Inspector is a quality control professional responsible for examining manufactured parts or products to ensure they meet specified visual and dimensional standards. They use precision measuring tools, such as calipers, micrometers, and gauges, to verify that components conform to technical drawings and tolerances. Additionally, they inspect for surface defects, proper finishes, and overall workmanship. Their work helps maintain product quality and ensures compliance with industry regulations.

What are the key skills and qualifications needed to thrive as a visual dimensional inspector, and why are they important?

To thrive as a Visual Dimensional Inspector, you need a strong background in metrology, blueprint reading, and measurement techniques, often supported by a high school diploma or technical certification. Familiarity with precision measurement instruments such as calipers, micrometers, coordinate measuring machines (CMM), and quality control software is typically required. Strong attention to detail, problem-solving abilities, and effective communication skills help inspectors excel in identifying discrepancies and collaborating with manufacturing teams. These skills ensure products meet exact specifications, maintain safety standards, and support efficient production processes.

What are some common challenges faced by visual dimensional inspectors when working with complex parts?

Visual Dimensional Inspectors often encounter challenges when inspecting parts with intricate geometries or tight tolerances. Accurately measuring and evaluating such components requires keen attention to detail and a strong understanding of measurement tools, such as calipers, micrometers, and coordinate measuring machines (CMMs). Collaboration with engineering and production teams is crucial to resolve discrepancies and ensure parts meet quality standards. Staying up to date with evolving inspection technologies and maintaining meticulous documentation are key to overcoming these challenges and contributing to the overall quality assurance process.

What is the difference between Visual Dimensional Inspector vs Mechanical Inspector?

AspectVisual Dimensional InspectorMechanical Inspector
CertificationsOften requires certifications like ASQ or equivalentTypically requires certifications in mechanical systems or ASQ certifications
Work EnvironmentManufacturing, quality control labs, production linesManufacturing plants, assembly lines, quality assurance departments
Job FocusInspecting visual and dimensional aspects of productsInspecting mechanical components and assemblies for defects
Common UsageUsed in industries like aerospace, automotive, electronicsUsed in manufacturing, machinery, and equipment industries

The Visual Dimensional Inspector primarily focuses on inspecting products visually and measuring dimensions to ensure quality standards. In contrast, the Mechanical Inspector evaluates mechanical components for defects and proper assembly. Both roles require similar certifications and are vital in manufacturing industries, but their focus areas differ, with the Visual Dimensional Inspector emphasizing visual and dimensional accuracy, and the Mechanical Inspector concentrating on mechanical integrity and function.

What are the duties of a visual dimensional inspector?

A visual dimensional inspector examines manufactured parts and products to ensure they meet specified dimensions, tolerances, and quality standards using tools like calipers, micrometers, and gauges. They document inspection results, identify defects or deviations, and may use measurement software or coordinate measuring machines (CMMs) as part of their quality control process.

What are popular job titles related to Visual Dimensional Inspector jobs in Philadelphia, PA?

For Visual Dimensional Inspector jobs in Philadelphia, PA, the most frequently searched job titles are:

What job categories do people searching Visual Dimensional Inspector jobs in Philadelphia, PA look for?

The top searched job categories for Visual Dimensional Inspector jobs in Philadelphia, PA are:

What cities near Philadelphia, PA are hiring for Visual Dimensional Inspector jobs?

Cities near Philadelphia, PA with the most Visual Dimensional Inspector job openings:

Visual Dimensional Inspector jobs near you
Infographic showing various Visual Dimensional Inspector job openings in Philadelphia, PA as of July 2026, with employment types broken down into 1% As Needed, 68% Full Time, 27% Part Time, 1% Temporary, 2% Contract, and 1% Nights. Highlights an 93% Physical, 1% Hybrid, and 6% Remote job distribution, with an average salary of $47,623 per year, or $22.9 per hour.

Quality Inspector

DRYTECH INC

Cookstown, NJ • On-site

$19 - $25/hr

Full-time

Posted 14 days ago

Job description

Location: Cookstown, NJ
Department: Quality Assurance
Reports To: Quality Manager
Employment Type: Full-Time
POSITION SUMMARY

Drytech Inc. is seeking a detail-oriented, mechanically inclined Quality Inspector to support the manufacture of precision products for the aerospace, defense, and industrial markets.
The Quality Inspector is responsible for performing incoming, in-process, and final inspections of components, assemblies, and finished products to verify compliance with engineering drawings, specifications, customer requirements, work instructions, and Drytech's AS9100 Quality Management System.
This is a hands-on manufacturing quality position. The successful candidate should be comfortable working directly with manufactured components, engineering drawings, precision measuring equipment, production personnel, engineers, and quality documentation.
Previous aerospace or manufacturing inspection experience is preferred; however, Drytech will consider mechanically inclined candidates with strong attention to detail and the aptitude to learn precision inspection techniques.
ABOUT DRYTECH

Drytech Inc., located in Cookstown, New Jersey adjacent to Joint Base McGuire-Dix-Lakehurst, designs and manufactures moisture-control and air-purification products used in demanding aerospace, defense, and industrial applications.
Our products include desiccators, molecular sieve filters, dehydrators, humidity indicators, and other engineered moisture-control systems supplied to the U.S. Department of Defense and major aerospace and defense contractors.
Drytech operates under an AS9100 Rev D Quality Management System, with a strong emphasis on product quality, traceability, configuration control, documentation, and customer satisfaction.
ESSENTIAL DUTIES & RESPONSIBILITIES

The Quality Inspector will:
  • Perform incoming, in-process, and final inspections of purchased components, manufactured parts, assemblies, and finished products.
  • Read and interpret engineering drawings, specifications, work instructions, bills of material, acceptance criteria, and customer requirements.
  • Perform dimensional and visual inspections using precision measurement equipment such as calipers, micrometers, gauges, scales, fixtures, and other inspection and test equipment.
  • Operate specialized product inspection and test equipment, including airflow, pressure, heat, and other functional test equipment as required.
  • Verify dimensional tolerances, workmanship requirements, material requirements, product configuration, and other specified acceptance criteria.
  • Accurately complete inspection reports, travelers, test records, acceptance documentation, and other quality records.
  • Maintain clear and accurate objective evidence demonstrating product conformity and inspection completion.
  • Verify that measurement and test equipment is within its required calibration period prior to use.
  • Identify, document, label, and segregate nonconforming material in accordance with Drytech procedures.
  • Initiate or support Nonconformance Reports and Material Review Board (MRB) activities when required.
  • Communicate inspection findings and quality concerns to Production, Engineering, Supply Chain, and Quality personnel.
  • Support First Article Inspection (FAI) activities and documentation in accordance with AS9102 requirements.
  • Verify product identification, serialization, lot control, material traceability, and configuration requirements.
  • Ensure proper identification and control of customer-supplied and government-furnished property when applicable.
  • Follow Foreign Object Debris/Damage (FOD) prevention requirements throughout manufacturing and inspection areas.
  • Support internal audits, customer audits, regulatory audits, and DCMA source inspections by providing accurate inspection records and objective evidence.
  • Assist Engineering and Quality personnel with root cause and corrective action (RCCA) investigations related to inspection findings and nonconforming product.
  • Identify recurring quality issues and communicate opportunities for process and product improvement.
  • Maintain a clean, organized, and safe inspection and manufacturing environment.
  • Follow all applicable safety procedures and required PPE when working around manufacturing equipment, chemicals, adhesives, cleaning agents, and other production materials.
REQUIRED QUALIFICATIONS

  • High School Diploma or GED.
  • Strong mechanical aptitude and ability to understand how mechanical components and assemblies fit and function together.
  • Strong attention to detail and ability to consistently identify small dimensional, workmanship, or documentation discrepancies.
  • Ability to follow detailed written procedures, drawings, specifications, and work instructions.
  • Ability to accurately document inspection results and maintain organized quality records.
  • Basic computer proficiency and ability to learn Drytech's electronic quality and manufacturing systems.
  • Strong written and verbal communication skills.
  • Ability to work independently while effectively communicating with Production, Engineering, and Quality personnel.
  • Willingness to complete required internal training, qualification, and certification programs.
PREFERRED QUALIFICATIONS

The following experience is preferred but not required:
  • 2-5 years of Quality Inspection experience in manufacturing, aerospace, defense, automotive, medical device, or another precision manufacturing environment.
  • Experience working within an AS9100 or ISO 9001 Quality Management System.
  • Experience reading engineering drawings and interpreting dimensional tolerances.
  • Experience with GD&T (Geometric Dimensioning and Tolerancing).
  • Experience using calipers, micrometers, gauges, inspection fixtures, and other precision measurement equipment.
  • Familiarity with AS9102 First Article Inspection requirements.
  • Experience with nonconforming material, MRB, corrective action, and root cause investigation processes.
  • Experience with ERP, MRP, MES, or electronic quality management systems.
  • Experience performing inspection or documentation activities for Department of Defense or aerospace customers.
PHYSICAL & WORK ENVIRONMENT REQUIREMENTS

This position is primarily performed within a manufacturing and quality inspection environment and requires the ability to:
  • Stand, walk, bend, reach, and work around manufacturing equipment throughout the workday.
  • Handle and inspect small components and precision assemblies.
  • Safely lift and move materials weighing up to approximately 35 pounds.
  • Work with or around adhesives, cleaning agents, manufacturing chemicals, compressed air, machinery, and other typical manufacturing processes.
  • Wear required personal protective equipment when applicable.
QUALITY & COMPLIANCE RESPONSIBILITIES

As a member of Drytech's Quality organization, the Quality Inspector is expected to:
  • Follow Drytech's AS9100 Quality Management System and all applicable procedures.
  • Maintain accurate, complete, and traceable quality records.
  • Protect product integrity and never accept or release product that does not meet documented requirements.
  • Immediately identify and communicate suspected nonconforming conditions.
  • Maintain independence and objectivity when making product acceptance decisions.
  • Support continuous improvement and corrective action activities.
  • Maintain strict adherence to documented processes, configuration requirements, and customer specifications.
DEFENSE & REGULATORY ENVIRONMENT

Because Drytech manufactures products for U.S. aerospace and defense applications, employees may work with information, products, or technical data subject to U.S. Government contractual and export-control requirements.
Candidates must be legally eligible to work with applicable ITAR-controlled technical data and products as required by the position.
The position may also require participation in customer, government, or regulatory inspections and audits.
WHAT WE'RE LOOKING FOR

The ideal Quality Inspector is someone who takes pride in getting things right.
We are looking for an individual who is:
  • Meticulous – notices details others may overlook.
  • Mechanically inclined – understands how parts, assemblies, and manufacturing processes work.
  • Accountable – takes ownership of inspection decisions and documentation.
  • Consistent – follows the same requirements regardless of schedule or production pressure.
  • Curious – asks questions when something does not look or measure correctly.
  • Organized – maintains accurate records and a disciplined inspection area.
  • Team-oriented – works effectively with Production and Engineering while maintaining the independence required of Quality.
  • Willing to learn – continuously develops inspection, measurement, drawing interpretation, and quality-system knowledge.
At Drytech, Quality Inspection is more than checking parts at the end of the manufacturing process. Our inspectors are an integral part of ensuring that products used in mission-critical aerospace and defense applications meet the requirements of our customers every time.